Trace metal concentrations in tidal flat coastal sediments, Yamaguchi Prefecture, southwest Japan

Geochemical investigations of tidal flat coastal sediments at Ogori, Ozuki, and Kasado in Yamaguchi Bay of southwest Japan were conducted to determine their metal concentrations and to assess contamination levels, compared with sediment quality guidelines (SQG) and several pollutant indicators. Selected major oxides, trace elements, and total sulfur (TS) were determined by X-ray fluorescence. pH values of most samples were alkaline, indicating anoxic conditions. Average abundances of As, Pb, Zn, Cu, Ni, and Cr in Ozuki sediments were 11, 27, 109, 21, 19, and 52 mg/kg, respectively, compared to 9, 29, 80, 16, 18, and 42 mg/kg at Ogori and 12, 27, 151, 34, 30 and 80 mg/kg at Kasado, respectively. Average concentrations of As, Zn, and Cu in all samples and TiO(2), Fe(2)O(3), and P(2)O(5) at Kasado were greater than those of the upper continental crust. Contamination levels were assessed based on SQG, contamination factors (CF), pollution load index (PLI), enrichment factor (EF), and index of geoaccumulation (Igeo). According to the SQG of the US EPA, the sediments were heavily polluted with respect to As, whereas Zn, Cu, Ni, and Cr were classed as moderately polluted. The elevated CF values of As, Pb, and Zn identify moderate to considerable contamination, indicating that these metals are potentially toxic in the study area. Based on PLI and EF, the study sites are moderate to moderately severe polluted with As and Pb, moderately polluted with Zn, and weakly contaminated to noncontaminated with Cu, Ni, and Cr. The highest Igeo values for As, Pb, and Zn in the surface and core sediments reflected the tendency of metal contamination that seems to be related to their fine-grained nature, organic matter-rich sediments, and anthropogenic point sources. Trace metal contents were strongly correlated with Fe(2)O(3) and TiO(2), suggesting that Fe oxyhydroxides and detrital clastic load play a role in controlling abundances in the study area.     

Development of plastic disks containing flame retardants for elucidating changes in their concentrations due to simulated weathering and the application of these disks to weathering tests

Flame retardants (FRs) are useful because they can prevent combustion and delay the spread of fire after the ignition on commercial products containing plastics. However, such commercial products could be a primary source of environmental contamination with FRs. Plastic disks containing FRs were prepared to elucidate changes in the concentrations of the FRs after weathering tests. Acrylonitrile-butadiene-styrene (ABS) and polycarbonate (PC) resin were separately kneaded with a combination of three organic FRs [Dechlorane plus (DP), tetrabromobisphenol A (TBBPA), and triphenyl phosphate (TPhP)] and one inorganic FR [antimony trioxide (Sb₂O₃)]. The concentrations of TBBPA/TPhP and DP/Sb₂O₃ in the final preparations were respectively 1000 and 500 mg/kg in compliance with the RoHS directive on organobromine FR. The concentrations of elements in the final preparations were 300 mg/kg for chlorine, 600 mg/kg for bromine, 100 mg/kg for phosphorus, and 400 mg/kg for antimony, respectively. The analytical concentrations (three FRs and four elements) were consistent with the expected concentrations (maximum difference ?9.5% in the PC disks). The FRs and elements in the disks were sufficiently homogenous (maximum inhomogeneity 4.3% in the PC disks). The prepared disks were subjected to weathering tests; the concentrations of TBBPA in the disks decreased significantly (30 to 40%) whereas the concentrations of the elements did not change under the condition of this study. On the other hand, there were no drastic differences on relationships of FRs and elements such as DP/chlorine and TPhP/phosphorus.     

Safety management by use of laser mass spectrometry of polychlorinated biphenyls (PCBs) in the processed gas and work environment of a PCB disposal plant

This study demonstrates the applicability of laser mass spectrometry for safety management of the processed gas and the work environment in a polychlorinated biphenyl (PCB) disposal plant. By utilization of laser ionization/ion trapping storage/time-of-flight mass spectrometry (LI-IT-TOFMS), we analyzed gaseous PCBs from scrap capacitors with on-line detection. It was confirmed that few contaminants were detected in the spectrum. By the effect of laser-induced selective ionization, it was considered that there was little interference with the mass range of PCBs. The accuracy of LI-IT-TOFMS when analyzing environmental gas was almost the same as that for the PCB standard gas. It was possible to perform on-line analysis of the work environment for over 2000 h (120 000 data points). LI-IT-TOFMS was thus shown to be a very useful method for ensuring the safety of the work environment in disposal plants for PCBs.     

Blooming of Microcystis aeruginosa in the reservoir of the reclaimed land and discharge of microcystins to Isahaya Bay (Japan)

Purpose

In the reservoir created in the reclaimed land in Isahaya Bay, Japan, Microcystis aeruginosa, which produces microcystins (MCs), bloomed every year, and the water with high levels of MCs in the reservoir has been often drained to Isahaya Bay to adjust the water level. The principal aims of this study are to clarify the water conditions suitable for blooming of M. aeruginosa in the reservoir, to follow the amount of distribution of MCs inside and outside the reservoir, and to discuss how blooming of M. aeruginosa is controlled in the reservoir and how MCs produced by Microcystis spread or accumulate in the aquatic environment.

Method

We monitored the water quality (temperature, salinity, dissolved inorganic nitrogen (DIN), and dissolved inorganic phosphorus) in the reservoir with seasonal blooming of microalgae including phytoplankton and M. aeruginosa using the concentrations of chlorophyll ?? and MCs, respectively, and collected the surface sediment in the reservoir and the bay to determine the MC content using the ELISA method.

Result

M. aeruginosa bloomed in extremely low DIN conditions of the water in warm seasons (spring and late summer to autumn). The year-mean standing stock of MCs was approximately 34.5?kg in the water and 8.4?kg in the surface sediment in the reservoir. Approximately 64.5?kg of MCs was discharged with the effluent to the bay in a year.

Conclusion

Since a large amount of MCs always suspends in the water in the reservoir and it has been discharged to the bay, suspension-feeding animals are exposed most seriously to the high levels of MCs occurring in these areas. We need to pay attention to the danger of widespread dispersal of MCs and biological concentration of MCs by fish and clam inside and outside the reservoir.     

Preparation and Use of Spatially and Temporally Resolved Emission Inventories in the San Francisco Bay Region

Three regional agencies recently prepared an Air Quality Maintenance Plan for the San Francisco Bay Area oxidant problem. An Eulerian, photochemical model, LIRAQ, provided the technical basis for the plan recommendations. A major LIRAQ input is an emission inventory accurately resolved to one kilometer and one hour increments. The cooperating agencies prepared such inventories, covering 20,000 sq km, for one base and two future years. Several manual and computer-assisted techniques were developed to utilize a variety of independent data bases. Population, land use, employment and transportation data were oganized into a common system of coordinates and units to produce the needed spatial input. Estimates of hourly variation were made by source category based on production rates, fuel use, traffic patterns, flight schedules, and other factors. The result was a series of consistent, detailed inventories which provide a powerful air quality modeling and planning tool. The detail is attained at considerable expense, but the cost is easily justifiable when compared to implementation costs for control strategies.     

Synergy of ozonation and photocatalysis to mineralize low concentration 2,4-dichlorophenoxyacetic acid in aqueous solution

Concentration of 2,4-dichlorophenoxyacetic acid (2,4-D) may affect its degradation kinetics in advanced oxidation systems, and combinations of two or more systems can be more effective for its mineralization at low concentration levels. Degradations and mineralizations of 0.045mM 2,4-D using O(3), O(3)/UV, UV/TiO(2) and O(3)/UV/TiO(2) systems were compared, and influence of reaction temperature on the mineralization in O(3)/UV/TiO(2) system was investigated. 2,4-D degradations by O(3), O(3)/UV and UV/TiO(2) systems were similar to the results of earlier investigations with higher 2,4-D concentrations. The degradations and total organic carbon (TOC) removals in the four systems were well described by the first-order reaction kinetics. The degradation and removal were greatly enhanced in O(3)/UV/TiO(2) system, and further enhancements were observed with larger O(3) supplies. The enhancements were attributed to hydroxyl radical (()OH) generation from more than one reaction pathway. The degradation and removal in O(3)/UV/TiO(2) system were very efficient with reaction temperature fixed at 20 degrees C. It was suspected that reaction temperature might have influenced ()OH generation in the system, which needs further attention.     

Evaluation of light-duty vehicle mobile source regulations on ozone concentration trends in 2018 and 2030 in the western and eastern United States

To improve U.S. air quality, there are many regulations on-the-way (OTW) and on-the-books (OTB), including mobile source California Low Emission Vehicle third generation (LEV III) and federal Tier 3 standards. This study explores the effects of those regulations by using the U.S. Environmental Protection Agency's (EPA) Community Multiscale Air Quality (CMAQ) model for 8-hr ozone concentrations in the western and eastern United States in the years 2018 and 2030 during a month with typical high ozone concentrations, July. Alterations in pollutant emissions can be due to technological improvements, regulatory amendments, and changes in growth. In order to project emission rates for future years, the impacts of all of these factors were estimated. This study emphasizes the potential light-duty vehicle emission changes by year to predict ozone levels. The results of this study show that most areas have decreases in 8-hr ozone concentrations in the year 2030, although there are some areas with increased concentrations. Additionally, there are areas with 8-hr ozone concentrations greater than the current U.S. National Ambient Air Quality Standard level, which is 75 ppb.

Implications:

To improve U.S. air quality, many regulations are on the way and on the books, including mobile source California LEV III and federal Tier 3 standards. This study explores the effects of those regulations for 8-hr ozone concentrations in the western and eastern United States in the years 2018 and 2030. The results of this study show that most areas have decreases in 8-hr ozone concentrations in 2030, although there are some areas with increased concentrations. Additionally, there are areas with 8-hr ozone concentrations greater than the current U.S. National Ambient Air Quality Standard level.     

Evaluating waste disposal systems

Waste disposal systems conventionally exhibit many problems, such as difficulties in finding final disposal sites for incinerator residues and the issue of how to recycle waste materials. Some new technologies have been developed to solve such problems, including ash melting and gasification melting. Furthermore, to improve the power generation efficiency of waste treatment facilities so that their energy is used more efficiently, combined stoker/gas turbine power generation (super waste power generation) technology has been developed. Through examination of two cases in this study, environmental impacts and costs were determined using lifecycle assessment (LCA) and lifecycle cost (LCC) methods in a model city. In case 1, a stoker furnace was compared to a combined stoker/gas turbine system. In case 2, a stoker furnace plus ash melting system was compared to a gasification melting system. The results demonstrate that the stoker furnace has a lower environmental impact than the combined stoker/gas turbine system in case 1, and that the stoker plus ash melting system costs less than the gasification melting system in case 2, but both systems had strong impacts on the environment.     

Horizontal distribution of steroid estrogens in surface sediments in Tokyo Bay

A monitoring survey was conducted to investigate the distribution of steroid estrogens and their conjugates in surface sediments of Tokyo Bay for the first time, which is known as one of the most heavily polluted marine embayments in the world. The surface sediment samples were collected at 20 locations covering the whole area of Tokyo Bay and analyzed for steroid estrogens and their conjugates using liquid chromatography-tandem mass spectrometry. The concentrations of 17beta-estradiol (beta-E2) and estrone (E1) ranged from ND (below the detection limit; <0.07) to 0.59 and from 0.05 to 3.60 ng g-1 dry, respectively. Those concentrations were higher in the northern part of the bay, which is directly receiving huge quantities of pollutants from adjacent rivers containing a large amount of municipal and industrial wastewater. 17alpha-Estradiol (alpha-E2) and estrone-3-sulfate (E1-3S) were detected in some of the samples, whereas neither of the other conjugates, estriol (E3) or 17alpha-ethynylestradiol (EE2), was found.     

Discriminatory tax and subsidy on environmental behaviors

Environmental Economics and Policy Studies - This paper investigates the consumption tax and subsidy as an environmental policy instrument for environmentally aware consumers by applying the model...