Detailed study on the levels of polychlorinated dibenzo-p-dioxins,polychlorinated dibenzofurans and polychlorinated biphenyls in Yusho rice oil

One bottle of Yusho rice oil was obtained from a Yusho family in 1998. The levels of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs) in the causal oil were investigated with two different approaches and the individual concentrations of all the 17 2,3,7,8-substituted PCDD/F and 14 coplanar PCB (Co-PCB) congeners were elucidated for the first time. The concentrations of PCDDs and PCDFs were found to be 0.60 and 8.8 ppm, respectively. For PCBs, more than 130 PCB peaks were observed and a total concentration of 850 ppm including 170 ppm of Co-PCBs was obtained. The toxic equivalents (TEQs) of PCDDs, PCDFs, and Co-PCBs were calculated to be 17, 470, and 120 ppb, respectively. The relative contribution of these classes to the total TEQ in Yusho oil is 3%, 77%, and 20%, respectively, indicating that PCDFs play a major role in the toxicity of Yusho oil. Furthermore, it was confirmed that 2,3,4,7,8-penta-CDF contributes 58% to the total TEQ, supporting the view that this compound is the principal causal agent in Yusho poisoning. It is noteworthy that the most toxic 2,3,7,8-tetra-CDD was newly discovered, although it contributes only 0.1% to the total TEQ. Based on our data, the smallest TEQ intake during the latent period was estimated to be 0.067 mg for Yusho patients. This value is about 60% of that previously reported, suggesting a lower minimum threshold level for the development of the toxic symptoms of Yusho.     

Impact of FEBRA (fermented brown rice with Aspergillus oryzae) intake and concentrations of PCDDs, PCDFs and PCBs in blood of humans from Japan

Impact of FEBRA (fermented brown rice with Aspergillus oryzae, a rich dietary fiber) intake on the concentrations of polychlorinated-biphenyls (PCBs), -dioxin-like polychlorinated biphenyls (DLPCBs), -dibenzo-p-dioxins (PCDDs), and -dibenzofurans (PCDFs) in blood of nine married Japanese were studied for 2 years. Concentrations of total PCBs (average+/-standard deviation) were greater 326,000+/-263,000 and 207,000+/-89,000 in FEBRA-intake and non-FEBRA-intake groups, respectively, on pg/g lipid (from now onwards data expressed on pg/g lipid). DLPCBs were second major contaminants 94,000+/-77,000 and 60,000+/-28,000, orderly in FEBRA-intake and non-FEBRA-intake groups. The concentrations of PCDD/DFs were several orders of magnitude lower than those of PCBs, whereas PCDDs were greater (433+/-233 and 512+/-511, in FEBRA-intake and non-FEBRA-intake groups, respectively) than PCDFs (56+/-50 and 43+/-35). Calculated toxic equivalency (TEQ) concentrations were 34+/-24 and 23+/-10 in FEBRA-intake and non-FEBRA-intake groups, respectively. In order to corroborate the impact of FEBRA, the changes of PCDD/DFs and PCB concentrations for 0.5-year, 1-year, 1.5-year, and 2-year samples were estimated from average concentration of 1-day before study commences and 1-week study samples. The results explicit FEBRA-intake group eliminated 7%, 33%, 45%, 36%, and 26% and non-FEBRA-intake group eliminated 8%, 28%, 36%, 31%, and 20% of DLPCBs, PCDDs, PCDFs, PCDD/DF TEQ and total TEQ, respectively. This study is the first of its kind showing the possible elimination of PCDDs, PCDFs and their TEQ in humans from Japan after the consumption of FEBRA.     

Substance flow analysis of coplanar PCBs released from waste incineration processes

Previous reports have focused on the emission of coplanar polychlorinated biphenyls (Co-PCBs) which have a toxic mechanism similar to that of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDDs/DFs) released from municipal solid waste (MSW) incineration. Such emissions accounted for a small percentage of all the dioxins (PCDDs/DFs and Co-PCBs) recorded at the toxicity equivalent (TEQ) level. There is, however, very little information about Co-PCBs, such as the quantities being released and their effect on overall environmental pollution. The aim of this research has been to clarify the substance flow of Co-PCBs from MSW incineration processes. The results reveal that whereas the input of Co-PCBs into the MSW incineration facilities in Kyoto City was 0.13–0.29 μg-TEQ per ton waste, the total output of Co-PCBs (the sum of Co-PCBs released from emission gas, fly ash, and bottom ash) was 4.9 μg-TEQ per ton waste. The total output was therefore found to be higher than the total input. Over 90% of the total PCBs were decomposed in the incineration process. In comparing the profiles of congeners and homologues, those in the MSW were found to be similar to those detected in the atmosphere and products containing PCBs, but different from those in the MSW incineration gas. Received: August 26, 1998 / Accepted: March 2, 1999     

Reduction behaviors of permanganate by microbial cells and concomitant accumulation of divalent cations of Mg2+, Zn2+, and Co2+

Permanganate treatment is widely used for disinfection of bacteria in surface-contaminated water. In this paper, the fate of the dissolved permanganate in aqueous solution after contact with cells of Pseudomonas fluorescens was studied. Concomitant accumulation of divalent cations of Mg~(2+), Zn~(2+), and Co~(2+) during precipitation of Mn oxides was also studied. The time course of the Mn concentration in solution showed an abrupt decrease after contact of Mn(VII) with microbial cells, followed by an increase after ～ 24 hr.XRD analysis of the precipitated Mn oxides, called biomass Mn oxides, showed the formation of low-crystalline birnessite. Visible spectroscopy and X-ray absorption near edge structure(XANES) analyses indicated that dissolved Mn(VII) was reduced to form biomass Mn oxides involving Mn(IV) and Mn(III), followed by reduction to soluble Mn(II).The numbers of electron transferred from microbial cells to permanganate and to biomass Mn oxides for 24 hr after the contact indicated that the numbers of electron transfer from microbial cell was approximately 50 times higher to dissolved permanganate than to the biomass Mn oxides in present experimental conditions. The 24 hr accumulation of divalent cations during formation of biomass Mn oxides was in the order of Co~(2+) Zn~(2+) Mg~(2+).XANES analysis of Co showed that oxidation of Co~(2+) to Co~(3+) resulted in higher accumulation of Co than Zn and Mg. Thus, treatment of surface water by KMnO_4 solution is effective not only for disinfection of microorganisms, but also for the elimination of metal cations from surface water.     

Substance flow analysis of brominated flame retardants and related compounds in waste TV sets in Japan

We conducted time-series substance flow analysis of two types of brominated flame retardants (BFRs)--polybrominated diphenyl ethers (PBDEs) and tetrabromobisphenol A (TBBPA)--and two types of related compounds--Sb (used with BFRs for flame inhibition) and polybrominated dibenzo dioxins and furans (PBDDs/DFs: unintended byproducts)--in five size categories of waste TV sets in Japan. Two scenarios were created with BFR substitutions and compared to a "business as usual" scenario in order to obtain basic information for strategic product management. The results showed that the use of DecaBDE in rear and front covers of TV sets began in fiscal 1987-1990 and 1993-1996, respectively, and that TBBPA was used to some extent as a substitute for DecaBDE in the 90s. The amount of waste Br in the plastic covers is predicted to increase until at least fiscal 2020 due to the increasing size of TV sets. Although substitution of BFRs with non-BFRs in Japan by 2006 will reduce waste Br, the amount in waste TV sets will not peak until fiscal 2009. The results will help inform decisions in Japan regarding the recovery and disposal of waste TV sets. The methods used would benefit waste managers faced with similar issues in other countries.     

Distribution flow of used motorcycles exported from Japan

This study focuses on used motorcycles (UMCs) that are exported from Japan, observes identifiable characteristics of each destination country's UMC exports, and categorizes their distribution flows. Based on the findings from precedent research, results from compiled data of trade statistics, and field surveys, this study reveals the following characteristics. (1) UMCs are continuously exported to the United Arab Emirates (UAE), but the export numbers fluctuate yearly. The UAE also exports large numbers of UMCs with low displacements and UMCs from all statistical categories except for “other.” (2) The number of UMCs exports to Cambodia has been increasing since 2011. In addition, changes in exports from 51 to 250 cc to low displacements of 50 cc and less are identified. Cambodia also exported UMCs from all statistical categories except “other.” (3) The number of UMCs exports to Myanmar has been increasing since 2015, and the primary units exported exhibit “electric motor propulsion as a motor driving force.” (4) Country trade features are identified and UAE is designated as a “transit trade type” and both Cambodia and Myanmar as “domestic distribution types.”

     

Motorcycle recycling flow and end-of-life motorcycles in Japan

Journal of Material Cycles and Waste Management - This study compiled the number of End-of-Life motorcycles (ELMCs), utilizing Japanese official motorcycle data to clarify “the...