Possible change in Asian dust source suggested by atmospheric anthropogenic radionuclides during the 2000s

Decades-long monitoring of anthropogenic radionuclides in the atmospheric deposition in Tsukuba, Japan suggests not only the substantial impacts of the Asian dust (Kosa) on the deposition but also the possible change of the Kosa source region, especially during springs of the 2000s. In order to know more about such change, 4 single wet deposition events occurred in the spring of 2007 were scrutinized. The largest anthropogenic radionuclides wet deposition was supplied by the April 2–4 event. It brought several tens % of the monthly depositions (April 2007) of the dust (residue) mass (4.5 g m^?2) and anthropogenic radionulides (⁹⁰Sr: 16, ¹³⁷Cs: 97 and Pu: 3 mBq m^?2). None of the events observed fulfilled both criteria of the specific activities and ⁹⁰Sr/¹³⁷Cs activity ratio to the Tsukuba soil; they did not exhibit local soil dust signature. The Kosa events in fact have extensive impacts on the atmospheric environment over Japan in spring season. Considering the elevated specific activities as well as greater ¹³⁷Cs/⁹⁰Sr activity ratio in the deposited dust, it is hypothesized that the dust source areas in Asian continent would be shifting from the arid zone to the desert-steppe zone suffering from desertification during the 2000s. This type of the Kosa may be called as the ‘new-regime Kosa’. Chemical observation in the far downwind region of the Kosa dust could allow us to know possible shift in the source regions.     

Potential of Co2 emission reductions by carbonizing biomass waste from industrial tree plantation in South Sumatra,Indonesia

Approximately half of the carbon in trees can be fixed to charcoal by carbonization. Porous charcoal is useful as a soil amendment for crop fields and forests, and also as a water purifying agent. Given these facts, charcoal production should be recognized as one of the most promising CO₂ sequestration methods. A project on biomass utilization and forest conservation is proposed as a Clean Development Mechanism (CDM) project, by incorporating the carbonization of biomass residue and waste from tree plantations and pulp mills, and also the utilization of carbon products in various fields. A feasibility study was conducted with the existing project of an industrial tree plantation and pulp production in Indonesia. If conventional charcoal-making methods are used, a total of 368,000 t yr^-1 of biomass residue and waste could be transformed into charcoal of77,000 t yr^-1, and the carbon emission reductions by the project reaches 62,000t-C yr^-1 (or 230,000 t-CO₂yr^-1) in consideration of the project baseline. This charcoal project could provide jobs for approximately 2,600people. The soil fertility in man-made forests could be maintained by returning charcoal to the original forests. Therefore, the project would be beneficial to the regional economy. In addition, the present charcoal project is expected to give more positive impacts than negative ones, or leakage, beyond the project boundary. This revised version was published online in August 2006 with corrections to the Cover Date.     

Micro dimple milling on cylinder surfaces

The paper presents a micro dimple machining on a cylinder surface with a two-flutes ball end mill. When the cutter axis is inclined and the depth of cut is less than the tool radius, non-cutting time, during which neither of the two cutting edges contacts the workpiece, appears in a rotation of the cutter. The rotation of the workpiece and the feed of the tool are controlled so that the cutting areas do not overlap each other. In order to incline the tool with respect to the tangential direction on the cylinder surface, the tool is located at a position oriented at 45° from the top of the cylinder. An analytical model is presented to control the shapes of the dimples with the cutting parameters. The presented machining is verified in cutting tests with measuring the shape and the profile of the dimples. Pre-machining operations are conducted to have a high cylindricity of the workpiece in longitudinal turning and polishing. The cutter runout of the tool is also eliminated by adjusting the orientation and the position of the tool in the collet chuck with measuring the cutting force. The micro dimples are machined accurately as they are simulated.     

Exposure assessment of lead to workers and children in the battery recycling craft village,Dong Mai,Vietnam

Human exposure to lead (Pb) due to uncontrolled Pb-acid battery recycling has been an environmental health issue in newly developed industrial regions. We conducted a human monitoring survey in Dong Mai, a battery recycling village in Vietnam, to assess exposure status to Pb. Lead level was measured in hair, blood and urine samples of residents in Dong Mai and two reference sites during 4 years spanning 2007–2011. In Dong Mai, Pb levels in three matrixes were significantly higher than those in reference sites. Blood Pb levels of all adults and children exceeded 10 μg/dL, the Centers for Disease Control and Prevention definition of an elevated blood Pb level. Clear increase of urinary δ-aminolevulinic acid (ALA) level with increasing blood Pb level indicated disruption of heme synthesis. One adult exceeded 100 μg/dL of blood Pb, where encephalopathy is of concern. The blood Pb levels achieved various toxic effect threshold values, and elevated blood Pb was not limited to recycling workers, but was also in children and women of reproductive age. Serious pollution status of Dong Mai village suggests an importance of further monitoring surveys in various developing Asian countries.     

Distribution,life history,and production of three species of <Emphasis Type="Italic">Neomysis</Emphasis> in Akkeshi-ko estuary,northern Japan

Spatial and seasonal distribution pattern, life history and production of three species of Neomysis (Mysidacea) which commonly occur in northwestern subarctic Pacific coastal waters, were investigated throughout the year in the Akkeshi-ko estuary, northern Japan. The most abundant species Neomysis awatschensis (annual mean density: 179.8 inds. m⁻², biomass: 108.8 mg DW m⁻²) occurred at the inner part of the estuary including low salinity areas with no clear preference for the seagrass bed. The second most abundant Neomysis mirabilis (mean density: 95.8 inds. m⁻², biomass: 90.1 mg DW m⁻²) occurred at relatively saline seagrass site throughout the year. Occurrence of Neomysis czerniawskii in the estuary was limited to the seagrass bed during summer when their population mainly consisted of juveniles, suggesting that this species is a seasonal migrant between the estuary and the marine environment. Both N. awatschensis and N. mirabilis populations were composed of two generation types, a larger sized overwintering and smaller sized spring/summer generations; however, each species had a different reproductive strategy. N. awatschensis was characterized by fast growth to maturity at a smaller size than N. mirabilis with a relatively high fecundity during warm season, suggesting that this species is an r-strategist which can utilize opportunistically a wide variety of habitats. In contrast, the seagrass bed resident N. mirabilis was a K-strategist which matures at a larger size producing fewer but larger offspring. The annual production of N. awatschensis (0.57–0.70 g DW m⁻², mean of the whole estuary) and N. mirabilis (0.58–0.68 g DW m⁻², mean of the seagrass bed) at their respective habitats was comparable. Consequently, species-specific life history and distribution pattern are concluded to allow Neomysis spp. to coexist in the estuary and the high carrying capacity of seagrass bed is suggested to contribute to maintain their high biomass level.     

Polyfluorinated telomers in indoor air of Japanese houses

The fluorotelomer alcohols (FTOHs) have been detected in various environmental compartments, including indoor and outdoor air, in North America and Europe. In our previous studies, FTOHs were detected at a relative higher concentration in outdoor air in the Keihan (Kyoto–Osaka, one of the major industrial zones) area, Japan compared to reported data. The exposure level of FTOHs in indoor air in the Keihan area remains unclear. In the present study, indoor air FTOH concentrations were investigated using a passive air sampler containing activated carbon felts. The indoor air sampling was conducted in 49 households of the Keihan area, during winter and summer 2008. Most samples contained 6:2 FTOH, 8:2 FTOH, 10:2 FTOH and 8:2 FTOAc. The median concentration of 8:2 FTOH (5.84 ng m^?3) was highest among fluorotelomers, followed by those of 10:2 FTOH (1.12 ng m^?3), 6:2 FTOH (0.29 ng m^?3), and others. Significant correlations among fluorotelomers were observed in collected samples. The association between housing conditions and 8:2 FTOH concentrations showed that samples collected from bed rooms have higher 8:2 FTOH concentrations than those collected from other locations. In addition, samples collected in winter showed lower levels of 8:2 FTOH than those collected in summer. These findings suggest that 8:2 FTOH is the predominant component among fluorotelomers in indoor air, and that there are emission sources of fluorotelomers in indoor environments of the Keihan area. Further investigations into the origins of fluorotelomers are needed to evaluate indoor contamination with fluorotelomers.     

Soil contamination by brominated flame retardants in open waste dumping sites in Asian developing countries

In Asian developing countries, large amounts of municipal wastes are dumped into open dumping sites each day without adequate management. This practice may cause several adverse environmental consequences and increase health risks to local communities. These dumping sites are contaminated with many chemicals including brominated flame retardants (BFRs) such as polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecanes (HBCDs).BFRs may be released into the environment through production processes and through the disposal of plastics and electronic wastes that contain them.The purpose of this study was to elucidate the status of BFR pollution in municipal waste dumping sites in Asian developing countries. Soil samples were collected from six open waste dumping sites and five reference sites in Cambodia, India, Indonesia, Malaysia, and Vietnam from 1999 to 2007. The results suggest that PBDEs are the dominant contaminants in the dumping sites in Asian developing countries, whereas HBCD contamination remains low. Concentrations of PBDEs and HBCDs ranged from ND to 180 μg/kg dry wt and ND to 1.4 μg/kg dry wt, respectively, in the reference sites and from 0.20 to 430 μg/kg dry wt and ND to 2.5 μg/kg dry wt, respectively, in the dumping sites. Contamination levels of PBDEs in Asian municipal dumping sites were comparable with those reported from electronic waste dismantling areas in Pearl River delta, China.     

Comparison of diving behavior and foraging habitat use between chinstrap and gentoo penguins breeding in the South Shetland Islands, Antarctica

Chinstrap, Pygoscelis antarctica, and gentoo, P. papua, penguins are sympatric species that inhabit the Antarctic Peninsula. To evaluate differences in the foraging habitat of these two species, we recorded their foraging locations and diving behavior using recently developed GPS-depth data loggers. The study was conducted on King George Island, Antarctica during the chick-guarding period of both species, from December 2006 to January 2007. The area used for foraging, estimated as the 95% kernel density of dive (>5 m) locations, overlapped partially between the two species (26.4 and 68.5% of the area overlapped for chinstrap and gentoo penguins, respectively). However, the core foraging area, estimated as the 50% kernel density, was mostly separate (12.8 and 25.0% of the area overlapped for chinstrap and gentoo penguins, respectively). Chinstrap penguins tended to use off-shelf (water depth > 200 m) regions (77% of the locations for dives >5 m), whereas gentoo penguins mainly used on-shelf (water depth < 200 m) areas (71% of dive locations). The data on foraging locations, diving behavior, and bathymetry indicated that gentoo penguins often performed benthic dives (28% of dives >5 m), whereas chinstrap penguins almost always used the epipelagic/mid-water layer (96% of dives >5 m). Diving parameters such as diving bottom duration or diving efficiency differed between the species, reflecting differences in the use of foraging habitat. The diving parameters also suggested that the on-shelf benthic layer was profitable foraging habitat for gentoo penguins. Conversely, the relationship between trip duration, date, and stomach content mass suggested that the chinstrap penguins went further from the colony to forage as the season progressed, possibly reflecting a reduction in prey availability near the colony. Our results suggest that chinstrap and gentoo penguins segregated their foraging habitat in the Antarctic coastal marine environment, possibly due to inter- and intra-specific competition for common prey resources.