Enzymatic Degradation and Aminolysis of Microbial Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) Single Crystals

Solution-grown single crystals of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] were hydrolyzed by polyhydroxybutyrate (PHB) depolymerase from Ralstonia pickettii T1. Enzymatic degradation proceeded from the edges of lamellar crystals, yielding serrated contour and small crystal fragments. Gel permeation chromatography analysis revealed that the molecular weights of the crystals decreased during enzymatic degradation, suggesting that the enzymatic hydrolysis of chain-folding regions at the crystal surfaces occurred in addition to the enzymatic degradation at crystal laterals or edges. After P(3HB-co-4HB) single crystals were aminolysed in 20% aqueous methylamine solution to remove the folded-chain regions and enzymatic degradation by lipase from Rhizopus oryzae to remove 4HB components at crystal surfaces of single crystal aminolyzed, it was found that a small amount (up to ca. 2 mol%) of 4HB component can be incorporated into the P(3HB) mother crystal lattice irrespective of the 4HB content.     

Hydrogen-rich synthesis gas production from waste wood via gasification and reforming technology for fuel cell application

The purpose of this study was to establish a fuel process for an advanced power generation system in which hydrogen-rich synthesis gas, as the fuel for the molten carbonate fuel cell (MCFC), can be extracted from biomass via gasification and reforming technologies. Experiments on waste wood gasification were performed using a bench-scale gasification system. The main factors influencing hydrogen generation in the noncatalytic process and in the catalytic process were investigated, and temperature was identified as the most important factor. At 950°C, without employing a catalyst, hydrogen-rich synthesis gas containing about 54 vol% hydrogen was extracted from feedstock with appropriately designed operation parameters for the steam/carbon ratio and the equivalence ratio. However, by employing a commercial steam reforming catalyst in the reforming process, similar results were obtained at 750°C.     

Bioelectrochemical conversion of urea to nitrogen using aminated carbon electrode

Urea decomposes to ammonia and carbon dioxide via carbamic acid, and amine groups can be introduced to the glassy carbon electrode surface during the electrode oxidation of carbamic acid. This modified carbon electrode has excellent catalytic activity of the oxidation of carbamic acid, and can be used to electrooxidize urea by combining urease reaction and electrode oxidation. We found that nitrogen gas is finally produced by the carbamic acid produced from urea. The production of nitrogen was confirmed by gas chromatography-mass spectrometry, and fragment pattern of hydrazine was also detected in the electrolyzed solution of urea. We intend to describe new electrochemical conversion system of urea to harmless nitrogen gas. The electrode oxidation current of urea was decreased by addition of radical trapping agent such as DMPO (5,5-dimethyl-1-pyrroline N-oxide), and this fact suggests that carbamic acid radical couples to form nitrogen-nitrogen bond, and this dimer is oxidized to nitrogen. The electrode oxidation current of urea became larger when oxygen was removed. This fact indicates that the intermediate species (probably hydrazine) produced by the electrolysis is oxidized by not only electrode reaction but also oxygen.     

Population maintenance of the short-lived shrub Sambucus in a deciduous forest

This study quantitatively clarifies the life history of a shrub, Sambucus racemosa ssp. sieboldiana, in an old-growth forest, the Ogawa Forest Reserve, Japan, by a demographic approach using a projection matrix model that incorporates interactions between demographic parameters and canopy height dynamics. S. racemosa is a common deciduous shrub in central Japan and is known to grow predominantly at forest edges or roadsides. This indicates that it is a highly light-demanding species, and occurrence in gaps in old-growth stands suggests its "fugitive," gap-dependent life history in old-growth forests. We found that one distinctive feature of this species was that its seedlings can survive well in shaded conditions by alternating stems every year like perennial herb species. Matrix model analyses demonstrated that S. racemosa can continuously regenerate under the present disturbance regime of this forest and is highly adaptable to the structural dynamics of the old-growth forest. The maturity of S. racemosa shrubs depends on their size, and nearly all (>90%) of the mature (reproducing) individuals were found in gaps or near gaps. But wide seed dispersal by birds and the ability to form both seed banks and seedling banks, the latter of which has been regarded as a common characteristic of shade-tolerant climax species, probably increase the species' chances to encounter canopy gaps. Dynamic-canopied matrix models showed that the greatest elasticity is with shaded seedling survival. The frequent stem alternation of shaded seedlings often makes the growth rate negative, but the survival rate of seedlings in low light awaiting new gap creation is remarkably high (0.93 yr(-1)). The lower survival rate of the larger individuals and smaller minimum size to start reproduction than other canopy or subcanopy shade-tolerant species indicate that S. racemosa has the potential to reproduce before the closure of the encountered gaps and to complete its life history rapidly.     

Environmental impact assessment of sprayed-on asbestos in buildings

This study evaluated the environmental impacts of sprayed-on asbestos, which had been used as insulation material in buildings, from multiple perspectives, mainly at the disposal stage. The health risks from asbestos emission and energy consumption were estimated. Two disposal scenarios were assumed for the asbestos: melting for reduced-risk disposal and ordinary packaging/landfilling. We estimated the asbestos emission and health risk in the case of packaging/landfilling, assuming uncontrolled management of the landfill site. A difficulty with introducing health-risk concepts into life cycle assessment (LCA) is the pulse–flux problem, which is discussed in the light of these estimations. In order to solve this problem, we proposed a method using a conversion factor representing exposure-dose/emission, and showed that emission could be converted into health risk. We also estimated the energy consumption for melting asbestos in the disposal stage, which can decrease the health risk. If we consider the energy consumption for the life cycle of asbestos, only a little energy is required for melting, compared with the large amount of energy saved in the use stage owing to the insulating effect of the asbestos. The trade-off relationship between health risk and energy consumption for the disposal scenarios indicated the need for weighting methods to handle trade-offs such as this. Received: July 2, 1998 / Accepted: December 20, 1999     

Investigation of hydrogen generation from municipal solid waste incineration fly ash

Hydrogen generation from municipal solid waste incineration fly ash was investigated to understand the influences of contacting method, kinds of contact solution, liquid to solid ratio, and particle size distribution of materials. Redox properties of materials and hydrogen generation were also studied. The largest quantity of gas generated in contact with water was 29.1 ml/g-ash, most of which was hydrogen. Fluidized bed fly ash generated more gas than stoker fly ash. In order to calculate the hydrogen generation potential (the maximum quantity of gas generated in contact with water), a novel system using a Y-shaped test tube and NaOH was utilized. This method gives values which are related to the quantity of generated gas in contact with water. A relationship between the aluminum content and hydrogen generation potential was observed, especially for fluidized bed fly ash. The reducing potential of fluidized bed fly ash was higher than that of stoker fly ash. Only fluidized bed fly ash showed a positive correlation between aluminum content and reducing potential, and between reducing potential and hydrogen generation potential. These results suggest that fluidized bed fly ash contains more Al⁰ than stoker fly ash. Received: September 11, 1998 / Accepted: March 19, 1999     

Maternal exposure to high levels of dioxins in relation to birth weight in women affected by Yusho disease

Background

Studies on the association of maternal exposure to polychlorinated dibenzo-p-dioxin (PCDDs), polychlorinated dibenzofurans (PCDFs), and polychlorinated biphenyls (PCBs) with decreased birth weight in humans have produced conflicting results. In Japan in 1968, an accidental human exposure to rice oil contaminated with PCDDs, PCDFs, and PCBs, led to the development of Yusho disease.

Objective

The Yusho cohort was used to evaluate the effect of maternal exposure to PCDDs, PCDFs, and PCBs on birth weight.

Methods

Blood samples, obtained from 101 Yusho women (190 births) who gave birth after exposure, were analyzed for congeners of seven PCDDs, ten PCDFs, and four non-ortho PCBs.

Results

Total PCDD TEQ (adjusted beta = − 161.9 g; 95% CI, −265.3 to − 58.6), total PCDF TEQ (adjusted beta = − 105.9 g; 95% CI, −179.5 to − 32.2), and total non-ortho PCBs (adjusted beta = − 178.4 g; 95% CI, −318.3 to − 38.5) levels were inversely associated with birth weight. Significant inverse associations with birth weight were also found for total PCDD TEQ, total PCDF TEQ, and total non-ortho PCB TEQ levels among male, but not female, infants. Significant inverse associations with birth weight were also found for nine congeners among all infants; the adjusted beta coefficients were largest for 1,2,3,6,7,8-HxCDD and smallest for 2,3,4,7,8-PeCDF.

Conclusion

In the setting of exposure to high levels of dioxins, maternal blood levels of PCDDs, PCDFs and PCBs are associated with lower birth weight in Yusho patients. The association exhibited gender-specific differences, as male infants are more susceptible than females to growth restriction induced by in utero dioxin exposures.     

Influence of secondary formation on atmospheric occurrences of oxygenated polycyclic aromatic hydrocarbons in airborne particles

Temporal and spatial variations in concentrations of particle-associated polycyclic aromatic hydrocarbons (PAHs) and their nitrated and oxygenated derivatives (nitro-PAHs and oxy-PAHs) were investigated to assess the influence of secondary formation on atmospheric occurrences of oxy-PAHs associated with particulate matter in downtown Tokyo, Japan. The daily variation in concentration of 1,8-naphthalic anhydride (1,8-NA) in summer 2007 was similar to that for 2-nitrofluoranthene (2-NF), a representative secondary formed nitro-PAH, while the variation for benzanthrone (BA) was similar to PAHs. In addition, the concentrations of polycyclic aromatic compounds (PACs) associated with airborne particulate matter decreased in the order of PAHs > BA > 9-fluorenone (9-FO) or 9,10-anthraquinone (9,10-AQ) > 1,8-NA with an increase in distance from the roadside, whereas 2-NF was constant. These results suggest that a considerable fraction of some oxy-PAHs such as 1,8-NA associated with airborne particulate matter in downtown Tokyo originates from atmospheric secondary formation.