Trace metal speciation during dry and wet weather flows in the Tama River, Japan, by using diffusive gradients in thin films (DGT)

The labile species of Ni, Cu, Zn, Cd, and Pb in the Tama River, an urban river in Tokyo, Japan, were measured using diffusive gradients in thin films (DGT) method under dry and wet weather conditions, and the results were compared with total dissolved concentrations in hourly samples collected in parallel. A total of 10 DGT deployments were made and 251 hourly samples were collected during 2 rounds of sampling, conducted between August and October, 2006. Two types of diffusive gradients in thin films (DGT) devices-DGT-RG for labile inorganic and DGT-APA for total (inorganic and organic) labile species-were applied throughout the samplings. The proportions of metals measured by DGT, compared with the dissolved metal concentrations (filtered using a membrane of 0.5 microm pore size), were 38 +/- 5% (RG) and 45 +/- 8% (APA) for Ni and 45 +/- 22% (RG) and 53 +/- 23% (APA) for Zn. No labile Cu was detected throughout the sampling; Cu was assumed to be in stable complexed forms. Labile Pb was detected in 3 out of 10 deployments only; the rest were lower than the detection limit. Dissolved and labile Cd concentrations were below the detection limits. Three rain events encountered during the sampling periods were evaluated. Rains brought considerably higher loads of metals in dissolved form, and DGT measurements indicated that labile metal loads also increased. Selected DGT measurements were compared with the WHAM 6 speciation model and found to be similar to the model-computed results.     

Experimental verification for real-time environmental emergency response system: WSPEEDI by European tracer experiment

Japan Atomic Energy Research Institute has developed an emergency response system WSPEEDI to forecast long-range atmospheric dispersions of radionuclides discharged into the atmosphere. The latest version of WSPEEDI consists of an atmospheric dynamic model MM5 for calculating meteorological fields and a particle random-walk model for atmospheric dispersion. The performance of WSPEEDI was evaluated by data obtained from a field tracer experiment over Europe (ETEX) in this paper. The model validation was done with respect to the following points: (1) the dependence of model accuracy on the temporal and spatial resolutions of the meteorological fields and (2) the superiority of an atmospheric dynamic model over a mass-consistent wind model. Regarding (1), it was shown that the calculation accuracy of the new version with high temporal resolution was improved, especially at the edge of the plume. Moreover, although the increase in horizontal spatial resolution of the old version had no substantial effect on the model performance, increase in horizontal resolution of the new version contributed to the significant improvement of the calculation accuracy. These results showed that the dynamically calculated meteorological field with the spatial resolution of the meso-β–γ scale greatly improved calculation accuracy.     

Global Environment Facility’s support for sustainable waste management

From the global perspective, the issue of waste management is becoming increasingly important. Given the increasing amount and diversifying content of waste, countries should seek out sustainable waste management options, which protect both local and global environments. The Global Environment Facility (GEF), a public financial institution, has supported sustainable waste management in developing countries in achieving global environmental benefits. The GEF’s support for sustainable waste management, from its pilot phase to the end of the fifth replenishment period, has amounted to 118 projects across the globe. Harmful chemicals, such as polychlorinated biphenyls (PCBs), and “waste to energy” initiatives have been the main focuses of the GEF’s support. The GEF’s investment in sustainable waste management has increased in recent years, partly due to the fact that countries are required to manage Persistent Organic Pollutant (POP) wastes in an environmentally safe manner in compliance with the Stockholm Convention on POPs. The GEF is poised to enhance its support for sustainable waste management in the future by mobilizing other financing, integrating multiple focal areas, expanding viewpoints to sustainable cities, and reinforcing its results-based management.     

Pyrosequencing Analysis of Norovirus Genogroup II Distribution in Sewage and Oysters: First Detection of GII.17 Kawasaki 2014 in Oysters

Norovirus GII.3, GII.4, and GII.17 were detected using pyrosequencing in sewage and oysters in January and February 2015, in Japan. The strains in sewage and oyster samples were genetically identical or similar, predominant strains belonging to GII.17 Kawasaki 2014 lineage. This is the first report of GII.17 Kawasaki 2014 in oysters.     

Hardening performance of reclaimed gypsums for stabilizing agent to improve soft clayey ground

For a prospective solution of effective recycling of gypsum board wastes, the present study was conducted to evaluate applicability of reclaimed gypsum as stabilizing agent for improvement of soft clayey ground. A series of unconfined compression tests and needle penetration tests were conducted to understand the fundamental properties of reclaimed gypsum and gypsum treated soils and the durability in water. An important finding was strength decrease in relation to mixing time of gypsum and soil. This may attribute to excessive mixing that caused breakage of the promptly hardened gypsum treated clay. In addition, from sounding and laboratory tests on the stabilized ground by shallow mixing method with different execution conditions, it was found that the strength of stabilized ground appeared in an early stage and that the hardening effect of cement that was used in combination with gypsum continued in a longer period. Regarding an environmental aspect, a specific amount of cement could have restrained leaching fluorine satisfactorily under the standard level in the field by adopting suitable mixing proportions based on the laboratory mixing test results. For practical application, the mixing procedure was a major factor of strength growth when hemihydrate gypsum was used to stabilize soft clayey ground.     

Relation of dietary inorganic arsenic exposure and urinary inorganic arsenic metabolites excretion in Japanese subjects

Inorganic arsenic (InAs) is a ubiquitous metalloid that has been shown to exert multiple adverse health outcomes. Urinary InAs and its metabolite concentration has been used as a biomarker of arsenic (As) exposure in some epidemiological studies, however, quantitative relationship between daily InAs exposure and urinary InAs metabolites concentration has not been well characterized. We collected a set of 24-h duplicated diet and spot urine sample of the next morning of diet sampling from 20 male and 19 female subjects in Japan from August 2011 to October 2012. Concentrations of As species in duplicated diet and urine samples were determined by using liquid chromatography-ICP mass spectrometry with a hydride generation system. Sum of the concentrations of urinary InAs and methylarsonic acid (MMA) was used as a measure of InAs exposure. Daily dietary InAs exposure was estimated to be 0.087 µg kg^?1 day^?1 (Geometric mean, GM), and GM of urinary InAs+MMA concentrations was 3.5 ng mL^?1. Analysis of covariance did not find gender-difference in regression coefficients as significant (P > 0.05). Regression equation Log ₁₀ [urinary InAs+MMA concentration] = 0.570× Log ₁₀ [dietary InAs exposure level per body weight] + 1.15 was obtained for whole data set. This equation would be valuable in converting urinary InAs concentration to daily InAs exposure, which will be important information in risk assessment.     

A numerical experiment of roadside diffusion under traffic-produced flow and turbulence

Roadside air pollution due to heavy traffic is one of the unsettled issues in the atmospheric environment in urban areas. As a practical application of a Computational Fluid Dynamics (CFD) model, a coupled mesoscale-CFD model was applied to the Ikegamicho area of Kawasaki City, Japan. For this study, the effects of traffic-produced flow and turbulence (TPFT) on the dispersion of the pollutants near the heavy traffic road were mainly investigated in an actual urban area. First, a series of preliminary CFD calculations was conducted for a road tunnel field experiment to obtain a fitting parameter for the traffic-produced flow. The calculation was then performed for 24 h in December 2005 around Ikegamicho, and the results were compared with the data at a roadside monitoring post in the area, located 10 m from the boundary of the ground road. In general, the effect of traffic-produced flow and turbulence was limited at the downstream side of the roads. The maximum concentration of NO_x was reduced and smoothed out along the traffic flow by the traffic-produced flow and turbulence on the road. The effects of traffic-produced turbulence on the dispersion of pollutants were greater than those of traffic-produced flow; however, the effects of traffic-produced flow were not negligible. The concentration of pollutants was not particularly dependent on the turbulent Schmidt number because most of the emission sources were introduced as volume sources in the present calculations, and the effect caused by differences in the material diffusion coefficient was not particularly significant at the outside of the road.     

Identification of particles containing chromium and lead in road dust and soakaway sediment by electron probe microanalyser

Individual particles containing Cr and/or Pb and other major components were identified in road dust from a heavily used road (hereinafter 'heavy traffic road dust'), road dust from a residential area and soakaway sediment by electron probe microanalyser to locate their sources and carrier particles. Individual particles containing high levels of Cr and/or Pb (>or=0.2%) were identified using wavelength dispersive spectrometry (WDS) map analysis. Chromium, Pb and other major elements were then determined by means of a combination of WDS and energy-dispersive spectrometry in all identified particles, 50 particles containing neither Cr nor Pb from each type of road dust and soakaway sediment, and yellow road line markings. WDS map analysis revealed that many particles containing both Cr and Pb were present among the identified particles in heavy traffic road dust, whereas they were minor components in road dust from the residential area and soakaway sediment. The plots of X-ray intensities of Cr vs. Pb were linear for the identified particles containing both Cr and Pb in heavy traffic road dust, and the line closely fitted the plots for the three yellow road line marking samples. Individual particles were then classified using cluster analysis of element components. The results revealed that the adsorption of source materials or released metals onto soil minerals occurred in road dust and soakaway sediment, that the yellow road line markings were sources of Cr and Pb in heavy traffic road dust, and that materials containing Fe as a major component, such as stainless steel, were additional sources of Cr in both road dust and soakaway sediment.