Enhancement of radon exposure in smoking areas

Radium-226 is a significant source of radon-222 which enters buildings through soil, construction materials or water supply. When cigarette smoke is present, the radon daughters attach to smoke particles. Thus, the alpha radiation to a smoker’s lungs from the natural radon daughters is increased because of smoking. To investigate whether the cigarette tobacco itself is a potential source of indoor radon, the α potential energy exposure level contents of radon (²²²Rn, 3.82d) and Thoron (²²⁰Rn, 55.60s) were measured in 10 different cigarette tobacco samples using CR-39 solid-state nuclear track detectors (SSNTDs). The results showed that the ^{222, 220}Rn concentrations in these samples ranged from 128 to 266 and 49 to 148 Bqm⁻³, respectively. The radon concentrations emerged from all investigated samples were significantly higher than the background level. Also, the annual equivalent doses from the samples were determined. The mean values of the equivalent dose were 3.51 (0.89) and 1.44 (0.08) mSvy⁻¹, respectively. Measurement of the average indoor radon concentrations in 20 café rooms was, significantly, higher than 20 smoking-free residential houses. The result refers to the dual (chemical and radioactive) effect of smoking as a risk factor for lung cancer.     

Effect of Gamma Radiation on the Properties of Crosslinked Chitosan Nano-composite Film

Chitosan nano-composite film crosslinked by citric acid and with glycerol as plasticizer and MgO as antibacterial agent was prepared by casting method. MgO nanoparticles were synthesized via calcination method in furnace at 500 °C for 4 h and characterized by X-ray diffraction and transmission electron microscope. The chitosan nano-composite film with composition chitosan/citric/glycerol/magnesium oxide (1 wt%:1 wt%:75 vol%:10 wt%) has high mechanical properties than other films. The effects of different irradiation doses on the mechanical, thermal and antibacterial activity were investigated. The tensile strength enhanced by increasing irradiation dose up to 10 kGy and the elongation negligible changed as irradiation dose increased. The thermal stability slightly increased up to dose 2.5 kGy then decreased with dose increment. The antimicrobial activity film was studied against white mulberry-borne bacterial pathogens either Gram positive or Gram negative bacteria and has positive impact of gamma irradiation on the antimicrobial activity. The use of the selected chitosan nano-composite film which irradiated by dose of 2.5 kGy and has magnesium oxide of average particle size 54.3 nm as new packaging materials found to improve storage quality and shelf-life of mulberry fruit.     

Contaminant transport in groundwater in the presence of colloids and bacteria: Model development and verification

Colloids and bacteria (microorganisms) naturally exist in groundwater aquifers and can significantly impact contaminant migration rates. A conceptual model is first developed to account for the different physiochemical and biological processes, reaction kinetics, and different transport mechanisms of the combined system (contaminant–colloids–bacteria). All three constituents are assumed to be reactive with the reactions taking place between each constituent and the porous medium and also among the different constituents. A general linear kinetic reaction model is assumed for all reactive processes considered. The mathematical model is represented by fourteen coupled partial differential equations describing mass balance and reaction processes. Two of these equations describe colloid movement and reactions with the porous medium, four equations describe bacterial movement and reactions with colloids and the porous medium, and the remaining eight equations describe contaminant movement and its reactions with bacteria, colloids, and the porous medium. The mass balance equations are numerically solved for two-dimensional groundwater systems using a third-order, total variance-diminishing scheme (TVD) for the advection terms. Due to the complex coupling of the equations, they are solved iteratively each time step until a convergence criterion is met. The model is tested against experimental data and the results are favorable.     

Preconcentration and determination of lead and cadmium levels in blood samples of adolescent workers consuming smokeless tobacco products in Pakistan

The present study was aimed to evaluate the cadmium (Cd) and lead (Pb) levels in the blood samples of adolescent boys, chewing different smokeless tobacco (SLT) products in Pakistan. For comparative purpose, boys of the same age group (12–15 years), not consumed any SLT products were selected as referents. To determine trace levels of Cd and Pb in blood samples, a preconcentration method, vortex-assisted liquid–liquid microextraction (VLLME) has been developed, prior to analysis by flame atomic absorption spectrometry. The hydrophobic chelates of Cd and Pb with ammonium pyrrolidinedithiocarbamate were extracted into the fine droplets of ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate, while nonionic surfactant, Triton X-114 was used as a dispersing medium. The main factors affecting the recoveries of Cd and Pb, such as concentration of APDC, centrifugation time, volume of IL and TX-114, were investigated in detail. It was also observed that adolescent boys who consumed different SLT products have 2- to 3-fold higher levels of Cd and Pb in their blood samples as compared to referent boys (p?<?0.001).     

Recommendations on chemicals management policy and legislation in the framework of the Egyptian–German twinning project on hazardous substances and waste management

The sustainable management of chemicals and their associated wastes—especially legacy stockpiles—is always challenging. Developing countries face particular difficulties as they often have insufficient treatment and disposal capacity, have limited resources and many lack an appropriate and effective regulatory framework. This paper describes the objectives and the approach of the Egyptian–German Twinning Project under the European Neighbourhood Policy to improve the strategy of managing hazardous substances in the Egyptian Environmental Affairs Agency (EEAA) between November 2008 and May 2011. It also provides an introduction to the Republic of Egypt’s legal and administrative system regarding chemical controls. Subsequently, options for a new chemical management strategy consistent with the recommendations of the United Nations Chemicals Conventions are proposed. The Egyptian legal and administrative system is discussed in relation to the United Nations’ recommendations and current European Union legislation for the sound management of chemicals. We also discuss a strategy for the EEAA to use the existing Egyptian legal system to implement the United Nations’ Globally Harmonized System of Classification and Labelling of Chemicals, the Stockholm Convention and other proposed regulatory frameworks. The analysis, the results, and the recommendations presented may be useful for other developing countries in a comparable position to Egypt aspiring to update their legislation and administration to the international standards of sound management of chemicals.     

Performance evaluation of solar photovoltaic electricity-generating systems: an Indian perspective

The present work seeks to assess the sustainability of different solar photovoltaic (SPV) electricity-generating systems based upon energy, environment and economics. The sustainability indicators evaluated for energy, environment and economics are electrical output, life-cycle greenhouse gas (GHG) emissions and life-cycle cost of electricity generated per kilowatt hour. The selected SPV-based electricity generation technologies for sustainability evaluation are amorphous, monocrystalline and polycrystalline at different locations and tilt angles across India. For SPV systems, most of the emissions are the result of electricity use during manufacturing. In these cases, an average grid mix for the region of manufacture is typically used to calculate energy use and emissions. Based upon these three indicators, a figure of merit (FM) has been proposed. The results proposed that polycrystalline gives the maximum electrical output, minimum GHG emission, minimum cost and maximum FM at a radiation level of 6 kWh/m²/day with latitude and tilt angle of 34° and 35°, respectively. This work will be helpful to users of solar energy, academicians, researchers and other concerned persons, in understanding the importance, severity and benefits obtained by the application and implementation of the SPV electricity-generating systems.     

Meiobenthic nematode Oncholaimus campylocercoides as a model in laboratory studies: selection,culture, and fluorescence microscopy after exposure to phenanthrene and chrysene

Environmental Science and Pollution Research - Numerous studies have focused on the response of meiofauna after exposure to polycyclic aromatic hydrocarbons (PAHs), but none has been devoted to...     

Salicylic acid to decrease plant stress

Pollution and climate change degrade plant health. Plant stress can be decreased by application of salicylic acid, an hormone involved in plant signaling. Salicylic acid indeed initiates pathogenesis-related gene expression and synthesis of defensive compounds involved in local resistance and systemic acquired resistance. Salicylic acid may thus be used against pathogen virulence, heavy metal stresses, salt stress, and toxicities of other elements. Applied salicylic acid improves photosynthesis, growth, and various other physiological and biochemical characteristics in stressed plants. Salicylic acid antagonizes the oxidative damaging effect of metal toxicity directly by acting as an antioxidant to scavenge the reactive oxygen species and by activating the antioxidant systems of plants and indirectly by reducing uptake of metals from their medium of growth. We review here the use of exogenous salicylic acid in alleviating bacterial, fungal, and viral diseases, heavy metal toxicity, toxicity of essential micronutrients, and salt stress.     

Tank mixture additives approach to improve efficiency of bentazon against broadleaf weeds in peas

Efficiency of different tank-mixed additives with bentazon at half rate was investigated on (Malva parviflora) and other broad leaf weeds compared with bentazon at the full recommended rate without additives in peas in open field. All the tested additives enhanced the efficiency of bentazon at the half rate. Nonyl phenol and toximol S proved to be the most effective additives in comparison with the full rate treatment. The tested treatments did not show any significant effect on chlorophyll content and soil microorganisms. Bentazon residues were determined in certain treatments to investigate the effect of the tested additives on bentazon deposition. Samples were extracted using QuEChERS method and residues were determined using LC-MS/MS. Residues after 24 hours in the half rate treatment reached 4 times lower than the Maximum Residues Limit (MRL) (0.11 mg kg(-1)), compared to the full rate treatment (0.51 mg kg(-1)), that was slightly above the MRL.