巢湖流域河流鱼类群落的时空分布

基于2013年4月和10月对巢湖流域66个河道样点的调查数据,初步研究了巢湖流域河流鱼类群落的时空变化特征。主要研究结果显示,鱼类多样性无显著性的水系间、生态分区间的变化,但随季节和河流级别显著变化:10月份的个体数显著高于4月份,2级河流的物种数和个体数均显著大于1级、3级和4级河流。鱼类群落结构的季节动态显著,随生态分区显著变化,但不受水系、河流级别的显著影响。在二级生态分区水平上,仅西南森林生态亚区的鱼类群落结构与其他5个生态亚区的显著差异;宽鳍鱲、吻虾虎鱼等在西南森林生态亚区具有更高多度,而鲫、鰐、鲤等物种在其他生态亚区多度更高。     

污染防治微生物制剂在城市河流污染控制中的应用及其生物安全

简要论述了污染防治微生物制剂的概念和在城市河流污染控制中的应用,并介绍了国外对微生物制剂的风险评估和对污染防治微生物制剂的管理方式,提出了国内应优先开发本土的天然的污染防治微生物制剂的建议,尽快发展中国环境微生物技术.     

Measurement of gas-phase total peroxides at the summit of Mount Tai in China

Measurement of ambient gas-phase total peroxides was performed at the summit of Mount Tai (Mt. Tai, 1534 m above sea level) in central-eastern China during March 22–April 24 and June 16–July 20, 2007. The hourly averaged concentration of peroxides was 0.17 ppbv (± 0.16 ppbv, maximum: 1.28 ppbv) and 0.55 ppbv (± 0.67 ppbv, maximum: 3.55 ppbv) in the spring and summer campaigns, respectively. The average concentration of peroxides at Mt. Tai, which is in a heavily polluted region, was much lower than hydrogen peroxide measurements made at some rural mountain sites, suggesting that significant removal processes took place in this region. An examination of diurnal variation and a correlation analysis suggest that these removal processes could include chemical suppression of peroxide production due to the scavenging of peroxy and hydroxy radicals by high NO_x, wet removal by clouds/fogs rich in dissolved sulfur dioxide which reacts quickly with peroxides, and photolysis. These sinks competed with photochemical sources of peroxides, resulting in different mean concentrations and diurnal pattern of peroxides in the spring and summer. A principal component analysis was conducted to quantify the major processes that influenced the variation of peroxide concentrations. This analysis shows that in the spring photochemical production was an important source of peroxides, and the major sink was scavenging during upslope transport of polluted and humid air from the lower part of the planetary boundary layer (PBL) and wet removal by synoptic scale clouds. During the summer, highly polluted PBL air (with high NO_x) was often associated with very low peroxides due to the chemical suppression of HO₂ by high NO_x and wet-removal by clouds/fogs in this sulfur-rich atmosphere, especially during the daytime. Higher concentrations of peroxides, which often appeared at mid-nighttime, were mainly associated with subsidence of air masses containing relatively lower concentrations of NO_y.     

Degradation of pentachlorobiphenyl by a sequential treatment using Pd coated iron and an aerobic bacterium (H1)

The reductive dechlorination and biodegradation of 2,2^′4,5,5^′-pentachlorobiphenyl (PCB#101) was investigated in a laboratory-scale. Palladium coated iron (Pd/Fe) was used as a catalytic reductant for the chemical degradation of 2,2^′4,5,5^′-pentachlorobiphenyl, and an aerobic bacteria was used for biodegradation following the chemical reaction in this study. Dechlorination was affected by several factors such as Pd loading, initial soil pH and the amount of Pd/Fe used. The results showed that higher Pd loading, higher dosage of Pd/Fe and slightly acid condition were beneficial to the catalytic dechlorination of 2,2^′,4,5,5^′-pentachlorobiphenyl. In laboratory batch experiments, 2,2^′4,5,5^′-pentachlorobiphenyl was reduced in the presence of Pd/Fe bimetal, which was not further degraded by aerobic bacteria. 2,2^′,4-trichlorobiphenyl (PCB#17), a reduction product from 2,2^′4,5,5^′-pentachlorobiphenyl, was readily biodegraded in the presence of a aerobic bacterial strain. It is suggested that an integrated Pd/Fe catalytic reduction-aerobic biodegradation process may be a feasible option for treating PCB-contaminated soil.     

利用烧结脱硫灰制备胶凝材料的研究

研究了烧结烟气半干法脱硫灰复掺矿渣、钢渣,辅之外加剂,制备胶凝材料的可行性。结果表明,采用改性脱硫灰（GXTLH）、钢渣、矿渣及水泥熟料再混磨制备的复合胶凝材料,具有良好的安定性等水化性能和力学性能;当GXTLH 掺入量为20%、CFII 1.5%、减水剂0.5%及水泥熟料23%时,矿渣掺量在12%～44%、钢渣掺量11%～44%之间制备的胶凝材料初凝时间、终凝时间、力学性能满足GB13592-92《钢渣矿渣水泥标准》;矿渣与钢渣比、水泥熟料及外加剂等掺量一定,GXTLH掺量超过30%时,GXTLH胶凝材料的抗压抗折强度均有所下降。     

海油陆采HSE管理初探＊

文章阐述了国内外海油陆采HSE管理现状,通过分析总结滩海油气生产设施从设计到投入使用全过程HSE管理经验,归纳整理出可借鉴的HSE管理技术,为中国石油海油陆采油田HSE文化的培育提供了有益的建议。     

曙光油田节能减排现状调查及对策研究

曙光采油厂随着超稠油的不断开发,生产能耗也随之增加,通过开展节能减排及节能挖潜工作,全厂能耗增长状态得到了良好的控制,能耗总量由2005年的58.21×10~4t标煤下降到2008年的47.75×10~4t标煤;原油(气)液生产单位综合能耗为52.02 kg标煤/t,同期对比减少0.38 kg标煤/t;生产系统运行效率不断提高。文章详细介绍了曙光油田从机采系统、热注系统、集输系统等方面推广应用节能新技术、新产品,达到其投资和运行费用最少,经济性较好,对油田减排挖潜进行了探讨。     

基于层次分析法的秦皇岛市垃圾填埋场选址评价

城市垃圾填埋场场址的选择,受到当地经济、交通、气候条件,自然地理条件,环境保护条件,水文地质工程地质条件等诸多因素影响,是一项十分复杂的工程。本文总结了秦皇岛市现有垃圾填埋场的基本情况、存在问题及其产生原因。鉴于层次分析法在多目标决策分析方面的成效,将其运用到秦皇岛市垃圾填埋场选址评价中,对研究区进行适宜性分区,依次划分为最佳场地区、适宜场地区、较适宜场地区、不适宜场地区。     

NaCl和KCl对厌氧污泥抑制的动力学研究

在厌氧颗粒污泥和厌氧絮状污泥系统中,进行盐质量浓度(NaCl或KCl质量浓度,下同)对厌氧污泥抑制动力学的研究,得到不同拟合的COD降解动力学方程及参数.实验结果表明:当盐质量浓度为10～30 g/L时,KCl对厌氧污泥的COD比降解速率的抑制程度大于NaCl;当盐质量浓度由0 g/L增至10 g/L时,半速率常数逐渐增加;当盐质量浓度由10 g/L增至30 g/L时,半速率常数逐渐减小;在厌氧污泥系统中,NaCl抑制作用下的盐抑制常数高于KCl,且颗粒污泥的盐抑制常数高于絮状污泥.     

Study on Biodegradable Starch/OMMT Nanocomposites for Packaging Applications

The thermoplastic starch (TPS) and nanocomposite(TPS/OMMT) was prepared with 15% carbamide, 15% ethanolamine and different contents of organic activated montmorillonite (OMMT) by twin-screw extruder with a 130 °C barrel temperature. Fourier transforms infrared spectroscopy and wide angle X-ray diffraction shown that the alkylamine in dodecyl benzyl dimethyl ammonium bromide could react with MMT via cation exchange reaction. After treated, the d(001)space distance of MMT increased from 1.5 to 1.7 nm. Scanning electron microscope revealed that the lower contents of OMMT could disperse well in the matrixes of TPS. The carbamide, ethanolamine and the OMMT could destroy the crystallization behavior of starch, but only the OMMT restrained this behavior for long-term storing. Mechanical properties investigation indicated that the tensile strength and modulus of TPS/OMMT nanocomposites were better than those of TPS, while the elongation at break was descended with the increasing of OMMT contents. When the content of OMMT was 4%, the tensile strength and modulus of TPS was improved from 4.2 and 42 MPa to 6.0 and 76 MPa, respectively.