Dry and wet deposition of water-insoluble dust and water-soluble chemical species during spring 2007 in Tsukuba,Japan

Dry and wet depositions were sampled daily in Tsukuba, Japan, in spring 2007. Temporal variations in the dry and wet deposition fluxes of dust and water-soluble chemical species were controlled largely by air mass origin, the water vapor mixing ratio, and Asian dust events. The contribution of local sources to dry deposition of dust was large when the wind speed was high. Dry deposition fluxes of water-soluble chemical species were larger in humid air masses than in dry air masses. Wet deposition fluxes of dust and water-soluble chemical species indicated that air masses that passed over dust source regions and industrial regions became mixed with the maritime air masses over the coastal site of the Asian continent and western part of the Japanese islands. The total deposition of dust was 4220 mg m^?2 month^?1, and that of water-soluble chemical species ranged from 10 to 636 mg m^?2 month^?1. Wet deposition fluxes of the total deposition flux of dust accounted for 72% and those of water-soluble chemical species was for 72–96%. In particular, the largest wet deposition occurred during a single Asian dust event on 3 April. This event accounted for 23% (950 mg m^?2 month^?1) of the monthly dust deposition flux and for 2–28% (0.43–51 mg m^?2 month^?1) of the monthly deposition flux of water-soluble chemical species. This result implies that the wet deposition flux associated with even one sporadic Asian dust event can have extensive impacts on both terrestrial and oceanic ecosystems in East Asia.     

Decomposing detonation and deflagration properties of ozone/oxygen mixtures

In this study, the decomposing detonation and deflagration properties of ozone/oxygen mixtures of up to 20 vol.% of ozone in oxygen under high pressure of up to 1.0 MPa in a tube were experimentally investigated. The mixtures were ignited by an electric spark at the end of the tube. Flame propagation properties such as flame velocity and pressure were measured with thermocouples and piezo electric transducers mounted along the tube. Slow and constant flame propagation profiles were obtained. We also investigated the quenching ability of a wire gauze as well as the concentration limit for flame propagation. However, in spite of slow flame propagation velocity and easy flame quenching properties under these experimental conditions, direct initiation of detonation by the driver detonation of the stoichiometric oxy-hydrogen mixture was easily achieved at much lower concentrations than the limit of deflagration. The observed detonation properties, such as wave velocity and pressure, agreed fairly well with C–J calculated values. The detonation velocity (900–1200 m/s) and the pressure ratio to initial pressures (5–9.5) were not affected by the initial pressure of the mixtures. Near the detonation limit, typical spinning detonations with oscillatory pressure waves were observed.     

Development of waste gasification and gas reforming system for municipal solid waste (MSW)

To achieve both high-efficiency power generation and high detoxification performance, advanced-type waste power generation plants such as pyrolysis and gas reforming plants are suggested. Further surveys on actual operational data of these plants are required in terms of reliability of the system when it is introduced to waste disposal sites. To verify the technical effectiveness of advanced-type waste power generation using the pyrolysis and gas reforming method, we evaluated 10?tons/day of municipal solid wastes (MSW) treated in a demonstration plant. A demonstration test was conducted over 100?days including 35?consecutive days of operation treating MSWs. The test results show high recycling performance and harmless nature of the plant which proves it to be an excellent waste recycling system. Major test results are as follows: (1) stabilization of waste treatment is possible with the wastes of various qualities, (2) clean gas is produced from the waste whose energy recovery ratio is approximately 40?%. (3) 99.3?% weight % of dried waste are recovered as valuable materials such as clean gas, char and metal, (4) total amount of dioxin emission to the outside of the plant is very small, down to 0.0051–0.018?μg?TEQ per ton waste.     

Metabolism and excretion of orally and intraperitoneally administered trimethylarsine oxide in the hamster

When trimethylarsine oxide (TMAO) was administered orally to hamsters once only, 86.9±11.1% of the administered dose of the compound was exreted in the urine during the following 24 hours: TMAO proved to be an arsenic compound eliminated extremely rapidly. The unchanged form of TMAO was the one and only trimethylarsenic compound (TMA) detected in the urine: in othe words, TMAO proved neither to be demethylated nor to be converted to arsenobetaine. It was shown, on the other hand, that TMAO is partly reduced in vivo and that only trimethylarsine was detected in expired air.     

Effects of buoyancy, transparency and zooplankton feeding on surface maxima and deep maxima: Comprehensive mathematical model for vertical distribution in cyanobacterial biomass

Inhomogeneous vertical distributions of the cyanobacterial biomass are widely observed during the summer season in stratified lake ecosystems. Among these are surface maxima characterized by surface scum formation and deep or subsurface maxima also known as deep chlorophyll maxima (DCM). The former occurs at the epilimnion in eutrophic lakes, and are usually caused by colonial cyanobacteria such as Microcystis. On the other hand, the latter occurs at the metalimnion and the upper part of the hypolimnion near the thermocline in oligotrophic lakes, and are referred to filamentous cyanobacteria such as Oscillatoria. The aim of this paper is to present a simple mathematical model that can simultaneously describe these phenomena including the annual and diurnal variations, emphasizing the roles of buoyancy regulation, transparency of the lake and zooplankton feeding on cyanobacteria. According to our computer analyses, the increased buoyancy, the low clarity of the lake and the low rate of zooplankton feeding take significant roles in formation of surface maxima, while the reversal of these factors makes deep maxima predominant. Our two-component model with nutrients and cyanobacteria can distinguish between two phenomena by changing the parameters for these factors, without altering the model itself.     

Population maintenance of the short-lived shrub Sambucus in a deciduous forest

This study quantitatively clarifies the life history of a shrub, Sambucus racemosa ssp. sieboldiana, in an old-growth forest, the Ogawa Forest Reserve, Japan, by a demographic approach using a projection matrix model that incorporates interactions between demographic parameters and canopy height dynamics. S. racemosa is a common deciduous shrub in central Japan and is known to grow predominantly at forest edges or roadsides. This indicates that it is a highly light-demanding species, and occurrence in gaps in old-growth stands suggests its "fugitive," gap-dependent life history in old-growth forests. We found that one distinctive feature of this species was that its seedlings can survive well in shaded conditions by alternating stems every year like perennial herb species. Matrix model analyses demonstrated that S. racemosa can continuously regenerate under the present disturbance regime of this forest and is highly adaptable to the structural dynamics of the old-growth forest. The maturity of S. racemosa shrubs depends on their size, and nearly all (>90%) of the mature (reproducing) individuals were found in gaps or near gaps. But wide seed dispersal by birds and the ability to form both seed banks and seedling banks, the latter of which has been regarded as a common characteristic of shade-tolerant climax species, probably increase the species' chances to encounter canopy gaps. Dynamic-canopied matrix models showed that the greatest elasticity is with shaded seedling survival. The frequent stem alternation of shaded seedlings often makes the growth rate negative, but the survival rate of seedlings in low light awaiting new gap creation is remarkably high (0.93 yr(-1)). The lower survival rate of the larger individuals and smaller minimum size to start reproduction than other canopy or subcanopy shade-tolerant species indicate that S. racemosa has the potential to reproduce before the closure of the encountered gaps and to complete its life history rapidly.     

Development of extraction method of pharmaceuticals and their occurrences found in Japanese wastewater treatment plants

In this study, occurrence of 66 PPCPs (pharmaceuticals and personal care products) in liquid and solid phases of sewage sludge was elucidated. The extraction methods for the PPCPs from sludge were newly developed employing Pressurized Liquid Extraction (PLE) and Ultrasonic Solvent Extraction (USE). As an appropriate method, PLE using water (pH2), PLE using methanol (pH4), and USE using mixture of methanol and water (1/9,v/v, pH11) was found most effective because total recovery of most of the PPCPs indicated 40 to 130%. The developed extraction method with previously developed method for liquid phase analysis was applied to field survey at wastewater treatment plants (WWTPs) in Japan. 56 compounds were detected from the primary sludge and 61 compounds were detected from the excess sludge. The concentration was ranged between several ng/g and several μg/g. Solid-water distribution coefficient (Log K_d) ranged between 0.9 L/kg (Caffeine) and 3.7 L/kg (Levofloxacin) for primary sludge and between 1.4 L/kg (Sulpirid) and 4.3 L/kg (Mefenamic acid) for excess sludge.     

Simultaneous determination of seven anticoagulant rodenticides in agricultural products by gel permeation chromatography and liquid chromatography–tandem mass spectrometry

A sensitive and reliable method for the simultaneous determination of hydroxycoumarin-type (brodifacoum, bromadiolone, coumatetralyl, and warfarin) and indandione-type (chlorophacinone, diphacinone, and pindone) rodenticides in agricultural products by gel permeation chromatography (GPC) and liquid chromatography–tandem mass spectrometry (LC–MS/MS) was developed. The procedure involved extraction of the rodenticides from samples with acetone, followed by liquid–liquid partitioning with hexane/ethyl acetate (1:1, v/v) and 10% sodium chloride aqueous solution, then cleanup using GPC, and finally, analysis using LC–MS/MS. High recoveries from the GPC column were obtained for all rodenticides tested using a mobile phase of acetone/cyclohexane/triethylamine (400:1600:1, v/v/v). An ODS column, which contains low levels of metal impurities, gave satisfactory peak shapes for both hydroxycoumarin- and indandione-type rodenticides in the LC–MS/MS separation. The average recoveries of rodenticides from eight agricultural foods (apple, eggplant, cabbage, orange, potato, tomato, brown rice, and soybean) fortified at 0.0005–0.001 mg/kg ranged from 76 to 116%, except for bromadiolone in orange (53%) and diphacinone in soybean (54%), and the relative standard deviations ranged from 1 to 16%. The proposed method effectively removed interfering components, such as pigments and lipids, and showed high selectivity. In addition, the matrix effects were negligible for most of the rodenticide/food combinations. The results suggest that the proposed method is reliable and suitable for determining hydroxycoumarin- and indandione-type rodenticides in agricultural products.     

Analysis method for PCBs in reclaimed oil using a fast-GC triple stage quadrupole mass spectrometer with the 13-component quantitation method

It is necessary for companies supplying reclaimed oil to analyze polychlorinated biphenyls (PCBs), because there is a possibility of the presence of contaminants due to trace-level PCBs in the reclaimed oil. However, common analysis methods of PCBs are time-consuming and complicated. Fast-GC triple stage quadrupole mass spectrometer with the 13-component quantitation method is an official method for analyzing PCBs in insulating oil in Japan. This method is extremely fast and simplified. The purpose of this study involves an investigation of the aforementioned fast and simple method for potential use in the analysis of reclaimed oil. Furthermore, it was attempted to combine the method with sample preparation involving only hexane dilution. The effect of sample dilutions corresponding to 100, 300, and 500 times was evaluated for reducing the matrix effect. The matrix effect was suppressed at a dilution ratio equal to or exceeding 300 times. Calibration curves of four points, namely 0.01, 0.05, 0.1, and 0.5 ng/mL, (ignored origin) by using an internal standard method were prepared for the 13 components. The square of regression coefficient (R²) values of all calibration curves exceeded 0.997. This method was adopted for the analysis of reclaimed oil containing 0.5 μg/mL PCBs, which corresponds to the judgment criteria, and accurate quantitation (accuracy value, 94.0–102%) and good repeatability (%RSD, 3.6%) were obtained. Furthermore, the required sensitivity was maintained even when 800 samples were analyzed without a cleaning ion source and an exchanging analysis column.