Control of chlorinated aromatic compounds from a municipal solid waste incinerator using limestone addition

In this study, limestone powder was directly added to synthetic MSW, which was fed into a small‐scale fluidized bed incinerator. The concentration of CBzs and CPs in the flue gas were measured before and after a secondary combustion air injection. Finally, the PCDDs and PCDFs concentrations were also measured in the flue gas after the secondary combustion zone. The CaCO₃ added to synthetic MSW not only controls HCl in the flue gas, but suppresses the formation of chlorinated aromatic compounds like CBzs, CPs, PCDDs, and PCDFs. The main mechanisms to control the formation of chlorinated aromatic compounds was more likely related to the suppression of catalytic capability of flyash than the HCl reduction in the flue gas. However, the NO concentration was increased by catalytic reaction of limestone in the fluidized bed.     

European starling nestling response to chlorpyrifos exposure in a corn agroecosystem

European starling (Sturnus vulgaris) nestlings were used as a surrogate to study the effect of chlorpyrifos application to a corn agroecosystem on songbird reproduction. Chlorpyrifos was applied in a T‐band at 1.3 kg AI/ha, and residues were measured in soil, earthworms, ground‐dwelling insects, and diet items collected from the crop of starling nestlings. Chlorpyrifos levels in soil peaked at 34.2 μg/g, 4 days post‐application, and dissipated to trace levels by 64 days post‐application. Concentrations of chlorpyrifos in earthworms and ground‐dwelling insects reached 0.9 and 0.7 ug/g, respectively. Starling nestling diet items included invertebrates from eight orders with chlorpyrifos concentrations ranging from trace levels to 10.6 μg/g in earthworms. Nestling brain and plasma cholinesterase (ChE) activity and body mass measurements were taken at 3, 8, and 13 days post‐hatch (DPH). Adult starling fecundity was also measured. Body mass differences between treatment and reference site nestlings at 3 and 13 DPH were not significant at α = 0.05. However, 8 DPH nestlings from the Treatment Site had a transient reduction in weight (p = 0.03) when compared with 8 DPH reference nestlings. There were no significant differences in brain or plasma ChE activities of 3, 8, or 13 DPH nestlings. Further, multiple measures of fecundity (i.e., clutch size, hatching percentage, and fledging percentage) indicated that chlorpyrifos application did not affect starling nestling survival to fledging, as the values from the Treatment and Reference Site were nearly identical. This screening‐level study suggests that although one age group of starling nestlings from the Treatment Site weighed less than their Reference Site counterparts, a single T‐band application of chlorpyrifos did not impair starling nesting success.     

Organizational issues for disseminating recycling technologies of carbon fiber-reinforced plastics in the Japanese industrial landscape

Journal of Material Cycles and Waste Management - Carbon fiber-reinforced plastics (CFRP) are used for structural materials in the aircraft and automotive industries due to their lightweight and...     

Use of an ultraviolet light-activated persulfate process to degrade humic substances: effects of wavelength and persulfate dose

Environmental Science and Pollution Research - Natural organic matter (NOM), commonly found in surface and ground waters, form disinfection by-products in drinking water. Generally, advanced...     

Formation characteristics of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and coplanar PCBs in fly ash from a gasification–melting process of municipal solid waste

PCDDs/DF and Co-PCB (dioxin) formations were studied with ash from a newly developed gasification and melting process for municipal solid waste. Ash samples were heated in a laboratory-scale fixed-bed reactor. Emphasis was placed on the effects of the type and composition of ash, temperatures, gas residence time, and gaseous organic precursors. Investigations using macroscopic and homologue distribution analyses led to the following conclusion. The ash from the gasification–melting process had the ability to generate dioxins in flue gas. A possible carbon source is unburned carbon in the ash samples, although this was very low (less than 0.01%). An experimental result that the level of dioxins generated from preheated fly ash obtained from a conventional incinerator was much lower than that from nonheated fly ash supported this conclusion. Dioxin concentrations obviously showed temperature dependence and peaked at 350°C. Dioxins formed in a gasification–melting process ash were readily desorbed from the surface, probably because of the low carbon content of the ash. There was no experimental evidence that gaseous organic precursors fed to the reactor generated dioxins. Therefore, an organic precursor was not essential for the formation of dioxins. A good linear relationship obtained between PCDDs/DFs and gas residence time also supported the assumption. Received: February 14, 2000 / Accepted: June 30, 2000     

Sesquiterpene Hydrocarbons: Kairomones with a releaser effect in the sexual communication of the white-spotted longicorn beetle, <Emphasis Type="Italic">Anoplophora malasiaca</Emphasis> (Thomson) (Coleoptera: Cerambycidae)

Summary.  We conducted a series of experiments with the white-spotted longicorn beetle Anoplophora malasiaca (Thomson), and its host plant, Citrus unshiu, to examine the origin of the sesquiterpene hydrocarbons (SHCs; including β-elemene, β-caryophyllene, α-humulene, α-farnesene, and several unidentified compounds) that are contained in the elytra of the beetles and act as an attractant. In the laboratory, mechanically wounded citrus branches, as well as those fed upon by A. malasiaca, attracted males more frequently than intact branches. Solid phase microextraction (SPME) and subsequent analyses by gas chromatography (GC) analyses detected measurable SHCs from the air around both mechanically wounded and beetle-infested branches, as well as trace amounts from intact branches. The SHCs were also detected for a certain time from beetles that had fed on the citrus branches, but the amounts decreased rapidly after they were removed from the host. This decrease generally corresponded with a reduction of attractiveness of the beetles in a behavioural assay. Isolated females acquired the SHCs after exposure to, but not upon contact with, other females that had fed on C. unshiu branches. We hypothesize that the citrus SHCs are adsorbed in, retained on, and released from the wax layer of the beetle elytra. Since these compounds are released from branches when beetles feed, they may indirectly signal the presence of beetles to others in the field. The high response rate to SHCs by males is likely representing mate searching behavior. The SHCs act as kairomones with a releaser effect in the communication system of A. malasiaca. Hiroe Yasui, Toshiharu Akino, Midori Fukaya: These authors contributed equally to this article.     

Evaluation of an electrolysis apparatus for inactivating antineoplastics in clinical wastewater

We recently reported a system for inactivating antineoplastics in which sodium hypochlorite is supplied by the electrolysis of sodium chloride solution. In this study, we designed an electrolysis apparatus for inactivating the cytotoxicity of antineoplastics in clinical wastewater using the system. The apparatus consists of an electrolysis cell with platinum-iridium electrodes, a pool tank, a circulating system for wastewater, a safety system for explosive gas and overflow, and an exhaust duct. The free chlorine concentration increased linearly up to 6500 mg l(-1), and pH also increased to 9.0-10.0 within 2h, when 0.9% sodium chloride solution was electrolyzed. We examined its efficacy with model and clinical wastewaters. The reciprocal of dilution factor for disappearance of cytotoxicity using Molt-4 cells was compared before and after electrolysis. In the model wastewater, that was 9.10 x 10(4) before electrolysis, and 3.56 x 10(2) after 2h of electrolysis. In the clinical wastewater (n=26), that was 6.90 x 10(3)-1.02 x 10(6) before electrolysis, and 1.08 x 10(2)-1.45 x 10(4) after 2h of electrolysis. Poisonous and explosive gases released by the electrolysis were measured; however, they were found to be negligible in terms of safety. The environmental load was evaluated by carbon dioxide generation as an index and it was found that the carbon dioxide generated by the electrolysis method was 1/70 lower than that by the dilution method with tap water. Moreover, the cost of the electrolysis method was 1/170 lower than that of the dilution method. This method was found to be both effective and economically valuable.     

Phytotoxicities of fluoranthene and phenanthrene deposited on needle surfaces of the evergreen conifer, Japanese red pine (Pinus densiflora Sieb. et Zucc.)

Polycyclic aromatic hydrocarbons (PAHs) have been widely studied with respect to their carcinogenic and mutagenic effects on animals and human cells. Phenanthrene (PHE) and fluoranthene (FLU) effects on the needle photosynthetic traits of 2-year-old Japanese red pine (Pinus densiflora Sieb. et. Zucc.) seedlings were investigated. Three months after fumigation of foliage with solutions containing these PAHs (10 microM each), FLU had negative effects on net photosynthesis at near-saturating irradiance, stomatal conductance, initial chlorophyll fluorescence, and the contents of total chlorophyll, magnesium, and ribulose 1,5-bisphosphate carboxylase (rubisco) of current-year needles. PHE had similar negative effects to FLU but in lesser magnitude. The effects of the PAHs were mitigated by the addition of an OH-radical scavenger (mannitol) into the PAH solutions. PAHs deposited on the surface of pine needles may induce the generation of reactive oxygen species in the photosynthetic apparatus, a manner closely resembling the action of the herbicide paraquat.     

Glycosylation of bisphenol A by freshwater microalgae

The endocrine disruptor bisphenol A (BPA, 4,4'-isopropylidenediphenol) is used to manufacture polycarbonate plastic and epoxy resin linings of food and beverage cans, and the residues from these products are then sometimes discharged into rivers and lakes in waste leachates. However, the fate of BPA in the environment has not yet been thoroughly elucidated. Considering the effect of BPA on aquatic organisms, it is important that we estimate the concentration of BPA and its metabolites in the aquatic environment, but there are few data on the metabolites of BPA. Here, we focused on freshwater microalgae as organisms that contribute to the biodegradation or biotransformation of BPA in aquatic environments. When we added BPA to cultures of eight species of freshwater microalgae, a reduction in the concentration of BPA in the culture medium was observed in all cultures. BPA was metabolized to BPA glycosides by Pseudokirchneriella subcapitata, Scenedesmus acutus, Scenedesmus quadricauda, and Coelastrum reticulatum, and these metabolites were then released into the culture medium. The metabolite from P. subcapitata, S. acutus, and C. reticulatum was identified by FAB-MS and (1)H-NMR as bisphenol A-mono-O-beta-d-glucopyranoside (BPAGlc), and another metabolite, from S. quadricauda, was identified as bisphenol A-mono-O-beta-d-galactopyranoside (BPAGal). These results demonstrate that freshwater microalgae that inhabit universal environments can metabolize BPA to its glycosides. Because BPA glycosides accumulate in plants and algae, and may be digested to BPA by beta-glycosidase in animal intestines, more attention should be given to levels of BPA glycosides in the environment to estimate the ecological impact of discharged BPA.     

A numerical study of summer ozone concentration over the Kanto area of Japan using the MM5/CMAQ model

We assessed the ability of the MM5/CMAQ model to predict ozone (O3) air quality over the Kanto area and to investigate the factors that a ect simulation of O3. We find that the coupled MM5/CMAQ model is a useful tool for the analysis of urban environmental problems. The simulation results were compared with observational data and were found to accurately replicate most of the important observed characteristics. The initial and boundary conditions were found to have a significant e ect on simulated O3 concentrations. The results show that on hot and dry days with high O3 concentration, the CMAQ model provides a poor simulation of O3 maxima when using initial and boundary conditions derived from the CMAQ default data. The simulation of peak O3 concentrations is improved with the JCAP initial and boundary conditions. On mild days, the default CMAQ initial and boundary conditions provide a more realistic simulation. Meteorological conditions also have a strong impact on the simulated distribution and accumulation of O3 concentrations in this area. Low O3 concentrations are simulated during mild weather conditions, and high concentrations are predicted during hot and dry weather. By investigating the e ects of di erent meteorological conditions on each model process, we find that advection and di usion di er the most between the two meteorological regimes. Thus, di erences in the winds that govern the transport of O3 and its precursors are likely the most important meteorological drivers of ozone concentration over the central Kanto area.