Organochlorine insecticide residues in Egyptian mothers’ milk

Two hundred ninety‐two mother's milk samples were collected during 1994 from ten Egyptian governorates representing rural, metropolitan, and newly reclaimed desert areas. The samples were analyzed for 14 organochlorine insecticides and metabolites using electron capture gas chromatography and confirmed by gas chromatography/mass spectrometry (GC/MS). The overall samples average showed that the most abundant organochlorine insecticide residues were p,p'‐DDE, α‐endosulfan, β‐HCH and, p,p’‐DDT. Residues in the range of not detectable to less than 14μg/l whole milk were recorded for α‐HCH, heptachlor, heptachlor epoxide, aldrin, dieldrin, endrin endrin aldehyde and p,p'‐DDD. The percentage of samples exceeding the acceptable daily intake for children (ADIs) set by the FAO/WHO ranged from 19% to 44% in all governorates included in the study except the governorate of Minia in which only 2.6% of the samples exceeded the ADI values. The insecticides exceeding ADI values are mostly heptachlor and heptaclor epoxide (ADI = 3.12 μg/1 whole milk).     

A simple mineral market model: Can it produce super cycles in prices?

This paper develops a stylized supply–demand model for a mineral/nonrenewable commodity. It embodies important distinctions between short-run and long-run mineral supply and the derived demand for minerals as intermediate goods in production sectors with differing intensities of use. This framework is used to address the question: under what conditions might one expect to observe super cycles (i.e. cycles with a period of 20–70 years) in minerals prices? A plausible time path for GDP$GDP$ growth and the structural transformation that accompanies economic development in an emerging region is specified. Using these drivers and reasonable supply and demand parameters, price dynamics are simulated. The result is an asymmetric price cycle with a peak price that is about 250% above trend and an expansion phase that lasts for about 20 years. Thus, this simple model is capable of producing a single cycle with a frequency and amplitude in the range estimated in the empirical literature on super cycles. As other regions reach the development ‘take-off' phase, additional super cycles should emerge.     

Comparison of bacterial community structures in two systems of a sewage treatment plant using PCR-DGGE analysis

Bacterial community was investigated during sludge bulking period using combination of PCR amplification of 16sRNA genes with DGGE analysis.     

Impacts of produced water origin on bacterial community structures of activated sludge

The purpose of this study was to reveal how activated sludge communities respond to influent quality and indigenous communities by treating two produced waters from different origins in a batch reactor in succession. The community shift and compositions were investigated using Polymerase Chain Reaction–denaturing gradient gel electrophoresis(PCR–DGGE) and further16 S ribosomal DNA(r DNA) clone library analysis. The abundance of targeted genes for polycyclic aromatic hydrocarbon(PAH) degradation, nah Ac/phn Ac and C12O/C23 O, was tracked to define the metabolic ability of the in situ microbial community by Most Probable Number(MPN) PCR. The biosystem performed almost the same for treatment of both produced waters in terms of removals of chemical oxygen demand(COD) and PAHs. Sludge communities were closely associated with the respective influent bacterial communities(similarity 60%), while one sludge clone library was dominated by the Betaproteobacteria(38%) and Bacteriodetes(30%)and the other was dominated by Gammaproteobacteria(52%). This suggested that different influent and water quality have an effect on sludge community compositions. In addition, the existence of catabolic genes in sludge was consistent with the potential for degradation of PAHs in the treatment of both produced waters.     

Recent trends in treatment technologies of emerging contaminants

In the recent years a group of contaminants, known collectively as emerging contaminants (ECs), have attracted considerable attention due to their widespread in the environment, and lack of knowledge on their impacts on ecosystem and human health. This review gives an overview on the sources, impacts, and conventional treatment technologies of ECs and an in-depth review of the literature on the state-of-the-art treatment technologies and their performance in the removal of ECs from water sources and drinking water. A careful statistical analysis of the number of publications on the different treatment technologies of ECs was performed to identify the hot spots in this research area. Conventional treatment technologies are not able to remove ECs sufficiently. The discharge of raw or partially treated wastewater is the main source of ECs in the environment. The research in recent years is focusing on using advanced treatment process (AOPs), followed by adsorption and membrane technologies. From a technical point of view, AOPs surpass other treatment technologies as they can completely eradicate ECs without the generation of side products. Developing efficient, green, and cost-effective materials to be used as adsorbents, photocatalysts, membranes, or membrane fillers, is one of the main research trends nowadays. Combined AOPs based on exploiting solar light, ultrasound and electrochemistry are gaining growing interest and show high potential for the treatment of ECs.     

Utilization of Modified Attapulgite for the Removal of Sr(II), Co(II), and Ni(II) Ions from Multicomponent System,Part I: Kinetic Studies

Radionuclide sorption by natural and modified clays is extensively accepted to be an important process from the radioactive waste point of view. This work focused on modification of natural attapulgite with a layered double hydroxide to produce a novel chemisorbent for Sr2+, Ni2+, and Co2+ removal from multicomponent solution. The structural and surface characteristics of both attapulgite (ATP) and modified attapulgite (LDH-ATP) were investigated using XRD, FTIR, SEM, and thermal analysis. Comparison of sorption features of Sr2+, Ni2+, and Co2+ onto ATP and LDH-ATP was achieved; the results indicated that LDH-ATP was the most efficient sorbent for Sr2+, Ni2+, and Co2+. Kinetic studies established that the sorption is fast and reaching >90% within 30 min. The sorption of Sr2+, Ni2+, and Co2+ are well defined by non-linear pseudo-second-order model and controlled by an intra-particle diffusion mechanism. The diffusivity was determined using homogeneous surface diffusion (HSDM) model and found in the order 10−13 m2/min; this confirmed that the sorption of the three ions is chemisorption process. LDH-ATP can be employed as a candidate chemisorbent for the removal of some metal ions from waste solution.     

The effects of different sewage sludge amendment rates on the heavy metal bioaccumulation,growth and biomass of cucumbers (Cucumis sativus L.)

When sewage sludge is incorrectly applied, it may adversely impact agro-system productivity. Thus, this study addresses the reaction of Cucumis sativus L. (cucumber) to different amendment rates (0, 10, 20, 30, 40 and 50 g kg^?1) of sewage sludge in a greenhouse pot experiment, in which the plant growth, heavy metal uptake and biomass were evaluated. A randomized complete block design with six treatments and six replications was used as the experimental design. The soil electrical conductivity, organic matter and Cr, Fe, Zn and Ni concentrations increased, but the soil pH decreased in response to the sewage sludge applications. As approved by the Council of European Communities, all of the heavy metal concentrations in the sewage sludge were less than the permitted limit for applying sewage sludge to land. Generally, applications of sewage sludge of up to 40 g kg^?1 resulted in a considerable increase in all of the morphometric parameters and biomass of cucumbers in contrast to plants grown on the control soil. Nevertheless, the cucumber shoot height; root length; number of leaves, internodes and fruits; leaf area; absolute growth rate and biomass decreased in response to 50 g kg^?1 of sewage sludge. All of the heavy metal concentrations (except the Cu, Zn and Ni in the roots, Mn in the fruits and Pb in the stems) in different cucumber tissues increased with increasing sewage sludge application rates. However, all of the heavy metal concentrations (except the Cr and Fe in the roots, Fe in the leaves and Cu in the fruits) were within the normal range and did not reach phytotoxic levels. A characteristic of these cucumbers was that all of the heavy metals had a bioaccumulation factor <1.0. All of the heavy metals (except Cd, Cu and Zn) had translocation factors that were <1.0. As a result, the sewage sludge used in this study could be considered for use as a fertilizer in cucumber production systems in Saudi Arabia and can also serve as a substitute method of sewage sludge disposal.

The effects of different sewage sludge amendment rates on the heavy metal bioaccumulation, growth and biomass of cucumbers

     

Influence of Some Chelators on the Phytoextraction Ability of Sunflower (Helianthus annuus) for Nickel‐Contaminated Soil

Chelation and complexation of nickel were evaluated as practical ways to solubilize, detoxify, and enhance nickel accumulation by plants. Sunflower (Helianthus annuus) was selected as a potential nickel accumulator in two selected soils with different textures and nickel‐contamination levels. To enhance metal phytoextraction, ammonium nitrate and organic chelators (EDTA and citric acid) were added to soils in pots at rates of 0, 5, 10, and 20 mmol/kg. The pot experiments were run for eight weeks. The highest nickel uptake was obtained in plants grown on clayey soil, and the lowest uptake was observed in sandy soil. Citric acid was the most effective chelator of nickel metals that could enhance nickel accumulation in the sunflower shoots. The ammonium nitrate application showed a low effect on metal translocation into the sunflower shoots. © 2014 Wiley Periodicals, Inc.     

Assessment of natural radioactivity levels in soil samples from some areas in Assiut, Egypt

The natural radioactivity of soil samples from Assiut city, Egypt, was studied. The activity concentrations of 28 samples were measured with a NaI(Tl) detector. The radioactivity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K showed large variations, so the results were classified into two groups (A and B) to facilitate the interpretation of the results. Group A represents samples collected from different locations in Assiut and characterized by low activity concentrations with average values of 46.15?±?9.69, 30.57?±?4.90, and 553.14?±?23.19 for ²²⁶Ra, ²³²Th, and ⁴⁰K, respectively. Group B represents samples mainly collected from the area around Assiut Thermal Power Plant and characterized by very high activity concentrations with average values of 3,803?±?145, 1,782?±?98, and 1,377?±?78 for ²²⁶Ra, ²³²Th, and ⁴⁰K, respectively. In order to evaluate the radiological hazard of the natural radioactivity, the radium equivalent activity (Ra_eq), the absorbed dose rate (D), the annual effective dose rate (E), the external hazard index (H _ex), and the annual gonadal dose equivalent (AGDE) have been calculated and compared with the internationally approved values. For group A, the calculated averages of these parameters are in good agreement with the international recommended values except for the absorbed dose rate and the AGDE values which are slightly higher than the international recommended values. However, for group B, all obtained averages of these parameters are much higher by several orders of magnitude than the international recommended values. The present work provides a background of radioactivity concentrations in the soil of Assiut.     

Natural radionuclides distribution and environmental impacts of ferruginous sand-siltstone (raw material) and their manufactured Ahmer oxide used as wall paints

Commercially known Ahmer oxide paints are prepared from raw material mainly composed of red iron oxides (hematite) and iron oxyhydroxides. The raw material used in manufacturing of Ahmer oxide comes from some localities in southwest Sinai such as Abu Thor, Allouga, and El lehian. The adsorption of uranium and other radioelements on iron oxides could make the raw material (red iron oxides) and their products environmentally hazardous. The studied samples were subjected to radiometric analysis using NaI (Tl) gamma-ray spectrometer. The average activity concentration of U, Th, Ra, and K are 108.7, 458.8, 88.8, and 627.5?Bq?kg^?1, respectively in raw material and 136.4, 14.6, 58.3, and 95.9?Bq?kg^?1 in Ahmer oxide. High values of activity concentrations of ²³⁸U, ²²⁶Ra, and ⁴⁰K were recorded in Allouga and El lehian raw material. High radioactivities of Allouga and El lehian raw material are mainly attributed to the presence of torbernite, zircon, and monazite, in addition to adsorbed elemental uranium in Ahmer oxide. absorbed dose rate (D), annual effective dose equivalent, radium equivalent activity (Ra_eq), external hazard index (H_ex), and internal hazard index (H_in), as well as representative gamma index (Iγ) were determined from the activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K. Some of the studied samples do not satisfy the universal standards.