Methane dehydroaromatization over Mo-modified H-MFI for gas to liquid catalysts

For direct gas to liquid (GTL),a novel process producing energy sources for methane dehydroaromatization is needed.Supporting MoO3 on H-MFI zeolite shows the high catalytic capacity and a selective activity for dehydroaromatization of methane to benzene at 973 K in a fixed bed reactor.On the other hand,deactivation by coke on the active sites in all the catalysts is formed during the reaction.H2 co-feed suppressed the deactivation,which is probably due to the decrease in coking amount.Mo K-edge X-ray absorption fine structure (XAFS) results showed the formation of dispersed Mo2C species with low crystallinity after dehydroaromatization.Mo L-edge XANES (X-ray absorption near-edge structure) indicated the formation of active Mo species including Mo2C and Mo-oxycarbide (MoOxCy),where the red-ox state should be independent in the absence/presence of H2.It is concluded that Mo-oxycarbide species act as highly active species,and their stability affected the durable activity in the presence of H2.     

Field study of nitrous oxide production with in situ aeration in a closed landfill site

Nitrous oxide (N₂O) has gained considerable attention as a contributor to global warming and depilation of stratospheric ozone layer. Landfill is one of the high emitters of greenhouse gas such as methane and N₂O during the biodegradation of solid waste. Landfill aeration has been attracted increasing attention worldwide for fast, controlled and sustainable conversion of landfills into a biological stabilized condition, however landfill aeration impel N₂O emission with ammonia removal. N₂O originates from the biodegradation, or the combustion of nitrogen-containing solid waste during the microbial process of nitrification and denitrification. During these two processes, formation of N₂O as a by-product from nitrification, or as an intermediate product of denitrification. In this study, air was injected into a closed landfill site and investigated the major N₂O production factors and correlations established between them. The in-situ aeration experiment was carried out by three sets of gas collection pipes along with temperature probes were installed at three different distances of one, two and three meter away from the aeration point; named points A-C, respectively. Each set of pipes consisted of three different pipes at three different depths of 0.0, 0.75 and 1.5 m from the bottom of the cover soil. Landfill gases composition was monitored weekly and gas samples were collected for analysis of nitrous oxide concentrations. It was evaluated that temperatures within the range of 30–40°C with high oxygen content led to higher generation of nitrous oxide with high aeration rate. Lower O₂ content can infuse N₂O production during nitrification and high O₂ inhibit denitrification which would affect N₂O production. The findings provide insights concerning the production potentials of N₂O in an aerated landfill that may help to minimize with appropriate control of the operational parameters and biological reactions of N turnover.

Implications: Investigation of nitrous oxide production potential during in situ aeration in an old landfill site revealed that increased temperatures and oxygen content inside the landfill site are potential factors for nitrous oxide production. Temperatures within the range of optimum nitrification process (30–40°C) induce nitrous oxide formation with high oxygen concentration as a by-product of nitrogen turnover. Decrease of oxygen content during nitrification leads increase of nitrous oxide production, while temperatures above 40°C with moderate and/or low oxygen content inhibit nitrous oxide generation.     

A copula-based inference to piecewise exponential models under dependent censoring,with application to time to metamorphosis of salamander larvae

In ecology and evolutionary biology, controlled animal experiments are often conducted to measure time to metamorphosis which is possibly censored by the competing risk of death and the follow-up end. This paper considers the problem of estimating the survival function of time-to-event when it is subject to dependent censoring. When the censorship is due to competing risks, the traditional assumption of independent censorship may not be satisfied, and hence, the usual application of the Kaplan–Meier estimator yields a biased estimation for the survival function of the event time. This paper follows an assumed copula approach (Zheng and Klein in Biometrika 82(1):127–138, 1995) to adjust for dependence between the event time of interest and the competing event time. While the literature on an assumed copula approach has mostly focused on semiparametric settings, we alternatively consider a parametric approach with piecewise exponential models for fitting the survival function. We develop maximum likelihood estimation under the piecewise exponential models with an assumed copula. A goodness-of-fit procedure is also developed, which touches upon the identifiability issue of the copula. We conduct simulations to examine the performance of the proposed method and compare it with an existing semiparametric method. The method is applied to real data analysis on time to metamorphosis for salamander larvae living in Hokkaido, Japan (Michimae et al. in Evol Ecol Res 16:617–629, 2014).     

Factors which affect the occurrence of cannibalism and the broad-headed "cannibal" morph in larvae of the salamander Hynobius retardatus

Cannibalism in amphibian larvae may be suppressed among siblings in comparison to distant relatives or nonkin, even when a "cannibal" morph that can consume conspecifics shows adaptive advantages. Two experimental studies were undertaken to analyze factors which affect the frequency of cannibalism and the occurrence of the broad-headed "cannibal" morph in larvae of the salamander Hynobius retardatus. The first experiment investigated whether or not the broad-headed "cannibal" morph is only induced after performing cannibalism. Because the broad-headed "cannibal" morph was observed in larval populations that showed no cannibalism, it was concluded that the "cannibal" morph could be induced without actual cannibalism. Second, possible factors affecting the occurrence of the broad-headed "cannibal" morph were analyzed with respect to the density of larvae, level of food supply, and kinship among larvae, alone or in combination. Appearance of the broad-headed "cannibal" morph was affected by interactive effects of density2kinship: although the morph was induced significantly more often at a higher density if the conspecifics were distantly or not related, it was strongly suppressed even at high density if larval kinship was very close or among siblings. In contrast, the frequency of cannibalism was independently affected by larval density, level of food supply, and kinship among larvae: it was significantly larger at high than at low larval densities, at low than at high food supply, and in mixed-sibling groups than in pure sibships. These results suggest that the "cannibal" morphs in H. retardatus are induced even without cannibalism at a high density of conspecifics in mixed-sibling groups, but the occurrence of this morph, which continuously consumes conspecifics, is suppressed among siblings.     

Plant induced changes in concentrations of caesium, strontium and uranium in soil solution with reference to major ions and dissolved organic matter

For a better understanding of the soil-to-plant transfer of radionuclides, their behavior in the soil solution should be elucidated, especially at the interface between plant roots and soil particles, where conditions differ greatly from the bulk soil because of plant activity. This study determined the concentration of stable Cs and Sr, and U in the soil solution, under plant growing conditions. The leafy vegetable komatsuna (Brassica rapa L.) was cultivated for 26 days in pots, where the rhizosphere soil was separated from the non-rhizosphere soil by a nylon net screen. The concentrations of Cs and Sr in the rhizosphere soil solution decreased with time, and were controlled by K+NH(4)(+) and Ca, respectively. On the other hand, the concentration of U in the rhizosphere soil solution increased with time, and was related to the changes of DOC; however, this relationship was different between the rhizosphere and non-rhizosphere soil.     

3R strategies for the establishment of an international sound material-cycle society

Focusing on the promotion of the “3Rs” – reduce, reuse, and recycle – the authors summarize the policy that Japan has evolved in waste management and recycling policy over the years. To realize an international sound material-cycle society (SMS), the 3R approaches should first be implemented in each individual country. After each country has established an SMS to the best of its ability, contribution toward reducing the environmental load internationally, especially across all of East Asia, will be achieved by having waste and recyclable resources that cannot be handled in one country effectively used or processed in other countries. The current situation of international resource circulation is described and a concept of SMS at an international level is proposed. The views expressed herein are those of the authors and are not necessarily the official views of the organizations with which the authors are affiliated.     

Emission inventory of deca-brominated diphenyl ether (DBDE) in Japan

Atmospheric emissions of deca-brominated diphenyl ether (DBDE) in Japan were estimated based on the material flow of DBDE products and their emission factors. In 2002, the demand for DBDE in Japan was 2200 ton/year and the stock level was about 60 000 ton. The DBDE flow into the waste stream was estimated to be about 6000 ton/year and the flow out through second-hand product exports was more than 700 ton/year. Home appliance recycling facilities dismantle and crush domestic wastes containing about 600 ton of DBDE annually. Material recycling of crushed plastics is not commonly practiced as yet. Emission factors from plastics processing (2 × 10⁻⁹–1 × 10⁻⁷), textile processing (9 × 10⁻⁷), home appliance recycling (8 × 10⁻⁹–5 × 10⁻⁶), and waste incineration (1 × 10⁻⁷–2 × 10⁻⁶) were estimated using field measurement data. The DBDE emission rate through house dust during the service life of final products (2 × 10⁻⁷–9 × 10⁻⁷ per year) was estimated using the DBDE concentration in dust and the amount of dust in used televisions. Emission factors from previous studies were also used. The estimated total DBDE emission was 170–1800 kg/year. These results suggest the necessity of characterizing emissions during the service life of products, which is essential information for formulating an appropriate e-waste recycling strategy.     

Removal of fluoride by effectively using spent cation exchange resin

Journal of Material Cycles and Waste Management - Spent strongly acidic cation exchange resin was effectively used for the removal of trace concentration of fluoride ions. For this purpose, the...     

Impact and effectiveness of Bio-Coke conversion from biomass waste as alternative source of coal coke in Southeast Asia

Journal of Material Cycles and Waste Management - Growing concern over fossil fuel depletion and the environmental impact of greenhouse gases have driven the demand for solid biofuel energy as an...     

Current results and future perspectives for Japanese recycling of home electrical appliances

The Japanese system of recycling home electrical appliances has several unique aspects, including (1) a limited number of target appliances, (2) a recycling fee system that requires consumers to pay a recycling fee at the time of disposal, and (3) a direct recycling obligation for manufacturers, who have a physical, rather than a financial, responsibility for their end-of-life products. We studied data from 2001 to 2007 and found that the amount of four specified home electrical appliances and their materials that was recycled increased from about 319,249 tonnes in 2001 to about 447,262 tonnes—or 3.5 kg per inhabitant—in 2006. Recycling yield and development of recycling technologies have also improved. New recycling technologies have enabled a higher rate of material recycling of plastics (i.e., a closed-loop recycling). Improved eco-design, such as design for easier disassembly, has been promoted, and the higher quality of discarded appliances has enhanced the reuse market. Hazardous substances and fluorocarbons are being well managed. Problems with the recycling system include inelastic recycling fees, illegal dumping, illegal transfer by retailers, and the limited number of target appliances. Recycling fees could be reduced; this move might reduce the incidence of illegal dumping, as would engage stakeholders in collaborative efforts against illegal dumping. Illegal transfers could be reduced by improved traceability for retailers. Products such as liquid crystal displays, plasma display panels and clothes dryers have become increasingly common and should be also be targeted for recycling.