Transforming submerged-arc welding slags into magnetic glass-ceramics

Submerged-arc welding slag (SAWS) and rice husk (RH) wastes represent two particularly abundant metallurgical and agricultural wastes. This work focusses on the feasibility of SAWS, together with glass cullet and RHs, to develop lightweight porous glass–ceramics that could be useful for technical purposes. Effects of temperatures and amounts of RHs on the porosity and water absorption of porous glass–ceramics were discussed at various dosages of husks up to 20 wt%. Depending on the sintering temperature, XRD measurements confirmed the presence of more than two crystalline phases: diopside, jacobsite, MgAl₂O₄, Ca_1.82Al_3.64Si_0.36O₈ and pyrope. These samples exhibited magnetic properties which were related to the presence of jacobsite phase. Magnetization curve is a characteristic of soft ferromagnetic materials with magnetization saturating at ~0.82 emu/g. The present results show a promising way to treat submerged-arc welding slags, transforming it into useful porous and functional glass–ceramic products via a simple powder technology and sintering approach.     

Hydrophobic and Flame-Retardant Foam Based on Cellulose

Journal of Polymers and the Environment - A study aimed to prepare cellulose-based hydrophobic, lightweight, and flame retardant foam composites. Cellulose was activated by phosphoric acid followed...     

Health disorders among Egyptian municipal solid waste workers and assessment of their knowledge,attitude, and practice towards the hazardous exposure

Environmental Science and Pollution Research - Solid waste workers are exposed to variety of injuries and diseases at work. To study health disorders among workers in the waste management field and...     

Binding of aluminum to human serum transferrin,human serum albumin and rat serum proteins

Abstract

Human serum transferrin (HSTF), human serum albumin (HSA) and rat serum were compared for their interaction with AlCl₃ , in a Tris‐HCl buffer solutions (pH 7.4). The AlCl₃ was tested in series of concentrations in the range of 50 μM up to 500 μM . HSTF, HSA and their 1:1 mixture and rat serum were incubated at 37°C with series of AlCl₃ concentrations. The protein profile of the incubated solutions were compared to control using SDS‐PAGE and FPLC tests. The results indicated that HSTF was more specifically responsive to AlCl₃showing a characteristic increase in its UV absorption, peak and area dimensions. Simultaneously, HSA was less affected, but it showed a significant shift with an increase in molecular weight accompanied with a change in its profile. The respective bands of transferrin and albumin in rat serum behaved similarly. The SDS‐PAGE and FPLC data coincided and confirmed the preferential affinity of HSTF to bind with Al³⁺ . These results support the suggestion of using HSTF for monitoring levels of Al³⁺ in human blood samples of exposed population. The importance of further developing such a biomarker is the increased demand for early detection of the hazardous levels of Al³⁺ in relation to its long term neurotoxic adverse effects.     

Effectiveness of gutter brushes in removing street sweeping waste

Litter on roadways has to be removed for hygiene and to reduce pollution, amongst other reasons. Therefore, the effective operation of street sweepers is important in the collection of solid waste. In this article, the effectiveness of gutter brushes of street sweepers in removing different debris types, namely medium-size gravel, small and fine particles, and wet thin debris is studied by means of sweeping tests using a brushing test rig. Two types of gutter brushes, cutting and F128, are tested under a variety of operating conditions. The experimental tests provide a means of identifying suitable ranges of brush penetration for the different debris types under defined operating parameters such as brush angle of attack, brush rotational speed, and sweeper velocity. These ranges may provide sufficiently high removal forces and avoid the occurrence of sweeping problems such as backward sweeping and inappropriate bristle–surface contact. Optimum operating parameters for the three debris types studied, as well as a mixture of all of them, are determined. Lastly, the results indicate that, as far as the sweeping effectiveness is concerned, the F128 brush is the preferred one for the cases studied.     

Spectrophotometric determination of uranium with arsenazo-III in perchloric acid

A short, sensitive and reliable spectrophotometric method, which has advantages over all known "wet chemistry" methods for uranium determination with regard to tolerance to common interferences, has been developed for the determination of uranium. Selectivity, molar absorptivity and the determination range of uranium have been enhanced by using 0.07% arsenazo-III as a chromogenic reagent. The use of 3 mol dm(-3) perchloric acid as a medium of determination was found to be excellent in terms of good solvent compatibility on dilution, destruction of organic contamination and simplicity of operation. The uranium-arsenazo-III complex formed instantly, and was found to be stable for more than 3 weeks with constant absorbance. Beer's law was obeyed up to a uranium concentration of 16 microg g(-1), with a molar absorptivity at 651 nm of 1.45x10(5) mol(-1) dm(3) cm(-1) at 24+/-2 degrees C. Only phosphate and citrate at 70-fold excess over uranium interfere seriously, whereas other anions studied could be tolerated up to a 70-fold excess over uranium. Of the cations studied, only Mn(II), Co(II), Ni(II), Cu(II) and Cr(III) decreased the normal absorbance of the complex. Iron(III), Ce(III) and Y(III) enhanced the absorbance. Other cations studied did not affect the absorbance up to a 50-fold excess. The accuracy was checked by determining uranium from standard solutions in the range 10-50 microg g(-1). It was found to be accurate with a 96.0-98.6% recovery rate. The method has been successfully applied to standard reference materials and ore samples at microg g(-1) levels.     

Indoor air quality during renovation actions: a case study

A temporary renovation activity releases considerably high concentrations of particulate matter, viable and non-viable, into air. These pollutants are a potential contributor to unacceptable indoor air quality (IAQ). Particulate matter and its constituents lead, sulfate, nitrate, chloride, ammonium and fungi as well as fungal spores in air were evaluated in a building during renovation action. Suspended dust was recorded at a mean value of 6.1 mg m(-3) which exceeded the Egyptian limit values for indoor air (0.15 mg m(-3)) and occupational environments (5 mg m(-3)). The highest particle frequency (23%) of aerodynamic diameter (dae) was 1.7 microm. Particulate sulfate (SO(4)(2-)), nitrate (NO(3)(-)), chloride (Cl(-)), ammonium (NH(4)(+)) and lead components of suspended dust averaged 2960, 28, 1350, 100 and 13.3 microg m(-3), respectively. Viable fungi associated with suspended dust and that in air averaged 1.11 x 10(6) colony forming unit per gram (cfu g(-1)) and 92 colony forming unit per plate per hour (cfu p(-1) h(-1)), respectively. Cladosporium(33%), Aspergillus(25.6%), Alternaria(11.2%) and Penicillium(6.6%) were the most frequent fungal genera in air, whereas Aspergillus(56.8%), Penicillium(10.3%) and Eurotium(10.3%) were the most common fungal genera associated with suspended dust. The detection of Aureobasidium, Epicoccum, Exophiala, Paecilomyces, Scopulariopsis, Ulocladium and Trichoderma is an indication of moisture-damaged building materials. Alternaria, Aureobasidium, Cladosporium, Scopulariopsis and Nigrospora have dae > 5 microm whereas Aspergillus, Penicillium and Verticillium have dae < 5 microm which are suited to penetrate deeply into lungs. Particulate matter from the working area infiltrates the occupied zones if precautionary measures are inadequate. This may cause deterioration of IAQ, discomfort and acute health problems. Renovation should be carefully designed and managed, in order to minimize degradation of the indoor and outdoor air quality.     

Organic dust and gaseous contaminants at wood working shops

Airborne dust bioaerosols, ammonia and formaldehyde levels were determined inside two different (ventilated and unventilated) wood working shops. Airborne dust was found at mean values of 4.3 and 3.01 mg m(-3). These levels were higher than that recommended by Egyptian environmental law [1 mg m(-3) indoor maximum allowable concentration (MAC) for hard wood]. The highest frequency of aerodynamic size distribution of airborne wood dust was detected at a diametre of 4.9 microm which was recorded during a machining operation. Total viable bacteria were recorded at a mean value of 10(4) colony-forming units (cfu) m(-3), whereas Gram-negative bacteria were found at very low counts (10(1) cfu m(-3)). Fungi levels were recorded at mean values of 10(3) and 10(2) cfu m(-3) in ventilated and unventilated shops, respectively. Penicillium, Aspergillus, Cladosporium and yeast species were dominant isolates. Moreover, actinomycetes were found at a mean value of 10(3) cfu m(-3) at both workshops. Ammonia was detected in relatively low concentrations (mean values of 457 and 623 microg m(-3)), whereas formaldehyde was found in relatively moderate concentrations (mean values of 0.42 and 0.64 ppm).