Studies on automated survey system of environmental chemicals by gas chromatography-mass spectrometry-computer III. Construction of an automated survey system and its application

An automated survey system on the chemicals in environments by a gas chromatography-mass spectrometry-computer system has been constructed of Three Dimensional Mass Chromatography, Modified Probability Based Matching method, and Self Training Interpretive and Retrieval method. And it was applied to analyze environmental materials, with interesting results.     

A comparative evaluation of wet digestion and dry ashing methods for the determination of some major and minor nutrients in composted manure

The analytical results of 53 manure samples determined by wet digestion and dry ashing procedures were compared in order to evaluate their relative suitability for recovering different nutrient elements in manure and manure compost. Wet digestion recovered greater amounts of phosphorus (P), potassium (K), calcium (Ca), manganese (Mn), and zinc (Zn) in more samples than dry ashing. Nutrient contents in the samples were highly variable, with coefficients of variation (CV) ranging from 38% for magnesium (Mg) to 161% for copper (Cu) analyzed by the wet digestion procedure, and from 47% to 138% for Mg and Cu analyzed by the dry ashing procedure. The mean values of P, K, Ca, Mn, and Zn averaged for the 53 samples were significantly higher using wet digestion than dry ashing procedure, but both procedures recovered comparable amounts of iorn (Fe), Mg, and Cu. Correlations analysis between both procedures for each element showed reasonable to fair agreements for Ca (R ²?=?0.93), K (R ²?=?0.93), P (R ²?=?0.90), Mg (R ²?=?0.84), Fe (R ²?=?0.87), Mn (R ²?=?0.73), and Cu (R ²?=?0.66), but poor agreement for Zn (R ²?=?0.44). The low agreement between procedures for Zn suggests that wet digestion, which gave a higher recovery, should be a preferred procedure for analyzing Zn in manures.     

Amelioration effect of humic acid extracted from solubilized excess sludge on saline-alkali soil

In this study, the main characteristics and soil amendment effects on the saline–alkali soil of humic acid extracted from solubilized excess sludge (SS-HA) were investigated. The excess sludge was solubilized prior to extraction to improve the humic acid recovery rate. The structural features of SS-HA were characterized by an elemental analysis, Fourier transform infrared spectroscopy, and ¹H-nuclear magnetic resonance spectroscopy, and compared with those of HA extracted from non-solubilized excess sludge (ES-HA). The results showed that extraction efficiency of humic acid was enhanced by using solubilization, although structural properties of humic acid extracted from solubilized excess sludge were almost the same as those of ES-HA. To study a utilization method of SS-HA, the soil amendment effects on saline–alkali soil by mixture of SS-HA were investigated with a model soil-column experiment. SS-HA reduced the pH of the saline–alkali soil, and the effect was immediately observed or faster than the case in which only peat is added. Moreover, the cation exchangeable capacity of the saline–alkali soil was enhanced by addition of SS-HA.     

Estimation of municipal solid waste generation and landfill area in Asian developing countries

In developing Asian countries, the municipal cooperations are unable to handle the increasing amount of municipal solid waste, which into the uncollected waste being spread on roads and in other public areas leading to tremendous pollution and destruction of land and negative impact on human health. Generation of municipal solid waste increases with the rapid urbanization and accelerated economic development with in the rapidly growing advanced technological societies. The nature of municipal solid waste is a term usually applied to a heterogeneous collection group of waste produced in urban areas, the nature of which varies from region to region. The common problem faced by all developing Asian countries, is the disposal of municipal solid waste and availability of land fill site area. Present study explains the correlation analysis of among different factors of municipal solid waste and the objective is to assess the future municipal solid waste stream in Asian developing countries. The other goal of this study was to calculate the future land area that would be required for landfill site disposal in Asian developing countries.     

Improved method for the formation of recycled resins from depolymerized products of waste fiber-reinforced plastics: simple and effective purification of recovered monomers by washing with water

The synthesis of recycled plastics from recovered monomeric materials obtained from the depolymerization reaction of fiber-reinforced plastics (FRP) was examined. The depolymerization reaction of FRP in the presence of N,N-dimethylaminopyridine (DMAP) smoothly yielded the corresponding monomers, which mainly consisted of dimethyl phthalates. The polymerization reaction with this monomer failed to form the corresponding unsaturated polyesters due to contamination by N-methyl-4-pyridone, a decomposition product of DMAP. An efficient purification of the recovered monomer was achieved by washing with water, and the purified monomer successfully yielded the corresponding polymers. A hardness test revealed that the polymers were as hard as the polyester made from virgin materials. The present modification provides a practical method for the preparation of recycled plastics from depolymerized plastics.     

210Pb deposition in the far East Asia: controlling factors of its spatial and temporal variations

In order to better understand the behavior of ²¹⁰Pb deposition in Far East Asia, comprehensive data of monthly ²¹⁰Pb deposition, which includes several time-series and spatial distribution data at 14 stations in Japan and 2 stations in Taiwan, were analyzed. Pb-210 deposition at most of the sites exhibited a typical seasonal change with higher values in winter and lower values in summer; especially, the greatest ²¹⁰Pb deposition in the world occurred in winter at sites beside the Japan Sea. The deposition behavior of ²¹⁰Pb in Far East Asia differed between winter and summer. The meteorological phenomenon peculiar to winter of the Japan Sea side, i.e., formation of the Japan Sea convergence zone, might cause the high ²¹⁰Pb concentration in rainwater, as may heavy snowfall. The ²¹⁰Pb concentration in rainwater showed long-term variability, although this differed between winter and summer. This long-term variability may be related to climatological factors such as El Niño.     

The simulation of long-range transport of ¹³⁷Cs from East Asia to Japan in 2002 and 2006

To evaluate the quantities of ¹³⁷Cs from past nuclear tests being transported to and deposited in Japan by naturally-occurring phenomena, the authors developed long-range transport models for ¹³⁷Cs considering Asian dust. The simulation using these models backed the observed recent increase of ¹³⁷Cs deposition along the coast of the Sea of Japan in early spring. For the sake of public safety, it is vital to ascertain whether an increase of radioactive deposition is caused by natural phenomena or a nuclear accident. The observations in recent years have suggested that dust and soil containing ¹³⁷Cs is transported from the regions around Inner Mongolia to Japan by the wind. In this paper, using observation data from the early spring of 2002 and 2006, the authors have found good agreement between the simulations and the measurements. The simulations reproduced the entrainment of ¹³⁷Cs and subsequent transport to Japan caused by strong winds associated with low pressure areas around the Inner Mongolian grasslands. The most likely cause of high-level ¹³⁷Cs deposition over northern Japan during March 2002 was ¹³⁷Cs associated with particles transported at low-altitude (1 km) and subjected to precipitation on the 22nd to 24th.     

Influence of the Hydrothermal Pre-treatments on the Adsorption Characteristics of Activated Carbons from Woods

The hydrothermal treatments were conducted prior to the carbonization of oak woods and the obtained charcoals were activated using carbon dioxide or water vapor. The hydrothermal treatments brought about the elutions of acid-soluble lignin fractions as well as hemicellulose fractions accompanied with the decomposition of lignin carbohydrate complexes in the cell walls, which lowered not only the carbon yield of charcoal but also the crystal parameters for the carbon crystallites. However, the activated carbons (AC) produced via the hydrothermal pre-treatment showed superior adsorption properties especially for the adsorptions of 2-methylisoborneol and geosmin as compared with the untreated commercial AC. The hydrothermal treatments prior to the carbonization have some potential to increase the fractions of meso-pores effective for the adsorption of globular shaped molecules.     

Molecular taxonomy of vestimentiferans of the western Pacific and their phylogenetic relationship to species of the eastern Pacific. I. Family Lamellibrachiidae

Phylogenetic relationships among vestimentiferans in the family Lamellibrachiidae collected from ten sites in the western Pacific were analyzed on the basis of the nucleotide sequence of part of a mitochondrial gene for cytochrome oxidase I. The 103 individuals analyzed were tentatively classified into five species: namely, Lamellibrachia satsuma, three tentative species inhabiting Japanese waters and one tentative species from the Manus Basin. Phylogenetic analysis of the four tentative species, L. satsuma, and two lamellibrachiids, whose sequences had been reported previously, namely L. columna from the Lau Basin and L. barhami from the Oregon Margin and the Middle Valley, revealed that the lamellibrachiids from Japanese waters were not monophyletic. While two tentative species from Japanese waters and L. columna formed a monophyletic group, the other tentative species from Japanese waters was closely related to the tentative species from the Manus Basin. L. satsuma was shown to be phylogenetically distinct from other lamellibrachiids of the western Pacific. A lamellibrachiid that had been collected from the Nikko Seamount was also demonstrated to be L. sastuma.     

PCB decomposition and formation in thermal treatment plant equipment

In this study we investigated both the decomposition and unintentional formation of polychlorinated biphenyl congeners during combustion experiments of refuse-derived fuel (RDF) and automobile shredder residue (ASR) at several stages in thermal treatment plant equipment composed of a primary combustion chamber, a secondary combustion chamber, and other equipments for flue gas treatment. In both experiments, the unintentional formation of PCB occurred in the primary combustion chamber at the same time as the decomposition of PCB in input samples. By combusting RDF, non-ortho-PCB predominantly formed, whereas ortho-PCB and symmetric chlorinated biphenyls (e.g., #52/69, #87/108, and #151) tended to be decomposed. ASR formed the higher chlorinated biphenyls more than RDF. These by-products from ASR had no structural relation with ortho-chlorine. Lower chlorinated biphenyls appeared as predominant homologues at the final exit site, while all congeners from lower to higher chlorinated PCB were unintentionally formed as by-products in the primary combustion chamber. This result showed that the flue gas treatment equipments effectively removed higher chlorinated PCB. Input marker congeners of RDF were #11, #39, and #68, while those for ASR were #11, #101, #110/120, and #118. Otherwise, combustion marker congeners of RDF were #13/12, #35, #77, and #126, while those for ASR were #170, #194, #206, and #209. While the concentration of PCB increased significantly in the primary combustion chamber, the value of toxicity equivalency quantity for dioxin-like PCB decreased in the secondary combustion chamber and the flue gas treatment equipments.