Synchronous variation in water chemistry for 80 lakes in Southern Sweden

Variation in water chemistry was studied in 80 lakes in southern Sweden. The lakes had forest dominated catchments. The length of the time series was 14 years. Synchrony was calculated as Pearsons product moment correlation coefficients for all combinations of lakes, i.e. 3160 lake-pairs. The chemical variables studied were non-marine sulphate (SO₄ ^*), non-marine calcium (Ca^*), absorbance and acid neutralising capacity (ANC). Statistically significant synchrony occurred in 93% of all lake-pairs for SO₄ ^*, and between 58 and 67% for absorbance, Ca^* and ANC. In 70% of all lake-pairs, the synchrony was \s>0.71 for SO₄ ^*, which means that more than half of the variation in one lake could be explained by the variation in the other lake. For absorbance, Ca^* and ANC, about 25% of the lake-pairs had a synchrony \s>0.71. The relatively high synchrony for SO₄ ^* occurred during an overall downward trend in SO₄ ^* concentration.The degree of synchrony in our study was at a level comparable to other studies in northern America and England. However, our study included lakes in a much larger area, with distances of up to 500 km between the lakes, while earlier studies were made on small lake districts with lakes located within approximately 50 km. In contrast to these earlier studies, there was no correlation between synchrony and distance, lake characteristics or catchment characteristics. However, when a small subset of 15 lakes in the southeast of Sweden was selected, such relations were found.     

Treatment of Arctic wastewater by chemical coagulation,UV and peracetic acid disinfection

Conventional wastewater treatment is challenging in the Arctic region due to the cold climate and scattered population. Thus, no wastewater treatment plant exists in Greenland, and raw wastewater is discharged directly to nearby waterbodies without treatment. We investigated the efficiency of physicochemical wastewater treatment, in Kangerlussuaq, Greenland. Raw wastewater from Kangerlussuaq was treated by chemical coagulation and UV disinfection. By applying 7.5 mg Al/L polyaluminium chloride (PAX XL100), 73% of turbidity and 28% phosphate was removed from raw wastewater. E. coli and Enterococcus were removed by 4 and 2.5 log, respectively, when UV irradiation of 0.70 kWh/m³ was applied to coagulated wastewater. Furthermore, coagulated raw wastewater in Denmark, which has a chemical quality similar to Greenlandic wastewater, was disinfected by peracetic acid or UV irradiation. Removal of heterotrophic bacteria by applying 6 and 12 mg/L peracetic acid was 2.8 and 3.1 log, respectively. Similarly, removal of heterotrophic bacteria by applying 0.21 and 2.10 kWh/m³ for UV irradiation was 2.1 and greater than 4 log, respectively. Physicochemical treatment of raw wastewater followed by UV irradiation and/or peracetic acid disinfection showed the potential for treatment of arctic wastewater.     

Reconnecting with nature for sustainability

Calls for humanity to ‘reconnect to nature’ have grown increasingly louder from both scholars and civil society. Yet, there is relatively little coherence about what reconnecting to nature means, why it should happen and how it can be achieved. We present a conceptual framework to organise existing literature and direct future research on human–nature connections. Five types of connections to nature are identified: material, experiential, cognitive, emotional, and philosophical. These various types have been presented as causes, consequences, or treatments of social and environmental problems. From this conceptual base, we discuss how reconnecting people with nature can function as a treatment for the global environmental crisis. Adopting a social–ecological systems perspective, we draw upon the emerging concept of ‘leverage points’—places in complex systems to intervene to generate change—and explore examples of how actions to reconnect people with nature can help transform society towards sustainability.     

Chemical-looping with oxygen uncoupling for combustion of solid fuels

Chemical-looping with oxygen uncoupling (CLOU) is a novel method to burn solid fuels in gas-phase oxygen without the need for an energy intensive air separation unit. The carbon dioxide from the combustion is inherently separated from the rest of the flue gases. CLOU is based on chemical-looping combustion (CLC) and involves three steps in two reactors, one air reactor where a metal oxide captures oxygen from the combustion air (step 1), and a fuel reactor where the metal oxide releases oxygen in the gas-phase (step 2) and where this gas-phase oxygen reacts with a fuel (step 3). In other proposed schemes for using chemical-looping combustion of solid fuels there is a need for an intermediate gasification step of the char with steam or carbon dioxide to form reactive gaseous compounds which then react with the oxygen carrier particles. The gasification of char with H₂O and CO₂ is inherently slow, resulting in slow overall rates of reaction. This slow gasification is avoided in the proposed process, since there is no intermediate gasification step needed and the char reacts directly with gas-phase oxygen. The process demands an oxygen carrier which has the ability to react with the oxygen in the combustion air in the air reactor but which decomposes to a reduced metal oxide and gas-phase oxygen in the fuel reactor. Three metal oxide systems with suitable thermodynamic properties have been identified, and a thermal analysis has shown that Mn₂O₃/Mn₃O₄ and CuO/Cu₂O have suitable thermodynamic properties, although Co₃O₄/CoO may also be a possibility. However, the latter system has the disadvantage of an overall endothermic reaction in the fuel reactor. Results from batch laboratory fluidized bed tests with CuO and a gaseous and solid fuel are presented. The reaction rate of petroleum coke is approximately a factor 50 higher using CLOU in comparison to the reaction rate of the same fuel with an iron-based oxygen carrier in normal CLC.     

SIMAIR—Evaluation tool for meeting the EU directive on air pollution limits

Almost all Swedish cities need to determine air pollution levels—especially PM10—close to major streets. SIMAIR is an internet tool that can be used by all Swedish municipalities to assess PM10, NO₂, CO and benzene levels and how they compare to the EU directive. SIMAIR is delivered to the municipalities with all required input data pre-loaded and is meant to be used prior to decisions if and where, monitoring campaigns are required. The system includes a road and vehicle database with emission factors and a model to calculate non-tailpipe PM10 emissions. Regional and urban background contributions are pre-calculated and stored as hourly values on a 1×1 km² grid. The local contribution is calculated by the user, selecting either an open road or a street canyon environment.A comparison between measured and simulated concentrations in four street locations shows that SIMAIR is able to calculate statistics of yearly mean values, 90-percentile and 98-percentile daily mean values and the number of days exceeding the limit value that are well within ±50% that EU requires for model estimates of yearly mean values. In comparison, all values except one are within ±25% which is the quality objective for fixed measurements according to the EU directive.The SIMAIR model system is also able to separate the percentual contribution of the long-range transport from outside the city, the city contribution and the local contribution from the traffic of an individual street.     

Geochemical anomalies from bottom ash in a road construction--comparison of the leaching potential between an ash road and the surroundings

A study was performed between June 2001 and December 2004 with the primary objective of assessing long-term leaching from municipal solid waste incineration bottom ash in a test road construction in relation to a reference road made up of conventional materials and the natural geochemical conditions in the surroundings. The metal leaching from the test road and the reference road was compared with the natural weathering in the regional surroundings for three time scales: 16, 80 and 1000 years. The results show that Cu and Zn cause a geochemical anomaly from the test road compared with the surroundings. The leaching of Cu from the test road is initially high but will decline with time and will in the long term be exceeded by natural weathering. Zn on the other hand has low initial leaching, which will increase with time and will in the long term exceed that of the test road and the surroundings by a factor of 100-300. For the other metals studied, Al, Na, K and Mg, there is only very limited leaching over time and the potential accumulation will not exceed the background values in a 1000 years.     

Hydrogeological relationships of sandy deposits: modeling of two-dimensional unsaturated water and pesticide transport

Prediction of the movement of water and solutes in the vadose zone requires information on the distribution of spatial trends and heterogeneities in porous media. The present study describes different lithofacies origination mainly from glaciofluvial deposits. Among different lithofacies, hydrological relationships were investigated. By means of a two-dimensional hydrological model it was evaluated how the flow of water and leaching of metribuzin (4-amino-6-tert-butyl-4,5-dihydro-3-methylthio-1,2,4-triazin-5-one) was affected. Two selected large outcrop sections consisting of glacial outwash deposits were used in the modeling study. Eleven different lithofacies were distinguished and described in terms of texture distribution, sorting, bedding style, and external boundaries based on excavated soil profiles from 27 locations representing seven predominantly sandy landforms in Denmark. Undisturbed soil columns were sampled from each of the lithofacies and brought to the laboratory to be analyzed. With respect to their soil hydraulic properties, the different lithofacies formed four different hydrofacies having relatively homogeneous, hydrogeological properties. Two large outcrop sections from one of the locations (a gravel pit) located near the terminal moraine of the former Weichsel glacier were used for the HYDRUS-2D modeling. Modeling results revealed that the spatial distribution of sedimentary bodies affected water flow and the leaching of metribuzin.     

Transaction Costs Economics of Irreplaceability: <Emphasis Type="Italic">ex ante</Emphasis> and <Emphasis Type="Italic">ex post</Emphasis> Evaluation of Conservation Networks’ Vulnerability to Environmental Shocks

The theoretical concept, “asset specificity,” is applied to real data in the context of Danish nature conservation network planning in order to produce illustrative examples of an economic measure of the network’s vulnerability to exogenous shocks to the species composition. Three different measures of asset specificity are quantified from the shadow value of eliminating a key species from the individual grid cells. This represents a novel approach and a different interpretation of the term, as it is conventionally used as a qualitative indicator in the transaction cost economics literature. Apart from supplementing existing cost measures with an indicator of risk associated with investments in protected areas, this study demonstrates how the estimation and interpretation of various asset specificity measures for geographical areas may qualify policy makers’ choice of policy instrument in conservation planning. This differs from the more intuitive approach of basing policy instrument choice solely on the rarity of the species in a given area.     

Minderung von Lärmimmissionen des Kfz-Verkehrs

Although the permissible emission limits for new motor vehicles are continuously being reduced year after year, the proportion of citizens in the Federal Republic of Germany who are affected by such traffic noise continues to remain practically constant. Thus, aside from the innovations in motor-vehicle technology, the question must be raised concerning what other possibilities are actually available for achieving a reduction in the emission of traffic noises. In the following, planning possibilities are presented for the traffic routes themselves and for their direct vicinities. An evaluation is also made concerning their efficiency. In addition to the prognostic tools of the guidelines which have been introduced in Germany and Austria, the application of modern research must also be taken into consideration.     

Irrigation of treated wastewater in Braunschweig, Germany: an option to remove pharmaceuticals and musk fragrances

In this study the fate of pharmaceuticals and personal care products which are irrigated on arable land with treated municipal wastewater was investigated. In Braunschweig, Germany, wastewater has been irrigated continuously for more than 45 years. In the winter time only the effluent of the sewage treatment plant (STP) of Braunschweig is used for irrigation, while during summer digested sludge is mixed with the effluent. In the present case study six wells and four lysimeters located in one of the irrigated agricultural fields were monitored with regard to the occurrence of 52 pharmaceuticals and two personal care products (PPCPs; e.g. betablockers, antibiotics, antiphlogistics, carbamazepine, musk fragrances, iodinated contrast media (ICM) and estrogens). No differences in PPCP pollution of the groundwater were found due to irrigation of STP effluents with and without addition of digested sludge, because many polar compounds do not sorb to sludge and lipophilic compounds are not mobile in the soil-aquifer. Most of the selected PPCPs were never detected in any of the lysimeter or groundwater samples, although they were present in the treated wastewater irrigated onto the fields. In the groundwater and lysimeter samples primarily the ICM diatrizoate and iopamidol, the antiepileptic carbamazepine and the antibiotic sulfamethoxazole were detected up to several mugl(-1), while the acidic pharmaceuticals, musk fragrances, estrogens and betablockers were likely sorbed or transformed while passing the top soil layer. Potential estrogenic effects are likely to disappear after irrigation, since the most potent steroid estrogens were not measurable.