土地承载力研究范式的变迁、分化及其综论

基于Kuhn范式理论,将现有土地承载力研究成果显化、梳理为4种主要研究范式,即基于限制因子的研究范式、基于多因素综合的研究范式、基于参照区的研究范式、基于生态足迹的研究范式。以范式应用的时代背景、空间尺度为着眼点,对各类范式进行综合比较,结果显示：基于限制因子的土地承载力研究范式起源最早、发展最为成熟,基于多因素综合、基于参照区、基于生态足迹的3种研究范式,均是以前者为基础,按照不同的方向分化而成;范式分化的原因在于时空条件的变化所引致的亟需解释、解决的现实问题的变化。范式本身并无优劣之分,但有其独特的适应性：基于限制因子、基于生态足迹的两种研究范式适用于全球及国家等大尺度土地承载力问题,且发展较为成熟,其成果具有较强的理论和实践指导意义;基于多因素综合及基于参照区的两种研究范式适用于市县等中小尺度,但其研究较为薄弱,所得的承载力分值、承载力相对值对区域土地管理实践的指导价值有限。当前,市县等中小尺度土地承载力研究亟需加强,其指导实践的有效性与可操作性亟待大幅度提高。     

生物基聚合物PHBV和PLA复合材料在不同介质中的生物降解及其影响因素

传统工艺的塑料生产不仅依赖石油资源的持续开发利用,同时给环境造成了前所未有的压力,近年来生物基聚合物（聚（3-羟基-3-戊酸酯）-PHBV,聚乳酸-PLA）日渐成为传统石油基塑料的替代产品.本文采用呼吸测试手段,旨在揭示均质复合材料在不同环境介质（土壤、熟化堆肥、水体）条件下及有机添加剂（木质素）,无机添加剂（蒙脱石）和天然有机物链增长剂（Joncryl）作用下的生物降解特征.结果表明：当链增长剂Joncryl添加量为5%时,对所有介质PHBV和PLA复合材料产生显著抑制作用.Joncryl添加量为0.2%时,未对所测样品的生物降解行为产生干扰作用.在熟化堆肥介质中,PLA复合材料比PHBV基质混合物的生物降解速率明显降低.有机木质纤维添加剂（榛子壳粉末）单独在聚合物中添加或者和链增长剂Joncryl以及非有机添加剂（Dellite72T）共同作用下都可促进PLA聚合物中各组分的相容连接性.实验结果表明,新型添加剂在不同介质中以二元或三元添加的方式对生物降解过程产生重要影响,该研究将为新型材料使用后的生物降解效应提供理论依据.     

Potential of secondary aerosol formation from Chinese gasoline engine exhaust

Light-duty gasoline vehicles have drawn public attention in China due to their significant primary emissions of particulate matter and volatile organic compounds(VOCs). However,little information on secondary aerosol formation from exhaust for Chinese vehicles and fuel conditions is available. In this study, chamber experiments were conducted to quantify the potential of secondary aerosol formation from the exhaust of a port fuel injection gasoline engine. The engine and fuel used are common in the Chinese market, and the fuel satisfies the China V gasoline fuel standard. Substantial secondary aerosol formation was observed during a 4–5 hr simulation, which was estimated to represent more than 10 days of equivalent atmospheric photo-oxidation in Beijing. As a consequence, the extreme case secondary organic aerosol(SOA) production was 426 ± 85 mg/kg-fuel, with high levels of precursors and OH exposure. The low hygroscopicity of the aerosols formed inside the chamber suggests that SOA was the dominant chemical composition. Fourteen percent of SOA measured in the chamber experiments could be explained through the oxidation of speciated single-ring aromatics. Unspeciated precursors, such as intermediate-volatility organic compounds and semi-volatile organic compounds, might be significant for SOA formation from gasoline VOCs. We concluded that reductions of emissions of aerosol precursor gases from vehicles are essential to mediate pollution in China.     

The effects of autophagy on vascular endothelial cells induced by airborne PM2.5

The purpose of this study was to examine the direct toxicity of PM2.5 collected from Beijing on human umbilical vein endothelial cells(HUVEC). A Cell Counting Kit 8(CCK8) assay demonstrated that PM2.5 exposure decreased the proliferation of HUVECs in a dosedependent manner. We also found that PM2.5 exposure induced autophagy in HUVECs, as evidenced by:(1) an increased number of double-membrane vesicles;(2) enhanced conversion and punctuation of the microtubule-associated protein light chain 3(LC3); and(3) decreased levels of the selective autophagy substrate p62 in a time-dependent manner.Furthermore, promoting autophagy in PM2.5-exposed HUVECs with rapamycin increased the cell survival rate, whereas inhibiting autophagy via 3-methyladenine significantly decreased cell survival. These results demonstrate that PM2.5 exposure can induce cytotoxicity and autophagy in HUVECs and that autophagy play a protective role against PM2.5-induced cytotoxicity. The findings of the present study imply a direct toxic effect of PM2.5 on HUVECs and provide novel insight into the mechanism of cardiovascular diseases caused by PM2.5 exposure.     

Effects of Na+ on Cu/SAPO-34 for ammonia selective catalytic reduction

Copper-exchanged chabazite (Cu/CHA) catalysts have been found to be affected by alkali metal and alkaline earth ions. However, the effects of Na⁺ ions on Cu/SAPO-34 for ammonia selective catalytic reduction (NH₃-SCR) are still unclear. In order to investigate the mechanism, five samples with various Na contents were synthesized and characterized. It was observed that the introduced Na⁺ ion-exchanges with H⁺ and Cu^2 + of Cu/SAPO-34. The exchange of H⁺ is easier than that of isolated Cu^2 +. The exchanged Cu^2 + ions aggregate and form “CuAl₂O₄-like” species. The NH₃-SCR activity of Cu/SAPO-34 decreases with increasing Na content, and the loss of isolated Cu^2 + and acid sites is responsible for the activity loss.     

房屋建筑工程施工现场环境保护以及节能降耗控制措施研究

房屋建筑施工阶段是建筑工程中最为重要的阶段,也是资源消耗和环境污染的集中阶段。房屋建筑施工造成的环境污染主要来源于:施工中的固体垃圾、液体垃圾和气体垃圾,且在施工现场,相关人员节能降耗意识薄弱,对于施工中存在的资源浪费现象经常会忽视。基于此,给出了如下措施:加强施工过程的监控,合理排放施工现场的污水和固体废弃物;提高水的利用率,并在施工过程中,通过节水工艺对路面进行喷洒;合理排放施工过程产生的污水,对含有化学品、油漆的建筑材料要实施防渗漏措施;设置封闭式垃圾容器,利用袋装化形式将施工垃圾带出施工现场;倡导绿色施工。     

感潮河段污水处理厂尾水对受纳水体的水质影响研究

感潮河段污水处理厂尾水排放对受纳水体产生一定影响,利用二维水动力水质耦合模型,以COD、NH3-N、TP为污染因子,分别以正常排放和事故排放两种条件,模拟江苏南部某污水处理厂尾水排放,分析江段大小潮时污染物浓度增量情况。实验结果表明:正常排放,尾水对排放口附近江段保护区水质影响小;事故排放,尾水对保护区水质无影响,但长江水体影响范围增大,沿岸污染物浓度增高,且小潮周期影响作用强于大潮周期,污水处理厂应加强管理,尤其在小潮时应避免污水事故排放。     

交通拥堵环境下的隔声、降噪措施改进与研究

噪声污染有局部性特点,现阶段城市内噪声污染的根源主要集中于汽车噪音,在交通拥堵的环境下,对声音进行隔断降噪十分必要。不同环境下的噪声评价方法各有不同,但归根结底,任何噪声污染事件由噪声源、传声途径和接收者三个主要部分组成。在交通拥堵环境下对噪声源和传声途径两个角度对声音进行降噪是当前隔声降噪的主措施。因此,提出对车辆的组装结构和行车路线进行改进、在汽车制造过程中采用具有良好隔声、吸声效果的材料进行降噪。并结合实例进行调查分析,针对日趋严重的城市交通拥堵导致的噪声污染问题,对噪声进行了预测分析,并针对实际情况提出一种新的隔声屏障降噪模式并进行仿真实验分析。     

环境污染防治在建筑工程管理施工中的作用分析与研究

建筑活动是破坏环境资源、污染环境的主要活动之一,如何有效达到施工环境污染防治的目标已经逐渐成为社会关注的焦点话题。为有效防治施工环境污染,文中首先对典型施工环境污染的主要来源进行分析,然后提出施工环境污染防治目标的动态控制流程,并从设置动态控制目标、重视主动控制、多方面釆取有效措施方面对目标的动态控制进行分析。通过对施工环境目标的动态控制分析,使动态控制原理在项目环境管理领域有效运用,降低了建筑施工对环境的污染。     

等离子体处理的时效性对芳Ⅲ/双马复合材料耐湿热性能的影响

目的考察等离子体处理前后及其时效性对芳Ⅲ/双马复合材料弯曲强度、界面性能及耐湿热性能的影响。方法用低温射频耦合等离子体处理芳纶纤维表面,分别将未处理的、等离子体刚处理过的和等离子体处理后在空气中放置三天后的纤维通过溶液预浸渍工艺制备芳Ⅲ/双马复合材料预浸料,再经过高温模压成形技术制备芳Ⅲ/双马复合材料单向板。采用万能材料试验机对水煮前后复合材料的弯曲强度和层间剪切强度进行测试,利用扫描电子显微镜对复合材料层间剪切破坏形貌进行观察。结果等离子体处理后,复合材料的吸水率由未处理时的0.51%下降到0.33%,复合材料层间剪切强度由49.4 MPa提高到62.9 MPa。等离子体处理时效后复合材料的吸水率增加到0.69%,复合材料的层间剪切强度下降到56.0 MPa。结论等离子体处理提高了复合材料界面性能,但等离子体处理的时效后,复合材料的界面性能及其耐湿热性能有所下降。等离子体处理及时效性对复合材料的弯曲强度和耐湿热性能变化不大。