Quantitative measurement of streptomycetes using real-time PCR

A quantitative real-time PCR method was developed and used for determination of streptomycetes in indoor dust samples of five homes collected during three years. The specificity of the method was tested with 14 Streptomyces and ten non-streptomycetous species, revealing a high specificity for mesophilic streptomycetes. Thermophilic species and S. albus were not efficiently detected. The method gave reproducible results in replicate analyses of the same dust DNA as well as of duplicate DNA isolations. The amount of streptomycetes in house dust was lowest in winter, followed by summer, and highest in spring and fall. The greatest variation in Streptomyces-concentrations was observed in the spring and fall samples.     

Effects of moisture damage and renovation on microbial conditions and pupils' health in two schools--a longitudinal analysis of five years

Airborne microbes and pupils' symptoms were monitored in a moisture-damaged (index) school and a reference school for five consecutive years. These surveys were carried out in two separate years before the renovation of the index school, during the renovation, and one and two years after the renovation. Microbial concentrations were higher in the index school than those in the reference school before and during renovation, but afterwards, the levels decreased to the level of the reference school. The effect of remediation was seen as an altered mycobiota in the index school. Year-to-year variation of microbial concentrations, probably due to climatic factors, caused a peak in both schools but their difference remained. Several symptoms were more prevalent in the moisture-damaged school than in the reference school, but the differences disappeared during the renovations. These results emphasize the importance of using a reference building in assessing the microbial conditions of a moisture damaged building. Furthermore, microbial concentrations reflected well the technical condition of the construction, but the reported symptoms of the occupants did not strictly follow the timely fluctuation in microbial conditions.     

From mother to child: investigation of prenatal and postnatal exposure to persistent bioaccumulating toxicants using breast milk and placenta biomonitoring

The exposure levels of placenta and paired breast milk samples to selected organochlorine compounds and pesticides from Danish and Finnish samples have been investigated. p,p'-DDE is the dominant pollutant, beta-HCH, hexachlorobenzene, endosulfan-I, dieldrin, oxychlordane, cis-heptachlor epoxide and p,p'-DDT being the other major constituents. Their concentrations are linearly correlated between milk and placenta in similar patterns for Danish and Finnish samples. Milk samples have higher levels of these pollutants than placenta on lipid base. However, the apparently not correlated compounds, such as alpha-HCH, pentachlorobenzene, pentachloroanisole and methoxychlor, are generally accumulated more in placenta, which may suggest a tissue specific metabolic activity. Thus, depending on the compound of interest, biomonitoring may be done in placenta only or in both matrices.     

Partitioning of selected environmental pollutants into organic matter as determined by solid-phase microextraction

Partitioning/sorption of selected environmental pollutants (PCBs, organochlorine insecticides, triazine and amide herbicides) into dissolved humic acids (HA), soil and mineral substances was evaluated by measuring their free concentrations by solid-phase microextraction (SPME). Compounds were chosen to cover a wide range of logK(ow) (2.2-7.6). Two different types of partitioning behaviour for dissolved HA were observed. Compounds with logK(ow)>5 partitioned almost instantly into HA fraction and the remaining free fraction remained rather constant. LogK(HA) and logK(DOC) were calculated and found to be similar for commercial HA, HA standard and isolated HA. The behaviour of these compounds in soil suspension was similar, but strong sorption on CaCO3 and Florisil was also noticed. For compounds with logK(ow)<5, we have not noticed significant changes in free concentrations in HA solutions over time. In soil suspension, however, some sorption/partitioning was observed over time for some compounds, but it was matching the sorption on CaCO3 and Florisil.     

CCA-treated wood disposed in landfills and life-cycle trade-offs with waste-to-energy and MSW landfill disposal

Chromated copper arsenate (CCA)-treated wood is a preservative treated wood construction product that grew in use in the 1970s for both residential and industrial applications. Although some countries have banned the use of the product for some applications, others have not, and the product continues to enter the waste stream from construction, demolition and remodeling projects. CCA-treated wood as a solid waste is managed in various ways throughout the world. In the US, CCA-treated wood is disposed primarily within landfills; however some of the wood is combusted in waste-to-energy (WTE) facilities. In other countries, the predominant disposal option for wood, sometimes including CCA-treated wood, is combustion for the production of energy. This paper presents an estimate of the quantity of CCA-treated wood entering the disposal stream in the US, as well as an examination of the trade-offs between landfilling and WTE combustion of CCA-treated wood through a life-cycle assessment and decision support tool (MSW DST). Based upon production statistics, the estimated life span and the phaseout of CCA-treated wood, recent disposal projections estimate the peak US disposal rate to occur in 2008, at 9.7 million m(3). CCA-treated wood, when disposed with construction and demolition (C&D) debris and municipal solid waste (MSW), has been found to increase arsenic and chromium concentrations in leachate. For this reason, and because MSW landfills are lined, MSW landfills have been recommended as a preferred disposal option over unlined C&D debris landfills. Between landfilling and WTE for the same mass of CCA-treated wood, WTE is more expensive (nearly twice the cost), but when operated in accordance with US Environmental Protection Agency (US EPA) regulations, it produces energy and does not emit fossil carbon emissions. If the wood is managed via WTE, less landfill area is required, which could be an influential trade-off in some countries. Although metals are concentrated in the ash in the WTE scenario, the MSW landfill scenario releases a greater amount of arsenic from leachate in a more dilute form. The WTE scenario releases more chromium from the ash on an annual basis. The WTE facility and subsequent ash disposal greatly concentrates the chromium, often oxidizing it to the more toxic and mobile Cr(VI) form. Elevated arsenic and chromium concentrations in the ash leachate may increase leachate management costs.     

Surface ozone and carbon monoxide levels observed at Oki, Japan: regional air pollution trends in East Asia

Simultaneous ground-based measurements of ozone and carbon monoxide were performed at Oki, Japan, from January 2001 to September 2002 in order to investigate the O(3) and CO characteristics and their distributions. The observations revealed that O(3) and CO concentrations were maximum in springtime and minimum in the summer. The monthly averaged concentrations of O(3) and CO were 60 and 234 ppb in spring and 23 and 106 ppb in summer, respectively. Based on direction, 5-day isentropic backward trajectory analysis was carried out to determine the transport path of air masses, preceding their arrival at Oki. Comparison between classified results from present work and results from the year 1994-1996 was carried out. The O(3) and CO concentration results of classified air masses in our analysis show similar concentration trends to previous findings; highest in the WNW/W, lowest in N/NE and medium levels in NW. Moreover, O(3) levels are higher and CO levels are lower in the present study in all categories.     

Benthic foraminiferal distribution on the southeastern Brazilian shelf and upper slope

Foraminiferal data were obtained from 66 samples of box cores on the southeastern Brazilian upper margin (between 23.8°–25.9°S and 42.8°–46.13°W) to evaluate the benthic foraminiferal fauna distribution and its relation to some selected abiotic parameters. We focused on areas with different primary production regimes on the southern Brazilian margin, which is generally considered as an oligotrophic region. The total density (D), richness (R), mean diversity ([`(H^￠ )] \overline{{H^{\prime } }} ), average living depth (ALD _X ) and percentages of specimens of different microhabitats (epifauna, shallow infauna, intermediate infauna and deep infauna) were analyzed. The dominant species identified were Uvigerina spp., Globocassidulina subglobosa, Bulimina marginata, Adercotryma wrighti, Islandiella norcrossi, Rhizammina spp. and Brizalina sp.. We also established a set of mathematical functions for analyzing the vertical foraminiferal distribution patterns, providing a quantitative tool that allows correlating the microfaunal density distributions with abiotic factors. In general, the cores that fit with pure exponential decaying functions were related to the oligotrophic conditions prevalent on the Brazilian margin and to the flow of the Brazilian Current (BC). Different foraminiferal responses were identified in cores located in higher productivity zones, such as the northern and the southern region of the study area, where high percentages of infauna were encountered in these cores, and the functions used to fit these profiles differ appreciably from a pure exponential function, as a response of the significant living fauna in deeper layers of the sediment. One of the main factors supporting the different foraminiferal assemblage responses may be related to the differences in primary productivity of the water column and, consequently, in the estimated carbon flux to the sea floor. Nevertheless, also bottom water velocities, substrate type and water depth need to be considered.