Evaluation of compost blankets for erosion control from disturbed lands

Soil erosion due to water and wind results in the loss of valuable top soil and causes land degradation and environmental quality problems. Site specific best management practices (BMP) are needed to curb erosion and sediment control and in turn, increase productivity of lands and sustain environmental quality. The aim of this study was to investigate the effectiveness of three different types of biodegradable erosion control blankets- fine compost, mulch, and 50-50 mixture of compost and mulch, for soil erosion control under field and laboratory-scale experiments. Quantitative analysis was conducted by comparing the sediment load in the runoff collected from sloped and tilled plots in the field and in the laboratory with the erosion control blankets. The field plots had an average slope of 3.5% and experiments were conducted under natural rainfall conditions, while the laboratory experiments were conducted at 4, 8 and 16% slopes under simulated rainfall conditions. Results obtained from the field experiments indicated that the 50-50 mixture of compost and mulch provides the best erosion control measures as compared to using either the compost or the mulch blanket alone. Laboratory results under simulated rains indicated that both mulch cover and the 50-50 mixture of mulch and compost cover provided better erosion control measures compared to using the compost alone. Although these results indicate that the 50-50 mixtures and the mulch in laboratory experiments are the best measures among the three erosion control blankets, all three types of blankets provide very effective erosion control measures from bare-soil surface. Results of this study can be used in controlling erosion and sediment from disturbed lands with compost mulch application. Testing different mixture ratios and types of mulch and composts, and their efficiencies in retaining various soil nutrients may provide more quantitative data for developing erosion control plans.     

The 2011 flood event in the Mekong Delta: preparedness,response, damage and recovery of private households and small businesses

Floods frequently cause substantial economic and human losses, particularly in developing countries. For the development of sound flood risk management schemes that reduce flood consequences, detailed insights into the different components of the flood risk management cycle, such as preparedness, response, flood impact analyses and recovery, are needed. However, such detailed insights are often lacking: commonly, only (aggregated) data on direct flood damage are available. Other damage categories such as losses owing to the disruption of production processes are usually not considered, resulting in incomplete risk assessments and possibly inappropriate recommendations for risk management. In this paper, data from 858 face‐to‐face interviews among flood‐prone households and small businesses in Can Tho city in the Vietnamese Mekong Delta are presented to gain better insights into the damage caused by the 2011 flood event and its management by households and businesses.     

Spatial-econometric analysis of attraction and repulsion of private conservation by public reserves

It is difficult for public agencies to make optimal reserve-site selections without knowing how new public reserves might influence the configuration of private conservation. Private land trusts protect much land in the USA, but little is known about how private groups respond to conservation decisions made by other conservation agents. To fill that gap, we analyze township-level spatial data on conservation in California, Illinois, and Massachusetts to explore relationships between the location of private and public conservation land. Using linear spatial-econometric models and Bayesian spatial probit models, we find evidence that private-protected acres are clustered together in space. In California, it appears that private land conservation is attracted towards places where the government has reserves. In Illinois and Massachusetts, however, it appears that private conservation shifts away from townships with government reserves due to a mixture of spatial repulsion and simple acreage displacement.     

Practical Minimum Energy Requirements for Chemical Product Manufacturing: A Management Decision Tool for Achieving Sustainable Products

Practical Minimum Energy requirements comprise a management decision tool designed to assist companies in adopting strategies for more sustainable products through improved energy efficiency. This tool allows managers to gauge the potential for reducing the energy intensity of chemical processes as well as the environmental impacts associated with energy consumption, such as greenhouse gas emissions. © 2001 John Wiley & Sons, Inc.     

Variation of MCPA, metribuzine, methyltriazine-amine and glyphosate degradation, sorption, mineralization and leaching in different soil horizons

Pesticide mineralization and sorption were determined in 75 soil samples from 15 individually drilled holes through the vadose zone along a 28 km long transect of the Danish outwash plain. Mineralization of the phenoxyacetic acid herbicide MCPA was high both in topsoils and in most subsoils, while metribuzine and methyltriazine-amine was always low. Organic matter and soil pH was shown to be responsible for sorption of MCPA and metribuzine in the topsoils. The sorption of methyltriazine-amine in topsoil was positively correlated with clay and negatively correlated with the pH of the soil. Sorption of glyphosate was tested also high in the subsoils. One-dimensional MACRO modeling of the concentration of MCPA, metribuzine and methyltriazine-amine at 2 m depth calculated that the average concentration of MCPA and methyltriazine-amine in the groundwater was below the administrative limit of 0.1 μg/l in all tested profiles while metribuzine always exceeded the 0.1 μg/l threshold value.     

Aerobic and anaerobic transformations of sulfide in a sewer system--field study and model simulations.

The formation and fate of sulfide in a force main and a downstream-located gravity sewer were investigated in an extensive field study. Sulfide formation in the force main was significant. However, during 14 minutes of transport in the gravity sewer, the sulfide concentration decreased 30%, on average. An application of a conceptual sewer process model for simulating the formation and fate of sulfide was demonstrated. Overall, the model predicted that approximately 90% of the decrease of the sulfide concentration in the gravity sewer was the result of sulfide oxidation and that only a small fraction entered the sewer atmosphere, causing odor and corrosion. Even so, the model predicted concrete corrosion rates of up to 1.2 mm/y in the gravity sewer section.     

Annual migrations,diving behavior,and thermal biology of Atlantic bluefin tuna, <Emphasis Type="Italic">Thunnus thynnus</Emphasis>, on their Gulf of Mexico breeding grounds

Electronic tags were used to examine the biology of Atlantic bluefin tuna (Thunnus thynnus L.) on their breeding grounds in the Gulf of Mexico (GOM). The hypothesis that movement patterns, diving behavior, and thermal biology change during different stages of the breeding migration was tested. Mature Atlantic bluefin tuna tagged in the western Atlantic and the GOM, were on their breeding grounds from February to June for an average of 39 ± 11 days. The bluefin tuna experienced significantly warmer mean sea surface temperatures (SSTs) within the GOM (26.4 ± 1.6°C) than outside the GOM (20.2 ± 1.9°C). As the bluefin tuna entered and exited the GOM, the fish dove to daily maximum depths of 568 ± 50 and 580 ± 144 m, respectively, and exhibited directed movement paths to and from the localized breeding areas. During the putative breeding phase, the bluefin tuna had significantly shallower daily maximum depths (203 ± 76 m), and exhibited shallow oscillatory dives during the night. The movement paths of the bluefin tuna during the breeding phase were significantly more residential and sinuous. The heat transfer coefficients (K) were calculated for a bluefin tuna in the GOM using the recorded ambient and body temperatures. The K for this fish increased rapidly at the high ambient temperatures encountered in the GOM, and was significantly higher at night in the breeding phase when the fish was exhibiting shallow oscillatory dives. This suggests that the fish were behaviorally and physiologically thermoregulating in the Gulf of Mexico. This study demonstrates that the movement patterns, diving behavior, and thermal biology of Atlantic bluefin tuna change significantly at different stages of the breeding migration and can be used to define spawning location and timing. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Preparation of high resolution chromosomes from amniotic fluid cells

A relatively simple method of obtaining high resolution chromosomes from amniotic fluid cells is described. The elongated chromosomes are achieved by adding ethidium bromide (5μg/ml) to the culture 4 1/2 hours before harvesting and the high resolution banding can be produced by usual banding procedures.