曝气生物滤池的短程硝化特性

通过控制进水pH值实现曝气生物滤池的短程硝化。工艺运行结果表明,对于进水pH值为8.22~8.57,NH4+-N平均容积负荷为0.5 kg/(m3.d),水温为17.5~20.2℃,曝气生物滤池溶解氧质量浓度平均为4.5 mg/L的条件下能够同步实现95%的NH4+-N去除率和80%的NO2--N积累率。通过分析FA和FNA沿滤池高度的变化特征,发现滤池底部(0~5 cm)区域短程硝化反应主要由FA控制,中部(5~15 cm)区域是由FA和FNA共同掌控;而上部区域(15~50 cm)则是由FNA控制,FNA沿滤池高度的快速增加是确保工艺实现稳定亚硝酸盐积累的重要原因。     

徐州市水资源承载力量化评价与研究

针对徐州市水资源系统构成、供需情况及存在问题,利用灰色关联度分析法与向量模法,构建了徐州市水资源承载力评价指标体系,并对其进行了量化评价.通过对量化评价结果的分析,找到了影响徐州市水资源承载力的主要因素,并提出了提高徐州市水资源承载力的对策与措施.     

接触氧化工艺处理农村分散污水中试研究

采用接触氧化反应器处理农村分散污水,通过实验确定了适宜的工艺参数,研究表明采用接触氧化反应器处理农村污水,在反应器内溶解氧(DO)质量浓度维持在2.0～4.0 mg/L,水力负荷为3.53 m3/(m2·d)的运行条件下,对COD,NH4+-N及 IN去除率分别达到76.10％,68.12％,60.50％,出水可稳定达到GB 18918-2002《城镇污水处理厂污染物排放标准》一级B标准.     

论经济欠发达地区如何建设生态工业园区——以千里山工业园区为例

资源和环境问题已成为各界关注的焦点,工业园区向现代生态工业因区建设转变是新形势生态文明下的必然要求。文章以内蒙古乌海市海勃湾区千里山工业园区为例,阐述了该工业园区建立生态型工业园区的可行性。     

钢铁企业固体废弃物资源化利用浅析

固体废物做到资源化即通过综合利用,使有利用价值的固体废物变废为宝,实现资源的再循环利用,是固体废物污染控制一直努力方向。钢铁联合企业生产过程中产生的固体废弃物量大、面广,如对其进行资源化利用不仅可获得好的效益,同时也解决了环保难题。通过借鉴国内外钢铁企业固体废弃物资源化利用成功技术,使我们在开展环境影响评价工作中对钢铁企业固废的资源化利用提出一些切实可行的控制措施。     

化工建设规划生态环境影响评价研究

规划环境影响评价是以可持续发展的思想为出发点,通过调整规划布局或规模从规划源头预防环境污染和生态破坏.文章探讨了化工建设规划的生态环境影响评价理论和方法学体系,并以武汉化工新城为例,对该理论方法体系进行探讨.     

一起110kV电容式电压互感器缺陷分析

电容式电压互感器(capacitor voltage transformer,CVT),是变电站的重要设备,主要用来测量线路电压,为二次设备提供电源等。通过对一起某变电站 110kV电容式电压互感器异常发热缺陷分析,结合电气试验、油色谱检测等,对缺陷部位和原因进行诊断,并提出了相应的防范措施。     

Effects of metal and acidic sites on the reaction by-products of butyl acetate oxidation over palladium-based catalysts

Catalytic oxidation is widely used in pollution control technology to remove volatile organic compounds. In this study, Pd/ZSM-5 catalysts with different Pd contents and acidic sites were prepared via the impregnation method. All the catalysts were characterized by means of N2 adsorption- desorption, X-ray fluorescence （XRF）, HE temperature programmed reduction （H2-TPR）, and NH3 temperature programmed desorption （NH3-TPD）. Their catalytic performance was investigated in the oxidation of butyl acetate experiments. The by-products of the reaction were collected in thermal desorption tubes and identified by gas chromatography/mass spectrometry. It was found that the increase of Pd content slightly changed the catalytic activity of butyl acetate oxidation according to the yield of CO2 achieved at 90%, but decreased the cracking by-products, whereas the enhancement of strong acidity over Pd-based catalysts enriched the by-product species. The butyl acetate oxidation process involves a series of reaction steps including protolysis, dehydrogenation, dehydration, cracking, and isomerization. Generally, butyl acetate was cracked to acetic acid and 2- methylpropene and the latter was an intermediate of the other by-products, and the oxidation routes of typical by-products were proposed. Trace amounts of 3-methylpentane, hexane, 2-methylpentane, pentane, and 2-methylbutane originated from iso4merization and protolysis reactions.     

Experimental study on filtration and continuous regeneration of a particulate filter system for heavy-duty diesel engines

This study investigated the filtration and continuous regeneration of a particulate filter system on an engine test bench, consisting of a diesel oxidation catalyst（DOC） and a catalyzed diesel particulate filter（CDPF）. Both the DOC and the CDPF led to a high conversion of NO to NO2 for continuous regeneration. The filtration efficiency on solid particle number（SPN） was close to100%. The post-CDPF particles were mainly in accumulation mode. The downstream SPN was sensitively influenced by the variation of the soot loading. This phenomenon provides a method for determining the balance point temperature by measuring the trend of SPN concentration.     

Arbuscular mycorrhizal fungal phylogenetic groups differ in affecting host plants along heavy metal levels

Arbuscular mycorrhizal fungi（AMF） are important components of soil microbial communities,and play important role in plant growth. However, the effects of AMF phylogenetic groups（Glomeraceae and non-Glomeraceae） on host plant under various heavy metal levels are not clear. Here we conducted a meta-analysis to compare symbiotic relationship between AMF phylogenetic groups（Glomeraceae and non-Glomeraceae） and host plant functional groups（herbs vs. trees, and non-legumes vs. legumes） at three heavy metal levels. In the meta-analysis, we calculate the effect size（ln（RR）） by taking the natural logarithm of the response ratio of inoculated to non-inoculated shoot biomass from each study. We found that the effect size of Glomeraceae increased, but the effect size of non-Glomeraceae decreased under high level of heavy metal compared to low level. According to the effect size, both Glomeraceae and non-Glomeraceae promoted host plant growth, but had different effects under various heavy metal levels. Glomeraceae provided more benefit to host plants than non-Glomeraceae did under heavy metal condition, while non-Glomeraceae provided more benefit to host plants than Glomeraceae did under no heavy metal. AMF phylogenetic groups also differed in promoting plant functional groups under various heavy metal levels.Interacting with Glomeraceae, herbs and legumes grew better than trees and non-legumes did under high heavy metal level, while trees and legumes grew better than herbs and non-legumes did under medium heavy metal level. Interacting with non-Glomeraceae, herbs and legumes grew better than trees and non-legumes did under no heavy metal. We suggested that the combination of legume with Glomeraceae could be a useful way in the remediation of heavy metal polluted environment.