Use of an ultraviolet light-activated persulfate process to degrade humic substances: effects of wavelength and persulfate dose

Environmental Science and Pollution Research - Natural organic matter (NOM), commonly found in surface and ground waters, form disinfection by-products in drinking water. Generally, advanced...     

Sesquiterpene Hydrocarbons: Kairomones with a releaser effect in the sexual communication of the white-spotted longicorn beetle, <Emphasis Type="Italic">Anoplophora malasiaca</Emphasis> (Thomson) (Coleoptera: Cerambycidae)

Summary.  We conducted a series of experiments with the white-spotted longicorn beetle Anoplophora malasiaca (Thomson), and its host plant, Citrus unshiu, to examine the origin of the sesquiterpene hydrocarbons (SHCs; including β-elemene, β-caryophyllene, α-humulene, α-farnesene, and several unidentified compounds) that are contained in the elytra of the beetles and act as an attractant. In the laboratory, mechanically wounded citrus branches, as well as those fed upon by A. malasiaca, attracted males more frequently than intact branches. Solid phase microextraction (SPME) and subsequent analyses by gas chromatography (GC) analyses detected measurable SHCs from the air around both mechanically wounded and beetle-infested branches, as well as trace amounts from intact branches. The SHCs were also detected for a certain time from beetles that had fed on the citrus branches, but the amounts decreased rapidly after they were removed from the host. This decrease generally corresponded with a reduction of attractiveness of the beetles in a behavioural assay. Isolated females acquired the SHCs after exposure to, but not upon contact with, other females that had fed on C. unshiu branches. We hypothesize that the citrus SHCs are adsorbed in, retained on, and released from the wax layer of the beetle elytra. Since these compounds are released from branches when beetles feed, they may indirectly signal the presence of beetles to others in the field. The high response rate to SHCs by males is likely representing mate searching behavior. The SHCs act as kairomones with a releaser effect in the communication system of A. malasiaca. Hiroe Yasui, Toshiharu Akino, Midori Fukaya: These authors contributed equally to this article.     

Evaluation of an electrolysis apparatus for inactivating antineoplastics in clinical wastewater

We recently reported a system for inactivating antineoplastics in which sodium hypochlorite is supplied by the electrolysis of sodium chloride solution. In this study, we designed an electrolysis apparatus for inactivating the cytotoxicity of antineoplastics in clinical wastewater using the system. The apparatus consists of an electrolysis cell with platinum-iridium electrodes, a pool tank, a circulating system for wastewater, a safety system for explosive gas and overflow, and an exhaust duct. The free chlorine concentration increased linearly up to 6500 mg l(-1), and pH also increased to 9.0-10.0 within 2h, when 0.9% sodium chloride solution was electrolyzed. We examined its efficacy with model and clinical wastewaters. The reciprocal of dilution factor for disappearance of cytotoxicity using Molt-4 cells was compared before and after electrolysis. In the model wastewater, that was 9.10 x 10(4) before electrolysis, and 3.56 x 10(2) after 2h of electrolysis. In the clinical wastewater (n=26), that was 6.90 x 10(3)-1.02 x 10(6) before electrolysis, and 1.08 x 10(2)-1.45 x 10(4) after 2h of electrolysis. Poisonous and explosive gases released by the electrolysis were measured; however, they were found to be negligible in terms of safety. The environmental load was evaluated by carbon dioxide generation as an index and it was found that the carbon dioxide generated by the electrolysis method was 1/70 lower than that by the dilution method with tap water. Moreover, the cost of the electrolysis method was 1/170 lower than that of the dilution method. This method was found to be both effective and economically valuable.     

Phytotoxicities of fluoranthene and phenanthrene deposited on needle surfaces of the evergreen conifer, Japanese red pine (Pinus densiflora Sieb. et Zucc.)

Polycyclic aromatic hydrocarbons (PAHs) have been widely studied with respect to their carcinogenic and mutagenic effects on animals and human cells. Phenanthrene (PHE) and fluoranthene (FLU) effects on the needle photosynthetic traits of 2-year-old Japanese red pine (Pinus densiflora Sieb. et. Zucc.) seedlings were investigated. Three months after fumigation of foliage with solutions containing these PAHs (10 microM each), FLU had negative effects on net photosynthesis at near-saturating irradiance, stomatal conductance, initial chlorophyll fluorescence, and the contents of total chlorophyll, magnesium, and ribulose 1,5-bisphosphate carboxylase (rubisco) of current-year needles. PHE had similar negative effects to FLU but in lesser magnitude. The effects of the PAHs were mitigated by the addition of an OH-radical scavenger (mannitol) into the PAH solutions. PAHs deposited on the surface of pine needles may induce the generation of reactive oxygen species in the photosynthetic apparatus, a manner closely resembling the action of the herbicide paraquat.     

A numerical study of summer ozone concentration over the Kanto area of Japan using the MM5/CMAQ model

We assessed the ability of the MM5/CMAQ model to predict ozone (O3) air quality over the Kanto area and to investigate the factors that a ect simulation of O3. We find that the coupled MM5/CMAQ model is a useful tool for the analysis of urban environmental problems. The simulation results were compared with observational data and were found to accurately replicate most of the important observed characteristics. The initial and boundary conditions were found to have a significant e ect on simulated O3 concentrations. The results show that on hot and dry days with high O3 concentration, the CMAQ model provides a poor simulation of O3 maxima when using initial and boundary conditions derived from the CMAQ default data. The simulation of peak O3 concentrations is improved with the JCAP initial and boundary conditions. On mild days, the default CMAQ initial and boundary conditions provide a more realistic simulation. Meteorological conditions also have a strong impact on the simulated distribution and accumulation of O3 concentrations in this area. Low O3 concentrations are simulated during mild weather conditions, and high concentrations are predicted during hot and dry weather. By investigating the e ects of di erent meteorological conditions on each model process, we find that advection and di usion di er the most between the two meteorological regimes. Thus, di erences in the winds that govern the transport of O3 and its precursors are likely the most important meteorological drivers of ozone concentration over the central Kanto area.     

Glycosylation of bisphenol A by freshwater microalgae

The endocrine disruptor bisphenol A (BPA, 4,4'-isopropylidenediphenol) is used to manufacture polycarbonate plastic and epoxy resin linings of food and beverage cans, and the residues from these products are then sometimes discharged into rivers and lakes in waste leachates. However, the fate of BPA in the environment has not yet been thoroughly elucidated. Considering the effect of BPA on aquatic organisms, it is important that we estimate the concentration of BPA and its metabolites in the aquatic environment, but there are few data on the metabolites of BPA. Here, we focused on freshwater microalgae as organisms that contribute to the biodegradation or biotransformation of BPA in aquatic environments. When we added BPA to cultures of eight species of freshwater microalgae, a reduction in the concentration of BPA in the culture medium was observed in all cultures. BPA was metabolized to BPA glycosides by Pseudokirchneriella subcapitata, Scenedesmus acutus, Scenedesmus quadricauda, and Coelastrum reticulatum, and these metabolites were then released into the culture medium. The metabolite from P. subcapitata, S. acutus, and C. reticulatum was identified by FAB-MS and (1)H-NMR as bisphenol A-mono-O-beta-d-glucopyranoside (BPAGlc), and another metabolite, from S. quadricauda, was identified as bisphenol A-mono-O-beta-d-galactopyranoside (BPAGal). These results demonstrate that freshwater microalgae that inhabit universal environments can metabolize BPA to its glycosides. Because BPA glycosides accumulate in plants and algae, and may be digested to BPA by beta-glycosidase in animal intestines, more attention should be given to levels of BPA glycosides in the environment to estimate the ecological impact of discharged BPA.     

Why is competition more intense if food is supplied more slowly?

We investigated competition for food among two groups of six clone amagos (salmonids), Oncorhynchusmasoumacrostomus, in a laboratory experiment with different rates of food input. We examined the effect of temporal clumping of food resources on the inequality of food sharing between competitors. Monopolization of food by dominants was greater at a low input rate (one food item per 10 s) than at a high input rate (1 food item per 1 s). Aggressive behavior by dominants was more frequent at the low input rate than at the high input rate; its purpose was presumably to interfere with the feeding behavior of subordinates. We assessed the relative importance of three foraging factors (the number of approaches to food items, the chance per approach and the gain per chance) in enhancing inequality in food gain between individuals. Dominants had a disproportionately high chance per approach and gain per chance at the low input rate, but not at the high input rate. The chance of obtaining a food item per approach depended on how many competitors approached simultaneously. The gain per chance depended on the competitive ability of the approaching fish. There was an interaction between these components, such that the number of approaches affected the chance per approach and gain per chance. We evaluated the independent effect of the chance per approach, and showed that it was higher for dominants than for subordinates at the low input rate, but not at the high input rate. This implies that subordinates changed their behavior and became more likely to avoid approaching food at the same time as dominants at the low input rate. Received: 13 August 1996 / Accepted after revision: 30 November 1996     

Inactivation of antineoplastics in clinical wastewater by electrolysis

Wastewater from clinical institutions contains a considerable amount of toxic substances. Among the toxic substances, antineoplastics may induce carcinogenesis, teratogenesis, and the emergence of mutant microorganisms in the environment. Although the incineration or chemical treatments of disposed antineoplastics are recommended, a high energy during incineration and a careful quality control during chemical treatment are required. In this study, we determined the conditions for the electrolytic treatment of an antineoplastic, epirubicin hydrochloride (EH), using two platinum electrodes with a constant current of 100 mA. We analyzed the cytotoxicity, mutagenicity and antibacterial activity of electrolyzed EH and compared them with those of unelectrolyzed EH. Nearly 100% cytotoxicity, mutagenicity and antibacterial activity were eliminated and HPLC did not detect an EH molecule, in the case of electrolysis for 6 h. We also examined the biological cytotoxicities of electrolyzed irinotecan hydrochloride, vincristine sulfate, mitomycin C, paclitaxel, methotrexate and cisplatin, and found that 72.1-99.999% toxicity was eliminated by electrolysis under the same conditions. The biological toxicity of a mixture of these drugs was determined to be decreased by approximately 99% by electrolysis under the same conditions.     

Development of a novel hybrid microwave-heater reactor for paper-based waste treatment

It is necessary to develop a medical waste management system featuring nonburning treatment and safety functions for small medical institutions. In this article, the development of a waste management system without oxygen injection was achieved by means of hybrid heating using microwave energy and an electric heater. The shape of the microwave reactor was a rectangular parallelepiped with a volume of about 0.1 m³. In the experimental setup, microwave energy (2.45 GHz, about 800 W) was injected from the top of the reactor, while the heater (about 1 kW) was located at the bottom. Heat insulators were set into all the walls of the reactor. The gases generated in the system were vented through water and activated carbon. Five paper-based diapers with absorbed water were used as the waste sample. For the evaluation of performance, the reduction rate was defined as the ratio (in percent) of the weight before and after treatment. The reduction rate as a function of treatment time and the effect of the position of the waste in the reactor on the reduction rate and the uniformity of treatment were examined for about 3 kg of waste. It was found that the reduction rate reached as low as 4.2% at 3 h and then 3% after 8 h. The treated profile strongly depended on the position of the waste in the reactor. In particular, it was clarified that a metal cylindrical enclosure and a needle electrode played an important role in attaining uniform treatment of the waste.