4种高级氧化法处理高浓度正丙醇废水的动力学比较

研究了1%和10%(V/V)模拟正丙醇废水在UV/TiO2体系、UV/H2O2体系、Fe2+/H2O2体系和UV/TiO2/Fe2+/H2O2体系等4种工艺条件下的降解动力学过程,对比了降解动力学特点及工艺参数对动力学常数的影响,优化工艺参数。结果表明,UV/TiO2体系和Fe2+/H2O2体系的降解过程可分为零级反应阶段和一级反应阶段,转折点分别在反应开始后2 h和氧化剂浓度为6.7 g/L,UV/H2O2体系和UV/TiO2/Fe2+/H2O2体系分别符合零级反应和一级反应规律;相同工艺参数条件下,6 h反应后,组合工艺UV/TiO2/Fe2+/H2O2体系在处理效率达85%,比前3个体系分别高52.0%、8.3%和32.0%,与UV/TiO2体系和Fe2+/H2O2体系的处理效率之和持平,其协同效应提高了速率常数,在目标物浓度降低时依然可维持较高降解速率。而目标物浓度提高10倍后,UV能量利用率提高35.5倍,氧化剂用量是Fe2+/H2O2体系的1/7.1。     

Influence of lead acetate on soil microbial biomass and community structure in two different soils with the growth of Chinese cabbage (Brassica chinensis)

A greenhouse pot experiment was conducted to evaluate the impact of different concentrations of lead acetate on soil microbial biomass and community structure during growth of Chinese cabbage (Brassica chinensis) in two different soils. The field soils were used for a small pot, short-term 60-day growth chamber study. The soils were amended with different Pb concentrations, ranging from 0 to 900mgkg(-1) soil. The experimental design was a 2 soilx2 vegetation/non-vegetationx6 treatments (Pb)x3 replicate factorial experiment. At 60 days the study was terminated and soils were analyzed for microbial parameters, namely, microbial biomass, basal respiration and PLFAs. The results indicated that the application of Pb at lower concentrations (100 and 300mgkg(-1)) as lead acetate resulted in a slight increase in soil microbial biomass, whereas Pb concentrations >500mgkg(-1) caused an immediate gradual significant decline in biomass. However, the degree of impact on soil microbial biomass and basal respiration by Pb was related to management (plant vegetation) or the contents of clay and organic matter in soils. The profiles of 21 phospholipid fatty acids (PLFAs) were used to assess whether observed changes in functional microbial parameters were accompanied by changes in the composition of the microbial communities after Pb application at 0, 300 and 900mg Pbkg(-1) soil. The results of principal component analyses (PCA) indicated that there were significant increases in fungi biomarkers of 18:3omega6c, 18:1omega9c and a decrease in cy17:0, which is an indicator of gram-negative bacteria for the high levels of Pb treatments In a word, soil microbial biomass and community structure, therefore, may be sensitive indicators reflecting environmental stress in soil-Pb-plant system. However, further studies will be needed to better understand how these changes in microbial community structure might actually impact soil microbial community function.     

Effect of condensed organic matter on solvent extraction and aqueous leaching of polycyclic aromatic hydrocarbons in soils and sediments

The contents of nonhydrolyzable organic matter (NHC) and black carbon (BC) were measured in soils and sediments from the Pearl River Delta, South China. Polycyclic aromatic hydrocarbons (PAHs) were extracted respectively by Soxhlet and an accelerated solvent extraction device (ASE) using different solvents. In addition, sequential aqueous leaching at different temperatures was carried out. The PAH content extracted with the sequential three solvent ASE is two times higher than that using the Soxhlet extraction method. The relationship of the PAH content with the NHC content is very significant. The PAH concentrations measured at various temperature steps fit well to the Van't Hoff equation and the enthalpy was estimated. The investigation indicates that condensed organic matter such as kerogen carbon, aged organic matter, and BC is relevant for the extraction and distribution of native PAHs in the investigated field soils and sediments.     

A fuzzy composting process model

Composting processes are normally complicated with a variety of uncertainties arising from incomplete or imprecise information obtained in real-world systems. Previously, there has been a lack of studies that focused on developing effective approaches to incorporate such uncertainties within composting process models. To fill this gap, a fuzzy composting process model (FCPM) for simulating composting process under uncertainty was developed. This model was mainly based on integration of a fractional fuzzy vertex method and a comprehensive composting model. Degrees of influence by projected uncertain factors were also examined. Two scenarios were investigated in applying the FCPM method. In the first scenario, model simulation under deterministic conditions was conducted. A pilot-scale experiment was provided for verifications. The result indicated that the proposed composting model could provide an excellent vehicle for demonstrating the complex interactions that occurred in the composting process. In the second scenario, application of the proposed FCPM was conducted under uncertainties. Six input parameters were considered to be of uncertain features that were reflected as fuzzy membership functions. The results indicated that the uncertainties projected in input parameters will result in significant derivations on system predictions; the proposed FCPM can generate satisfactory system outputs, with less computational efforts being required. Analyses on degree of influence of system inputs were also provided to describe the impacts of uncertainties on system responses. Thus, suitable measures can be adopted either to reduce system uncertainty by well-directed reduction of uncertainties of those high-influencing parameters or to reduce the computational requirement by neglecting those negligible factors.     

不同预处理对电镀污泥电动过程的影响

以风干电镀污泥为电动处理试验材料,水为阳极电解液,柠檬酸柠檬酸铵缓冲液为阴极电解液,施加25 V直流电压条件下电动运行5 d,研究了水、低浓度木钙和硝酸等预处理对电镀污泥电动过程的影响。结果表明,各处理的阴极电解液pH值变化平稳,都维持在3～3.5较理想的范围。而1％木钙、1％硝酸饱和预处理电镀污泥,明显改变了电动过程中电渗流和电流密度的大小,对电镀污泥Cu、Ni的去除率也有明显增加。其中,木钙、硝酸预处理后对Cu的去除率由对照的13.24％分别提高到19.05％和25.55％,即去除量分别增大3 516.35 mg/kg和7 457.62 mg/kg;木钙、硝酸预处理后对Ni的去除率由对照的14.68％分别提高到16.47％和28.85％,即去除量分别增大800.91 mg/kg和6 359.92 mg/kg。     

Experimental verification of a model describing solid phase microextraction (SPME) of freely dissolved organic pollutants in sediment porewater

To verify a theoretical mass balance and multiple compartment partitioning model developed to predict freely dissolved concentrations (FDCs) of hydrophobic organic chemicals (HOCs) using negligible depletion-solid phase microextraction (nd-SPME), a series of sediment slurry experiments were performed using disposable poly(dimethyl)siloxane (PDMS) coated-SPME fibers and (14)C-radiolabeled HOC analogs. First, pre-calibration of disposable PDMS coated fibers for four model compounds (phenanthrene, PCB 52, PCB 153 and p,p'-DDE) with good precision (PCB 52>PCB 153, and the measured and predicted C(pw) values were not substantially different from empirically determined values except for p,p'-DDE.     

Characterization of phenol degradation by high-efficiency binary mixed culture

Background, aim, and scope  

Two new high phenol-degrading strains, Micrococcus sp. and Alcaligenes faecalis JH 1013, were isolated. The two isolates could grow aerobically in mineral salts medium containing phenol as a sole carbon source at concentration of 3,000 mg L⁻¹. It was found that the binary mixed culture of the two isolates possessed good potential for phenol removal.     

Fe（Ⅱ）EDTA／H2O2电催化降解甲基橙模拟废水的研究

在无隔膜电解槽中,采用SPR（Ru—Ir—TiO2）为阳极,石墨为阴极,考察了Fe（Ⅱ）EDTA／H2O2电催化降解甲基橙（methylorange）模拟废水的影响,发现EDTA很大程度上促进了类电Fenton试剂对甲基橙模拟废水的降解。实验研究表明,在外加电压为5．0V,EDTA：Fe2＋=2：1（摩尔比,Fe2＋=40mmol／L）,H202=48mmot／L,电解质Na2SO4=40mmol／L,废水pH值为（6．5±0．1）的条件下,降解260mg／L的甲基橙模拟废水90min,EDTA的加入可以使甲基橙模拟废水的脱色率由29．5％上升到78．4％,COD由571．429mg／L降至80mg／L,COD的降解率为86％,EDTA在此过程中既是催化剂又是反应物,可有效避免EDTA带来二次环境污染的可能性。     

Anthropogenic magnetic particles and heavy metals in the road dust: Magnetic identification and its implications

Magnetic properties of road dusts in the East Lake area in Wuhan, China, were measured and compared with the results of heavy metal analyses in order to delineate the sources of pollutants. A total of ninety-seven dust samples were collected spatially from four segments with different traffic density and field settings from the roads encircling the lake. Thermomagnetic and hysteresis measurements revealed that the dominant magnetic carrier is coarse-grained magnetite. Correlations between magnetic parameters and element concentrations with traffic density and distances to the industrial region revealed that elements Cu, Ni and Fe mainly originate from vehicle traffic, which is also the major source of coarser magnetic particles (e.g., pseudo-single-domain/multi-domain (PSD/MD) grains), while element Pb and the smaller grains such as single-domain (SD) magnetic particles mainly originate from industrial emissions. The ratio between anhysteretic remanent magnetization and low-field magnetic susceptibility (ARM/χ_lf) can be employed as an indirect indicator for Cu, Fe and Ni emissions resulting from vehicle traffic. Due to the intermixture of elements from different sources, the element concentrations are not conclusive about the pollution source. A linear correlation between magnetic concentration-related parameters (e.g., ARM and saturation isothermal remanent magnetization, SIRM) and the concentrations of major elements (e.g., Cu, Co, Fe, Mn, Ni and V) suggests that they can be used as a proxy for heavy metal pollution. Road dusts in four segments show different magnetic characteristics, indicating various influxes of anthropogenic magnetic materials from vehicle traffic and industrial plants due to the different traffic loads and field settings. These results suggest that magnetic measurements can serve as an efficient complementary tool for the routinely employed geochemical methods to map the heavy metal pollution and trace the sources of pollutants in the road dust.     

Integrated bioleaching of copper metal from waste printed circuit board—a comprehensive review of approaches and challenges

Waste electrical and electronic equipment (e-waste) is the most rapidly growing waste stream in the world, and the majority of the residues are openly disposed of in developing countries. Waste printed circuit boards (WPCBs) make up the major portion of e-waste, and their informal recycling can cause environmental pollution and health risks. Furthermore, the conventional disposal and recycling techniques—mechanical treatments used to recover valuable metals, including copper—are not sustainable in the long term. Chemical leaching is rapid and efficient but causes secondary pollution. Bioleaching is a promising approach, eco-friendly and economically feasible, but it is slower process. This review considers the recycling potential of microbes and suggests an integrated bioleaching approach for Cu extraction and recovery from WPCBs. The proposed recycling system should be more effective, efficient and both technically and economically feasible.