Standards, technology and sustainability

There are many examples in the developing countries (DCs) of environmental standards being set at high levels that cannot possibly be met in the prevailing economic conditions. Such standards are counter-productive; responsible operators who would work towards reasonable standards are turned off and evade the standards. This situation arises because the selected standards tend to be copies of existing standards from industrialized countries where most of the work of developing standards has taken place. The standards they copy are the current high standards that are affordable in the West, but are not affordable in the DCs. A similar situation exists with respect to technology. Designs that work well in the West tend to be copied but do not function well in the DCs because the level of expertise needed to ensure proper performance does not exist, and cannot be recruited and retained at the low wage levels that most authorities are able to pay. The remedy in both cases is to ensure that standards are appropriate and that the constructed facilities will be appropriate and sustainable. They can be sustainable only if adequate funds are assured for a sound program of operation and maintenance. With the ever increasing competition for the use of scarce water resources, all control agencies have a duty to maximize the use of the water they are allocated. For urban water supply systems this means ensuring tight control of UFW. Privatization of UFW control may offer significant benefits for the DCs and merits serious consideration.     

DEVELOPMENT OF DESIGN STORM HYETOGRAPHS FOR CINCINNATI,OHIO1

ABSTRACT A synthetic storm rainfall hyetograph for a one-year design frequency is derived from the one-year intensity-duration curve developed for Cincinnati, Ohio. Detailed rainfall data for a three-year period were collected from three raingages triangulating the Bloody Run Sewer Watershed, an urban drainage areas of 2380 acres'in Cincinnati, Ohio. The advancement of the synthetic storm pattern is obtained from an analysis of the antecedent precipitation immediately preceding the maximum period of three selected durations. Rains which produced excessive runoff at least for some duration were considered only. The same approach can be used for other design frequencies. The purpose of this study is to provide synthetic storm hyetographs to be used as input in deterministic mathematical models simulating urban storm water runoff for the design, analysis and possible surcharge prediction of sewer systems.     

Viewer preference for spatial arrangement of park trees: An application of video-imaging technology

Research on perception of parks and recreation settings has examined several important tree attributes that influence people's visual preferences. This research, however, has usually not considered the spatial arrangement of the trees, partly because of the lack of adequate methods for representing tree arrangements with systematically manipulated geometries. In the study reported here, computer video-imaging techniques were used to construct simulated landscape scenes that varied on specific dimensions of the spatial configuration of trees. The simulations were rated for visual preference by three respondent groups: a university class, a bicycle club, and a women's civic group. Preference ratings were significantly influenced by the number of trees in the scene, by the number of clumps into which trees were grouped, and by the diameter of the clumps. The video-imaging technology implemented in this study offers important methodological advantages for the design of carefully controlled experiments to study human response to variation in landscape treatments.     

Food preferences and mound-building behaviour of the mound-building mice Mus spicilegus

Optimal foraging strategies and food choice are influenced by various factors, e.g. availability, size and caloric content of the food type and predation risk. However, food choice criteria may change when food is not eaten immediately but has to be carried to a storage site for later use. For example, handling time in terms of harvesting and transport time should be optimized, particularly when the risk of predation is high. Thus, it is not clear whether food selected by hoarding animals reflects their food preference due to intrinsic features of the food type, e.g. size, caloric or lipid content, or whether the food type selected is a compromise that also considers the handling time required for harvesting and transport. We investigate this question in relation to food hoarding behaviour in mound-building mice. In autumn, mound-building mice Mus spicilegus collect seeds and other plant material and cover it with soil. Such above-ground storage is quite unusual for rodents. Here, we investigated whether there is a relationship between the seed species preferred as building materials and those preferred for food. We conducted a seed preference test using three most collected weed species for mound building. Controlling factors like food availability or predation risk, mice prefer Setaria spp. as food, although Amaranthus spp. and Chenopodium spp. were preferentially harvested and stored. By including the availability of the three species, our experimental results were confirmed, namely, a clear preference for Setaria spp. Also, handling time and seed size revealed to influence plant choice.     

Lifetime accumulation of (137)Cs and (40)K in the ribs and sternum of an Austrian "mountain pasture" cow

The accumulation of natural and artificial radionuclides in humans and domestic animals is of interest in estimating effective doses of exposed humans and to decide whether animal products can be used for nutrition of the population. In this paper we present an investigation of the (137)Cs- and (40)K-activity levels of the ribs and sternum of a "mountain pasture" cow, born in a highly contaminated region of Styria, Austria, at the time of the radioactive fallout following the Chernobyl accident. This is the first systematic investigation of the variation in activity levels of a contaminated animal. The International Commission on Radiological Protection (ICRP) assumes that cesium and potassium are homogenously distributed throughout the whole body of an organism. However, the presented results show that there is a non-uniform distribution of (137)Cs and (40)K in different skeletal bones and their adherent tissues of a dairy cattle. We found that activity concentrations of (137)Cs and (40)K varied up to a factor 2.5 in different components of the ribs. The minimum values of (137)Cs and (40)K in the ribs were 29.9 and 21Bqkg(-1) fresh mass for trabecular bone in the vertebral half of asternal ribs, and the maximum values 332 and 132Bqkg(-1) fresh mass for a mixed sample composed of a cartilaginous tissue layer and parts of the perichondrium, both originating from asternal costal cartilages, respectively.     

Stokes drift through corals

Motivated by shallow ocean waves propagating over coral reefs, we investigate the drift velocities due to surface wave motion in an effectively inviscid fluid that overlies a saturated porous bed of finite depth. Previous work in this area either neglects the large-scale flow between layers (Phillips in Flow and reactions in permeable rocks, Cambridge University Press, Cambridge, 1991) or only considers the drift above the porous layer (Monismith in Ann Rev Fluid Mech 39:37–55, 2007). Overcoming these limitations, we propose a model where flow is described by a velocity potential above the porous layer and by Darcy’s law in the porous bed, with derived matching conditions at the interface between the two layers. Both a horizontal and a novel vertical drift effect arise from the damping of the porous bed, which requires the use of a complex wavenumber k. This is in contrast to the purely horizontal second-order drift first derived by Stokes (Trans Camb Philos Soc 8:441–455, 1847) when working with solely a pure fluid layer. Our work provides a physical model for coral reefs in shallow seas, where fluid drift both above and within the reef is vitally important for maintaining a healthy reef ecosystem (Koehl et al. In: Proceedings of the 8th International Coral Reef Symposium, vol 2, pp 1087–1092, 1997; Monismith in Ann Rev Fluid Mech 39:37–55, 2007). We compare our model with field measurements by Koehl and Hadfield (J Mar Syst 49:75–88, 2004) and also explain the vertical drift effects as documented by Koehl et al. (Mar Ecol Prog Ser 335:1–18, 2007), who measured the exchange between a coral reef layer and the (relatively shallow) sea above.

     

Biobased Fiber Production: Enzyme Retting for Flax/Linen Fibers

Flax (Linum ustitatissimum L.) is the source of natural fibers that provides biobased products for a variety of existing markets, but considerable processing and cleaning is required. Flax fibers, and bast fibers generally, are produced in the outer regions of the stem between bark and inner core tissues and require retting, which is the microbial separation of fiber from nonfiber tissues, as the first and most limiting stage of processing. Enzyme retting offers a method to overcome disadvantages of the current method, i.e., dew-retting, for high- and consistent-quality fibers with tailored properties for specific applications. Using chemical analyses, microscopy, and microspectroscopy, sites of carbohydrates, aromatics, and waxes plus cutins were identified in flax stems and their relationship to effective enzyme retting determined. Aromatics occur mostly in the inner, core tissues, with the fibers containing only small amounts located sporadically in cell corners of fiber bundles. Therefore, effective retting using enzymes to separate the aromatic-containing tissues from the fibers, but not to degrade aromatic compounds per se, is required. Waxes and cutin in the epidermal regions are effective barriers to enzyme penetration, and mechanical disruption facilitates enzyme penetration into the stems. Pectinases, with chelators to remove Ca⁺⁺ and destabilize pectin molecules, remove matrix compounds holding fibers within the stem and have been used in effective formulations to ret flax stems.     

A network approach to prioritize conservation efforts for migratory birds

Habitat loss can trigger migration network collapse by isolating migratory bird breeding grounds from nonbreeding grounds. Theoretically, habitat loss can have vastly different impacts depending on the site's importance within the migratory corridor. However, migration-network connectivity and the impacts of site loss are not completely understood. We used GPS tracking data on 4 bird species in the Asian flyways to construct migration networks and proposed a framework for assessing network connectivity for migratory species. We used a node-removal process to identify stopover sites with the highest impact on connectivity. In general, migration networks with fewer stopover sites were more vulnerable to habitat loss. Node removal in order from the highest to lowest degree of habitat loss yielded an increase of network resistance similar to random removal. In contrast, resistance increased more rapidly when removing nodes in order from the highest to lowest betweenness value (quantified by the number of shortest paths passing through the specific node). We quantified the risk of migration network collapse and identified crucial sites by first selecting sites with large contributions to network connectivity and then identifying which of those sites were likely to be removed from the network (i.e., sites with habitat loss). Among these crucial sites, 42% were not designated as protected areas. Setting priorities for site protection should account for a site's position in the migration network, rather than only site-specific characteristics. Our framework for assessing migration-network connectivity enables site prioritization for conservation of migratory species.     

Nationwide Air Pollution Control Training Efforts: Status Quo vs. Needs

This paper briefly reviews the historical development of air pollution training activities in the U. S. It describes the various types of training programs currently available, such as short courses, specialized programs, and university training at the graduate level. The level of financial support and the number of individuals enrolled in these programs are discussed. The paper concludes with an outline of future needs in terms of changes in existing training programs, extension into new areas, and the critical problem of recruitment of qualified candidates for training.     

Evaluation of Absorption Sampling Devices

The information presented in this paper is directed to those with the responsibility of designing and operating air quality monitoring networks. An analytical model for location of monitor sites based upon maximizing a sum of coverage factors for each source is developed. An heuristic solution method from the facilities location analysis literature is used for solution of the model. Results of an example problem are presented and compared with the monitoring network currently In place. The model is shown to be a valuable addition to the methods available to the air quality monitor network designer. Needs for further research are pointed out.