Compositions and sources of organic acids in fine particles (PM2.5) over the Pearl River Delta region, south China

Organic acids as important constituents of organic aerosols not only influence the aerosols' hygroscopic property, but also enhance the formation of new particles and secondary organic aerosols. This study reported organic acids including C14–C32fatty acids, C4–C9dicarboxylic acids and aromatic acids in PM2.5collected during winter 2009 at six typical urban, suburban and rural sites in the Pearl River Delta region. Averaged concentrations of C14–C32fatty acids, aromatic acids and C4– C9 dicarboxylic acids were 157, 72.5 and 50.7 ng/m3, respectively. They totally accounted for 1.7% of measured organic carbon. C20–C32fatty acids mainly deriving from higher plant wax showed the highest concentration at the upwind rural site with more vegetation around, while C14–C18fatty acids were more abundant at urban and suburban sites, and dicarboxylic acids and aromatic acids except 1,4-phthalic acid peaked at the downwind rural site. Succinic and azelaic acid were the most abundant among C4–C9dicarboxylic acids, and 1,2-phthalic and 1,4-phthalic acid were dominant aromatic acids. Dicarboxylic acids and aromatic acids exhibited significant mutual correlations except for 1,4-phthalic acid, which was probably primarily emitted from combustion of solid wastes containing polyethylene terephthalate plastics. Spatial patterns and correlations with typical source tracers suggested that C14–C32fatty acids were mainly primary while dicarboxylic and aromatic acids were largely secondary. Principal component analysis resolved six sources including biomass burning, natural higher plant wax, two mixed anthropogenic and two secondary sources; further multiple linear regression revealed their contributions to individual organic acids. It turned out that more than 70% of C14–C18fatty acids were attributed to anthropogenic sources, about 50%–85% of the C20–C32fatty acids were attributed to natural sources, 80%–95% of dicarboxylic acids and 1,2-phthalic acid were secondary in contrast with that 81% of 1,4-phthalic acid was primary.     

Metal distribution characteristic of MSWI bottom ash in view of metal recovery

Bottom ash is the major by-product of municipal solid waste incineration(MSWI), and is often reused as an engineering material, such as road-base aggregate. However, some metals(especially aluminum) in bottom ash can react with water and generate gas that could cause expansion and failure of products containing the ash; these metals must be removed before the ash is utilized. The size distribution and the chemical speciation of metals in the bottom ash from two Chinese MSWI plants were examined in this study, and the recovery potential of metals from the ash was evaluated. The metal concentrations in these bottom ashes were lower than that generated in other developed countries. Specifically, the contents of Al,Fe, Cu and Zn were 18.9–29.2, 25.5–32.3, 0.7–1.0 and 1.6–2.5 g/kg, respectively. Moreover,44.9–57.0 wt.% of Al and 55.6–75.4 wt.% of Fe were distributed in bottom ash particles smaller than 5 mm. Similarly, 46.6–79.7 wt.% of Cu and 42.9–74.2 wt.% of Zn were concentrated in particles smaller than 3 mm. The Fe in the bottom ash mainly existed as hematite, and its chemical speciation was considered to limit the recovery efficiency of magnetic separation.     

高效降解微囊藻毒素食酸戴尔福特菌USTB-04的培养与活性研究

主要针对筛选的高效降解微囊藻毒素(microcystins,MCs)的食酸戴尔福特菌USTB-04(Delftia acidovorans,DA菌)的培养方法进行了研究.结果表明,以葡萄糖、甘油和乙醇作为惟一碳源时,与氯化铵和尿素相比,酵母粉是支持DA菌生长的较好氮源.在以酵母粉作为惟一氮源时,与甘油和乙醇相比,葡萄糖是提高DA菌生长速度的较好碳源.进一步研究显示,以葡萄糖和酵母粉作为碳源和氮源时,可以支持DA菌的快速稳定生长,但在以甘油和酵母粉作为碳源和氮源时.培养出的DA菌降解MCs的比活性最高.此研究在培养高细胞浓度DA菌作为生物催化剂用于饮用水源中的MCs去除方面具有重要意义.     

Industrial Cluster Upgradation of Regenerated Resources in Miluo City

With China's rapid economic growth, ecological construction and environmental protection become increasingly important. The regenerated resources industry is an effective way to solve problems, such as resources depletion, energy shortage, and pollution, and it also has strategic importance for the construction of a resource-conserving and environment-friendly society. The regenerated resources industry has been established in Miluo for long time, which includes a recycling system, a processing and utilization system, and a refuse decontamination system. An industrial cluster is in its early stage of development. In order to solve current problems, such as short industrial chain, low processing rate, and low added value, the industrial cluster should be dynamically upgraded by means of technology innovation, chain nucleus creation, and chain extension. We think the industrial cluster of regenerated resources will become a local brand for Miluo, from which other regions or cities will gain valuable experiences and inspirations.     

废水产氢产酸/同型产乙酸耦合产酸条件优化

为了更好地发挥产氢产酸/同型产乙酸耦合系统在废水厌氧发酵生产乙酸方面的优势,有必要寻找一种简单有效的方法以获得该系统产酸的优化条件.利用经过加热处理并活化的厌氧污泥作种泥,以模拟废水中的葡萄糖为底物,针对发酵时间、底物浓度、种泥浓度、初始pH进行4因素10水平均匀设计实验,得到了乙酸生产指标与产酸条件之间关系的回归方程;也得到了以高乙酸产量为主要目标导向同时兼顾高乙酸产率和高乙酸生产强度目标的优化条件;优化条件实验乙酸浓度比均匀设计中最高乙酸浓度提高20%左右.研究表明,将均匀设计应用于废水产氢产酸/同型产乙酸耦合产酸条件优化,可以避免盲目性,迅速获得满意结果.     

Technological Progress, Structural Change and China＇s Energy Efficiency

China has witnessed rapid economic development since 1978, and during the time, energy production and consumption developed at a tremendous speed as well. Energy efficiency which can be measured by energy consumption per unit of GDP, however, experienced continuous decrease. Theoretically, the change of energy efficiency can be attributed to industry structural change and technological change. In order to explain the transformation of Chinese energy efficiency, we adopt logarithmic mean Divisia index techniques to decompose changes in energy intensity in the period of 1994-2005. We find that technological change is the dominant contributor in the decline of energy intensity, but the contribution has declined since 2001. The change in industry structure has decreased the energy intensity before 1998, but raised the intensity after 1998. Decomposed technological effects for all sectors indicate that technological progresses in high energy consuming industries such as raw chemical materials and chemical products, smelting and pressing of ferrous metals, manufacture of non-metallic mineral products and household contribute are the principal drivers of China＇s declining energy intensity.     

Global Trend of Low-carbon Economy and China's Responses

Based on the analysis on the global economic crisis,climate change crisis and their mutual underlying reasons,the authors believe that low-carbon economy has become an inevitable choice to break through the dual crises,coordinate the economic development,and protect the global climate.The global trend of low-carbon economy finds expression in Green Recovery currently,while,in a long run,it will give rise to a new pattern of world competition in politics,economy,technology,trade and finance.The impact of the...     

Anthropogenic impacts on suspended sediment load in the Upper Yangtze river

Climate change and human disturbance drive catchment erosion and increase riverine sediment load sensitively in small and medium-sized watersheds. This is not always true in large basins, where aggregation and buffering effects have dampen the ability to determine the driving forces of sedimentation. Even though there are significant responses to sedimentation in large river basins, it is difficult to get a precise quantitative assessment of specific drivers. This paper develops a methodology to identify driving forces that change suspended sediment load in the Upper Yangtze river. Annual runoff and sediment load data from 1954 to 2005 at the Yichang gauging station in the Upper Yangtze basin, daily precipitation data from 60 meteorological stations, and survey data on reservoir sediment were collected for the study. Sediment load/rainfall erosivity (S/R), is a new proxy indicator introduced to reflect human activities. Since the mid-1980s, S/R in the Upper Yangtze has dramatically declined from 0.21 to 0.03 (×10¹⁰ t ha h MJ⁻¹ mm⁻¹), indicating that human activity has played a key role in the decline of the suspended sediment load. Before the mid-1980s, a higher average S/R is attributed to large-scale deforestation and land reclamation. A significant sediment decrease occurred from 1959 to 1961 during an extreme drought condition, and an increase in sedimentation in 1998 coincided with an extreme flood event, which was well recorded in the S/R curve. This indicates that the S/R proxy is able to distinguish anthropogenic from climate impacts on suspended sediment load, but is not necessarily indicatory in extreme climate events. In addition, typical drivers of riverine sediment load variation including soil conservation projects, reservoirs construction, and land use/cover change are discussed.     

上海高密度居民区合流制系统雨天溢流水质研究

城市面源污染已成为上海城区河道的主要污染源.为此,研究了上海市合流制排水区域SA雨天溢流的水质特性,并探讨了溢流水质的主要影响因素.结果表明,该区域雨天溢流COD、BOD、SS、NH₃-N、TN、TP事件平均浓度的均值分别为614mg/L、208.5 mg/L、684 mg/L、17.6 mg/L、29.8 mg/L、3.0 mg/L,远高于国外的一些研究结果;分析事件平均浓度的对数正态概率分布表明,BOD的对数正态分布性最好;此外,研究还发现COD和SS溢流浓度和前期晴天数与降雨历时的比值呈现出较高的正相关性.     

Layered sphere-shaped TiO2 capped with gold nanoparticles on structural defects and their catalysis of formaldehyde oxidation

We describe here a one-step method for the synthesis of Au/TiO₂ nanosphere materials, which were formed by layered deposition of multiple anatase TiO₂ nanosheets. The Au nanoparticles were stabilized by structural defects in each TiO₂ nanosheet, including crystal steps and edges, thereby fixing the Au–TiO₂ perimeter interface. Reactant transfer occurred along the gaps between these TiO₂ nanosheet layers and in contact with catalytically active sites at the Au–TiO₂ interface. The doped Au induced the formation of oxygen vacancies in the Au–TiO₂ interface. Such vacancies are essential for generating active oxygen species (*O⁻) on the TiO₂ surface and Ti^3 + ions in bulk TiO₂. These ions can then form Ti^3 +–O⁻–Ti^4 + species, which are known to enhance the catalytic activity of formaldehyde (HCHO) oxidation. These studies on structural and oxygen vacancy defects in Au/TiO₂ samples provide a theoretical foundation for the catalytic mechanism of HCHO oxidation on oxide-supported Au materials.