Dissolution kinetics of high explosives particles in a saturated sandy soil

Solid phase high explosive (HE) residues from munitions detonation may be a persistent source of soil and groundwater contamination at military training ranges. Saturated soil column tests were conducted to observe the dissolution behavior of individual components (RDX, HMX, and TNT) from two HE formulations (Comp B and C4). HE particles dissolved readily, with higher velocities yielding higher dissolution rates, higher mass transfer coefficients, and lower effluent concentrations. Effluent concentrations were below solubility limits for all components at superficial velocities of 10-50 cm day(-1). Under continuous flow at 50 cm day(-1), RDX dissolution rates from Comp B and C4 were 34.6 and 97.6 microg h(-1) cm(-2) (based on initial RDX surface area), respectively, significantly lower than previously reported dissolution rates. Cycling between flow and no-flow conditions had a small effect on the dissolution rates and effluent concentrations; however, TNT dissolution from Comp B was enhanced under intermittent-flow conditions. A model that includes advection, dispersion, and film transfer resistance was developed to estimate the steady-state effluent concentrations.     

Effects of dioxins and polychlorinated biphenyls (PCBs) on thyroid function in infants born in Japan – the second report from research on environmental health

Dioxins (PCDD + PCDF) and polychlorinated biphenyl (PCB) are potentially hazardous compounds and have structural similarity to thyroid hormones. Our research group on “Dioxins and PCB in Human Milk” was organized in 1997 and has been active for the past three years. We collected breast milk from 80 mothers living in Tokyo, Saitama, Ishikawa and Osaka Prefecture in Japan at 5, 30, 150, 300 postpartum days and measured PCDDs, PCDFs and PCBs during 1998–1999. We added another 20 prefectures and cities during 1999–2000. Breast milk was obtained from 415 mothers at 30 postpartum days (breast-feeding group). Blood was taken from infants who were breast-fed at the age of 1 year for evaluation of thyroid and immune functions. Blood was also taken from 53 infants who were bottle-fed (bottle-feeding group) as a control. Serum T4, T3, FT4 and TSH levels in the breast-feeding (n=337) and bottle-feeding (n=53) groups were within normal ranges and were not significantly different between the two groups. Although there were a large geographic differences of dioxins and co-PCB content in breast milk, there were no differences in serum T4, T3, FT4, TSH levels and no significant correlation between the mean serum levels of TSH and TEQ in breast milk. There was a significant correlation between serum TSH at 1 year of age and that from blood on dried filter paper TSH at 5 days of age. We concluded that dioxin intake from breast milk in Japanese infants did not impair thyroid function. However, long-term effects remain to be evaluated.     

Experiments and numerical simulation on methane flame quenching by water mist

The study of extinguishment using water mist has been motivated due to the phase-out of the use of halens and the search for alternative means that preserve all of the benefits of a clean total flooding agent without adverse environmental impact. With the numerical simulation, we analyzed a gas–liquid two-phase problem including water (liquid), air and methane (gas) using Eulerian equations for the liquid phase and the full Navier–Stokes equations for the gas phase. Gaseous mass, momentum and energy equations are integrated simultaneously by a Harten–Yee explicit non-MUSCL modified-flux type TVD scheme for the convective terms and a central difference scheme for the viscous terms. Liquid phase conservation equations are solved with an application of a flux-vector-splitting scheme. In the experiments in an open room (500×500×500 mm) we observed an interaction of the diffusion flame with the water mists. The results show remarkable flame quenching and a good agreement between the numerical and experimental results.     

Optimization of separation and logistics for recycling materials from wallpaper hanging sites

It is of huge importance for sustainability to find a pragmatic solution for recycling of a variety of wastes emitted in small mass such as the case of wallpaper replacements. A combination of two-step sorting scheme and transportation of the wastes in collaboration with the wholesalers was proposed to enhance the efficiency of recycling. The two-step sorting consists of the first sorting at the wallpaper hanging sites to separate and group wastes in a way to avoid heavy additional burden on the hanging job. Secondary sorting is conducted at a Sorting Center to re-group wastes to send to an intermediate processing company for recycling. To minimize the costs for transportation, the grouped wastes emitted at the hanging sites are brought back by the hangers and kept temporally and then moved to the wholesaler(s) on the way to receive new materials. When the wastes at the wholesaler(s) become sufficiently large for economic transportation, a truck is arranged to collect the wastes to transport them to the Sorting Center. A feasibility study to test the practicality of the method confirmed that it could be operable and the cost would be comparable or lower than that currently incurred for disposal of the wastes.     

Analysis method for PCBs in reclaimed oil using a fast-GC triple stage quadrupole mass spectrometer with the 13-component quantitation method

It is necessary for companies supplying reclaimed oil to analyze polychlorinated biphenyls (PCBs), because there is a possibility of the presence of contaminants due to trace-level PCBs in the reclaimed oil. However, common analysis methods of PCBs are time-consuming and complicated. Fast-GC triple stage quadrupole mass spectrometer with the 13-component quantitation method is an official method for analyzing PCBs in insulating oil in Japan. This method is extremely fast and simplified. The purpose of this study involves an investigation of the aforementioned fast and simple method for potential use in the analysis of reclaimed oil. Furthermore, it was attempted to combine the method with sample preparation involving only hexane dilution. The effect of sample dilutions corresponding to 100, 300, and 500 times was evaluated for reducing the matrix effect. The matrix effect was suppressed at a dilution ratio equal to or exceeding 300 times. Calibration curves of four points, namely 0.01, 0.05, 0.1, and 0.5 ng/mL, (ignored origin) by using an internal standard method were prepared for the 13 components. The square of regression coefficient (R²) values of all calibration curves exceeded 0.997. This method was adopted for the analysis of reclaimed oil containing 0.5 μg/mL PCBs, which corresponds to the judgment criteria, and accurate quantitation (accuracy value, 94.0–102%) and good repeatability (%RSD, 3.6%) were obtained. Furthermore, the required sensitivity was maintained even when 800 samples were analyzed without a cleaning ion source and an exchanging analysis column.     

Remediation of toxic metal contaminated soil by washing with biodegradable aminopolycarboxylate chelants

Ex situ soil washing with synthetic extractants such as, aminopolycarboxylate chelants (APCs) is a viable treatment alternative for metal-contaminated site remediation. EDTA and its homologs are widely used among the APCs in the ex situ soil washing processes. These APCs are merely biodegradable and highly persistent in the aquatic environments leading to the post-use toxic effects. Therefore, an increasing interest is focused on the development and use of the eco-friendly APCs having better biodegradability and less environmental toxicity. The paper deals with the results from the lab-scale washing treatments of a real sample of metal-contaminated soil for the removal of the ecotoxic metal ions (Cd, Cu, Ni, Pb, and Zn) using five biodegradable APCs, namely [S,S]-ethylenediaminedisuccinic acid, imminodisuccinic acid, methylglycinediacetic acid, DL-2-(2-carboxymethyl) nitrilotriacetic acid (GLDA), and 3-hydroxy-2,2′-iminodisuccinic acid. The performance of those biodegradable APCs was evaluated for their interaction with the soil mineral constituents in terms of the solution pH and metal-chelant stability constants, and compared with that of EDTA. Speciation calculations were performed to identify the optimal conditions for the washing process in terms of the metal-chelant interactions as well as to understand the selectivity in the separation ability of the biodegradable chelants towards the metal ions. A linear relationship between the metal extraction capacity of the individual chelants towards each of the metal ions from the soil matrix and metal-chelant conditional stability constants for a solution pH greater than 6 was observed. Additional considerations were derived from the behavior of the major potentially interfering cations (Al, Ca, Fe, Mg, and Mn), and it was hypothesized that use of an excess of chelant may minimize the possible competition effects during the single-step washing treatments. Sequential extraction procedure was used to determine the metal distribution in the soil before and after the extractive decontamination using biodegradable APCs, and the capability of the APCs in removing the metal ions even from the theoretically immobilized fraction of the contaminated soil was observed. GLDA appeared to possess the greatest potential to decontaminate the soil through ex situ washing treatment compared to the other biodegradable chelants used in the study.     

Simultaneous determination of seven anticoagulant rodenticides in agricultural products by gel permeation chromatography and liquid chromatography–tandem mass spectrometry

A sensitive and reliable method for the simultaneous determination of hydroxycoumarin-type (brodifacoum, bromadiolone, coumatetralyl, and warfarin) and indandione-type (chlorophacinone, diphacinone, and pindone) rodenticides in agricultural products by gel permeation chromatography (GPC) and liquid chromatography–tandem mass spectrometry (LC–MS/MS) was developed. The procedure involved extraction of the rodenticides from samples with acetone, followed by liquid–liquid partitioning with hexane/ethyl acetate (1:1, v/v) and 10% sodium chloride aqueous solution, then cleanup using GPC, and finally, analysis using LC–MS/MS. High recoveries from the GPC column were obtained for all rodenticides tested using a mobile phase of acetone/cyclohexane/triethylamine (400:1600:1, v/v/v). An ODS column, which contains low levels of metal impurities, gave satisfactory peak shapes for both hydroxycoumarin- and indandione-type rodenticides in the LC–MS/MS separation. The average recoveries of rodenticides from eight agricultural foods (apple, eggplant, cabbage, orange, potato, tomato, brown rice, and soybean) fortified at 0.0005–0.001 mg/kg ranged from 76 to 116%, except for bromadiolone in orange (53%) and diphacinone in soybean (54%), and the relative standard deviations ranged from 1 to 16%. The proposed method effectively removed interfering components, such as pigments and lipids, and showed high selectivity. In addition, the matrix effects were negligible for most of the rodenticide/food combinations. The results suggest that the proposed method is reliable and suitable for determining hydroxycoumarin- and indandione-type rodenticides in agricultural products.     

Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate

Improvement of air quality models is required so that they can be utilized to design effective control strategies for fine particulate matter (PM_2.5). The Community Multiscale Air Quality modeling system was applied to the Greater Tokyo Area of Japan in winter 2010 and summer 2011. The model results were compared with observed concentrations of PM_2.5 sulfate (SO₄^2-), nitrate (NO₃^?) and ammonium, and gaseous nitric acid (HNO₃) and ammonia (NH₃). The model approximately reproduced PM_2.5 SO₄^2? concentration, but clearly overestimated PM_2.5 NO₃^? concentration, which was attributed to overestimation of production of ammonium nitrate (NH₄NO₃). This study conducted sensitivity analyses of factors associated with the model performance for PM_2.5 NO₃^? concentration, including temperature and relative humidity, emission of nitrogen oxides, seasonal variation of NH₃ emission, HNO₃ and NH₃ dry deposition velocities, and heterogeneous reaction probability of dinitrogen pentoxide. Change in NH₃ emission directly affected NH₃ concentration, and substantially affected NH₄NO₃ concentration. Higher dry deposition velocities of HNO₃ and NH₃ led to substantial reductions of concentrations of the gaseous species and NH₄NO₃. Because uncertainties in NH₃ emission and dry deposition processes are probably large, these processes may be key factors for improvement of the model performance for PM_2.5 NO₃^?.

Implications: The Community Multiscale Air Quality modeling system clearly overestimated the concentration of fine particulate nitrate in the Greater Tokyo Area of Japan, which was attributed to overestimation of production of ammonium nitrate. Sensitivity analyses were conducted for factors associated with the model performance for nitrate. Ammonia emission and dry deposition of nitric acid and ammonia may be key factors for improvement of the model performance.     

Blood levels of PCDDs,PCDFs, and coplanar PCBs in Yusho mothers and their descendants: Association with fetal Yusho disease

Maternal exposure to polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and polychlorinated biphenyls (PCBs) may result in adverse health effects in their children. In Japan in 1968, an accidental human exposure to rice oil contaminated with PCDDs, PCDFs, and PCBs, led to the development of Yusho disease. Yusho mothers delivered descendants with low birth weights and hyperpigmented skin and mucosa, which are characteristic of fetal Yusho disease (FYD). The Yusho cohort was used to evaluate the effect of maternal exposure to PCDDs, PCDFs, and PCBs on the development of FYD. Blood samples, obtained from 64 Yusho mothers (117 descendants: 10 with FYD and 107 without FYD), were analyzed for congeners of seven PCDDs, 10 PCDFs, and four coplanar PCBs. We investigated the association between the maternal estimated blood levels of dioxins at delivery and the risk of fetal Yusho disease. We also studied the differences in dioxin blood levels in 24 mother–descendant pairs (5 with FYD and 19 without FYD). The estimated levels of total PCDD TEQ, total PCDF TEQ, total coplanar PCB TEQ, and total TEQ in the maternal blood at delivery were associated with significantly increased risk of FYD. The odds ratios, which present the risk of FYD for a 10-fold increase in blood dioxin, were largest for 1,2,3,6,7,8-HexaCDD (odds ratio = 28.6, 95% confidence interval = 1.67–489.9, p = 0.02). The levels of 1,2,3,6,7,8-HexaCDD in both the Yusho mothers and their descendants with FYD were higher than the levels in those without FYD. These findings suggest that 1,2,3,6,7,8-HexaCDD is the most important causative congener for the development of FYD.     

Hybrid-Type Electrostatic Precipitator

Three experiments were designed to determine the effects of SO₂ concentration on two Southeastern oat varieties—Caroiee and Coker 227. The plants were grown under uniform conditions prior to and after the experimental growth period. During the 7 to 14 day experimental growth period the plants were subjected to four growth temperatures (18/14, 22/18, 26/22 and 30/26° C day/night temperatures) and exposed 2 or 4 times to specific concentrations of SO₂ (from 0 to 4 ppm) for 1.5 or 3.0 hr periods. In the first two experiments, the exposure temperatures were varied (18° to 30° C). In the third design, the exposure temperatures remained constant and two exposure relative humidities (55 and 80%) were used. Injury and growth reductions were more severe in Coker 227 than in Caroiee. Root dry weight (RDW) was affected more than top dry weight (TDW). Plants were more sensitive at the higher growth temperatures. Exposure temperatures had little to variable effects. Plants were more sensitive at 80% than at 55% relative humidity. Biomass was reduced at 0.4 ppm SO₂ after four 3 hr exposures and at 0.75 ppm after two 1.5 hr exposures, but growth was also increased as often. These concentrations approached the accepted threshold for adverse effects to sensitive vegetation. Foliar injury was highly correlated with growth reductions.