Recovery of Ni(II) from real electroplating wastewater using fixed-bed resin adsorption and subsequent electrodeposition

Resin adsorption and subsequent electrodeposition were used for nickel recovery. Treated wastewater can meet the Electroplating Pollutant Discharge Standard. The spent resin is completely regenerated by 3 BV of 4% HCl solution. 95.6% of nickel in concentrated eluent was recovered by electrodeposition. Effective recovery of high-value heavy metals from electroplating wastewater is of great significance, but recovering nickel ions from real electroplating wastewater as nickel sheet has not been reported. In this study, the pilot-scale fixed-bed resin adsorption was conducted to recover Ni(II) ions from real nickel plating wastewater, and then the concentrated Ni(II) ions in the regenerated solution were reduced to nickel sheet via electrodeposition. A commercial cation-exchange resin was selected and the optimal resin adsorption and regeneration conditions were investigated. The resin exhibited an adsorption capacity of 63 mg/g for Ni(II) ions, and the average amount of treated water was 84.6 bed volumes (BV) in the pilot-scale experiments. After the adsorption by two ion-exchange resin columns in series and one chelating resin column, the concentrations of Ni(II) in the treated wastewater were below 0.1 mg/L. After the regeneration of the spent resin using 3 BV of 4% (w/w) HCl solution, 1.5 BV of concentrated neutral nickel solution (>30 g/L) was obtained and used in the subsequent electrodeposition process. Using the aeration method, alkali and water required in resin activation process were greatly reduced to 2 BV and 3 BV, respectively. Under the optimal electrodeposition conditions, 95.6% of Ni(II) in desorption eluent could be recovered as the elemental nickel on the cathode. The total treatment cost for the resin adsorption and regeneration as well as the electrodeposition was calculated.     

Degradation of antipyrine in the Fenton-like process with a La-doped heterogeneous catalyst

A La-doped Co-Cu-Fe catalyst was synthesized for the antipyrine (ANT) removal. The La-doped catalyst had higher ANT removal than the control (95% vs. 54%). La reduced the particle size and increased the specific surface area of catalyst. The aim of this study was to synthesize a novel lanthanum (La) doped catalyst and to investigate antipyrine removal in wastewater using the Fenton-like process with the catalyst. The La-doped Co-Cu-Fe catalyst was synthesized using the modified hydrothermal method. Results showed that the La-doped catalyst had higher specific surface area and lower particle size than the catalyst without La doping (i.e., the control) (267 vs. 163 m²/g and 14 vs. 32 nm, respectively). Under the conditions of catalyst dosage 0.5 g/L, H₂O₂ concentration 1.70 g/L, and NaHCO₃ 0.1 g/L, the antipyrine removal within 60 min using the Fenton-like process with the La-doped catalyst was much higher than that with the control (95% vs. 54%). The hydroxyl radical concentration with the La-doped catalyst within 60 min was two times higher than that with the control (49.2 vs. 22.1 mg/L). The high catalytic activity of La-doped catalyst was mainly attributed to its high specific surface area based on the X-ray photoelectron spectroscopy result. Our La-doped catalyst should have great potential to remove antipyrine in wastewater using the heterogeneous Fenton-like process.     

浅埋衬砌隧道-邻近建筑地震动力相互作用IBEM模拟

采用高精度间接边界元方法(IBEM)考察地震波入射下隧道-邻近建筑物二维地震动力相互作用的规律。结果表明:建筑物与邻近隧道存在着明显的相互作用,整体动力反应规律取决于隧道,建筑物之间的空间位置关系、隧道埋深、入射波的频率和角度等因素。隧道位于建筑物正下方时,刚性衬砌隧道(相对围岩)对上部结构主要表现为隔震效应;隧道位于建筑物两侧时,隧道对建筑顶部位移有明显放大效应,最大可放大约40%。同时隧道应力也明显增大,最大可放大约43%。因此实际中需根据隧道-建筑物的空间位置关系,适当调整衬砌隧道与沿线建筑物的抗震设防水平。     

Source attribution for mercury deposition with an updated atmospheric mercury emission inventory in the Pearl River Delta Region,China

Estimated anthropogenic Hg emission was 11.9 tons in Pearl River Delta for 2014. Quantifying contributions of emission sources helps to provide control strategies. More attentions should be paid to Hg deposition around the large point sources. Power plant, industrial source and waste incinerator were priorities for control. A coordinated regional Hg emission control was important for controlling pollution. We used CMAQ-Hg to simulate mercury pollution and identify main sources in the Pearl River Delta (PRD) with updated local emission inventory and latest regional and global emissions. The total anthropogenic mercury emissions in the PRD for 2014 were 11,939.6 kg. Power plants and industrial boilers were dominant sectors, responsible for 29.4 and 22.7%. We first compared model predictions and observations and the results showed a good performance. Then five scenarios with power plants (PP), municipal solid waste incineration (MSWI), industrial point sources (IP), natural sources (NAT), and boundary conditions (BCs) zeroed out separately were simulated and compared with the base case. BCs was responsible for over 30% of annual average mercury concentration and total deposition while NAT contributed around 15%. Among the anthropogenic sources, IP (22.9%) was dominant with a contribution over 20.0% and PP (18.9%) and MSWI (11.2%) ranked second and third. Results also showed that power plants were the most important emission sources in the central PRD, where the ultra-low emission for thermal power units need to be strengthened. In the northern and western PRD, cement and metal productions were priorities for mercury control. The fast growth of municipal solid waste incineration were also a key factor in the core areas. In addition, a coordinated regional mercury emission control was important for effectively controlling pollution. In the future, mercury emissions will decrease as control measures are strengthened, more attention should be paid to mercury deposition around the large point sources as high levels of pollution are observed.     

Photochemical degradation kinetics and mechanisms of norfloxacin and oxytetracycline

Environmental Science and Pollution Research - The photochemical degradation of norfloxacin (NOR) and oxytetracycline (OTC) was investigated under ultraviolet (UV) irradiation. The results...     

Male reproductive toxicity involved in spermatogenesis induced by perfluorooctane sulfonate and perfluorooctanoic acid in Caenorhabditis elegans

Environmental Science and Pollution Research - As a persistent organic pollutant, perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) have gained increasing research attention over...     

Could biochar amendment be a tool to improve soil availability and plant uptake of phosphorus? A meta-analysis of published experiments

Environmental Science and Pollution Research - As one of the most important nutrients for plant growth, phosphorus was often poorly available in soil. While biochar addition induced improvement of...     

Protective effects of dietary betaine on intestinal barrier function and cecal microbial community in indigenous broiler chickens exposed to high temperature environment

Environmental Science and Pollution Research - High temperature environment causes reduction in productivity in broilers by disrupting the intestinal barrier function. This study aimed to...     

System dynamic analysis of construction waste recycling industry chain in China

Environmental Science and Pollution Research - With the acceleration of China’s urbanization process, construction activities have led to a substantial increase in construction waste....