Atmospheric deposition of organic micropollutants in Norway studied by means of moss and lichen analysis

Moss and lichen samples from eleven remote sites from all parts of Norway were analysed for persistent chlorinated hydrocarbons. The highest and lowest concentration levels were found in the most southwesterly and northerly locations, respectively. Moss and lichen samples from one site were also analysed for other organic micropollutants. They were found to contain alkanes, mostly of biogenic origin, PAH and phthalates.     

Atmosphärische Deposition und Anreicherung von Schwermetallen und Stickstoff in Natura-2000-Gebieten Deutschlands

Purpose Under the Convention on Long-range Transboundary Air Pollution mosses are used to map the bioaccumulation of heavy metals and nitrogen throughout Europe. To this end, since 1990 mosses were sampled and analyzed chemically every five years. The goal of this article is to apply the moss survey data for assessing the bioaccumulation of Cd, Pb and N in German Natura 2000 Sites of Community Importance (SCI). Methods The temporal trends of the heavy metal bioaccumulation within SCIs were analyzed using a multi metal index (MMI) calculated by means of geostatistics and percentile statistics. For nitrogen, only monitoring values for 2005 were available for the assessment. The geostatistically estimated values of the metal and nitrogen concentrations in mosses were transformed to estimated deposition values by use of regression analyses. Subsequently, the results were integrated into the assessment of the German SCIs. Results Highest metal loads within SCIs were detected in 1990, followed by a continuous decrease to 2000 and a significant increase until 2005. Regarding N, a median of 1.5?% nitrogen in the dry mass was calculated. The deposition values calculated from the moss estimates resulted in median values of 0.33?g/ha/a for Cd, 8.2?g/ha/a for Pb and 16.7?kg/ha/a for nitrogen. Conclusions The Moss-Monitoring is the only environmental monitoring programme which enables statistically sound estimations of the exposure of SCI to environmental contaminants in terms of heavy metal and nitrogen deposition and bioaccumulation.     

Priority effects and species sorting in a long paleoecological record of repeated community assembly through time

We studied the relative roles of environmental species sorting and priority effects in the assembly of ecological communities on long time scales, by analyzing community turnover of water fleas (Daphnia) in response to strong and recurrent environmental change in a fluctuating tropical lake. During the past 1800 years, Lake Naivasha (Kenya) repeatedly fluctuated between a small saline pond habitat during lowstands and a large freshwater lake habitat during highstands. Starting from a paleoecological reconstruction, we estimated the role of priority effects in Daphnia community assembly across 16 of these habitat turnovers and compared this with the response of the community to reconstructed changes in three environmental variables important for species sorting. Our results indicate that the best predictor of Daphnia community composition during highstands was the community composition just prior to the transition from lowstands to highstands. This reflects a long-lasting priority effect of late lowstand communities on highstand communities, arising when remnant lowstand populations fill newly available ecological space in the rapidly expanding lake habitat. Species sorting and priority effects had a comparable but relatively small influence on community composition during the lowstands. Moreover, these priority effects decayed rapidly with time as Daphnia communities responded to environmental change, in contrast with the highstand communities where priority effects lasted for several decades.     

Modelling spatial patterns of correlations between concentrations of heavy metals in mosses and atmospheric deposition in 2010 across Europe

Background

This paper aims to investigate the correlations between the concentrations of nine heavy metals in moss and atmospheric deposition within ecological land classes covering Europe. Additionally, it is examined to what extent the statistical relations are affected by the land use around the moss sampling sites. Based on moss data collected in 2010/2011 throughout Europe and data on total atmospheric deposition modelled by two chemical transport models (EMEP MSC-E, LOTOS-EUROS), correlation coefficients between concentrations of heavy metals in moss and in modelled atmospheric deposition were specified for spatial subsamples defined by ecological land classes of Europe (ELCE) as a spatial reference system. Linear discriminant analysis (LDA) and logistic regression (LR) were then used to separate moss sampling sites regarding their contribution to the strength of correlation considering the areal percentage of urban, agricultural and forestry land use around the sampling location. After verification LDA models by LR, LDA models were used to transform spatial information on the land use to maps of potential correlation levels, applicable for future network planning in the European Moss Survey.

Results

Correlations between concentrations of heavy metals in moss and in modelled atmospheric deposition were found to be specific for elements and ELCE units. Land use around the sampling sites mainly influences the correlation level. Small radiuses around the sampling sites examined (5 km) are more relevant for Cd, Cu, Ni, and Zn, while the areal percentage of urban and agricultural land use within large radiuses (75–100 km) is more relevant for As, Cr, Hg, Pb, and V. Most valid LDA models pattern with error rates of <?40% were found for As, Cr, Cu, Hg, Pb, and V. Land use-dependent predictions of spatial patterns split up Europe into investigation areas revealing potentially high (=?above-average) or low (=?below-average) correlation coefficients.

Conclusions

LDA is an eligible method identifying and ranking boundary conditions of correlations between atmospheric deposition and respective concentrations of heavy metals in moss and related mapping considering the influence of the land use around moss sampling sites.

     

Xenobiotic benzotriazoles—biodegradation under meso- and oligotrophic conditions as well as denitrifying,sulfate-reducing,and anaerobic conditions

The intensive use of benzotriazoles as corrosion inhibitors for various applications and their application in dishwasher detergents result in an almost omnipresence of benzotriazole (BTri), 4-methyl- and 5-methyl-benzotriazole (4-TTri and 5-TTri, respectively) in aquatic systems. This study aims on the evaluation of the biodegradation potential of activated sludge communities (ASCs) toward the three benzotriazoles regarding aerobic, anoxic, and anaerobic conditions and different nutrients. ASCs were taken from three wastewater treatment plants with different technologies, namely, a membrane bioreactor (MBR-MH), a conventional activated sludge plant CAS-E (intermittent nitrification/denitrification), and CAS-M (two-stage activated sludge treatment) and used for inoculation of biodegradation setups. All ASCs eliminated up to 30 mg L^?1 5-TTri and BTri under aerobic conditions within 2–7 and 21–49 days, respectively, but not under anoxic or anaerobic conditions. 4-TTri was refractory at all conditions tested. Significant differences were observed for BTri biodegradation with non-acclimated ASCs from MBR-MH with 21 days, CAS-E with 41 days, and CAS-M with 49 days. Acclimated ASCs removed BTri within 7 days. Furthermore, different carbon and nitrogen concentrations revealed that nitrogen was implicitly required for biodegradation while carbon showed no such effect. The fastest biodegradation occurred for 5-TTri with no need for acclimatization, followed by BTri. BTri showed sludge-specific biodegradation patterns, but, after sludge acclimation, was removed with the same pattern, regardless of the sludge used. Under anaerobic conditions in the presence of different electron acceptors, none of the three compounds showed biological removal. Thus, presumably, aerobic biodegradation is the major removal mechanism in aquatic systems.     

Optimizing the performance of phase-change materials in personal protective clothing systems.

Phase-change materials (PCM) can be used to reduce thermal stress and improve thermal comfort for workers wearing protective clothing. The aim of this study was to investigate the effect of PCM in protective clothing used in simulated work situations. We hypothesized that it would be possible to optimize cooling performance with a design that focuses on careful positioning of PCM, minimizing total insulation and facilitating moisture transport. Thermal stress and thermal comfort were estimated through measurement of body heat production, body temperatures, sweat production, relative humidity in clothing and subjective ratings of thermal comfort, thermal sensitivity and perception of wetness. Experiments were carried out using 2 types of PCM, the crystalline dehydrate of sodium sulphate and microcapsules in fabrics. The results of 1 field and 2 laboratory experimental series were conclusive in that reduced thermal stress and improved thermal comfort were related to the amount and distribution of PCM, reduced sweat production and adequate transport of moisture.     

The role of risk perception and other risk-related judgements in transportation mode use

AimsThe core aim of the present study was to examine the role of risk perception in use of private and public modes of transportation. An additional aim was to examine the relative importance of perception of transport risks with risk perception of non-transport factors and also to investigate differences in worry, perceived control of transportation modes, as well as trust in authorities’ risk handling, safety motivation, and attitudes towards transport safety.SampleThe results are based on a mailed self-completion questionnaire survey carried out among a representative sample of the Norwegian public aged from 18 to 65 years (n = 1864). Data collection was carried out during October–December 2008.ResultsPerceived control related to private modes of transportation, knowledge about safety and trust in authorities were found to be significantly different among respondents who often used private modes of transportation compared to those who most often used public modes. It was no significant difference in severity of consequences due to which transport modes that the respondents used most frequently.ConclusionIt may be that conclusions of previous research about the role of consequence judgement for precautionary action and demand for risk reduction are misleading when generalised to decisions about transport mode use.