九江-瑞昌5．7级地震现场房屋安全性鉴定工作的探讨

九江-瑞昌地震虽然震级较小，但震源深度浅，加之本地为历史少震地区，设防水准低，量大面广的非标准砖混和砖木房屋破坏较严重，造成13人死亡和多达20亿的直接经济损失。这充分暴露出我国少震地区城市防御力不足的弊端，经济发展的同时更应注意地震灾害风险的规避。本文介绍了本次地震现场应急工作情况，例举了地震区内不同结构类型房屋在这次地震中的表现和震害特点，并根据本次地震现场房屋安全性鉴定工作的实践和多次地震现场应急工作的经验，对本次地震现场应急工作进行总结。     

河流中BOD-DO动态的数学模拟方法

本文讨论了河流中BOD—DO动态的数学模拟方法,并将该方法应用于图们江,利用在图们江上取得的实测数据建立了江中BOD—DO动态的数学模型。在所得到的模型中,耗氧系数κ_1,复氧系数κ_2,BOD沉淀-再悬浮系数κ_3被表达为流量与水温的函数。表达式中的参数通过系统识别与参数估计方法确定,因此能较好地反映河流的地理环境特点。特别是κ_3的表达式,它以流量为自变量,用一个单一的解析函数同时描述了江中的沉淀与再悬浮现象,具有独创性。 本文所提出的BOD—DO动态模型可以做为图们江水质规划与管理的基础。     

汽车修配厂含油废水处理工程分析

研究了汽车修配厂含油废水的处理技术，提出了隔油－混凝－澄清－过滤处理工艺；根据该工艺设计的汽车修配厂含油废水的处理工程；运行的实际测定结果表明，其处理后的废水，ＣＯＤｃｒ可降到３５ｍｇ／Ｌ，油可降到８ｍｇ／Ｌ，ＳＳ可降到２０ｍｇ／Ｌ，色度可降到１０度，处理后的水可达到广州市的废水处理排放标准，并可回收再利用。     

光电催化氧化处理反渗透浓水

采用光电催化氧化技术对天津市某石化企业反渗透单元浓水进行处理。经光催化、电化学及光电催化氧化处理后浓缩液出水的COD、氨氮及色度去除率进行了对比研究。详细探讨了不同电流密度、反应时间及紫外灯功率对COD、氨氮及色度去除效果的影响。结果表明,在电流密度为2.0 mA/cm2,紫外灯光强度为30μW/cm2的条件下,处理150min后,COD的去除率为92.06%,氨氮浓度从44.61 mg/L下降至2.84 mg/L,色度去除率达到100%。对光电催化氧化法处理不同时间的出水进行了三维荧光光谱及凝胶色谱分析。结果表明,光电催化氧化法可将反渗透浓水中大部分大分子有机物结构破坏,使其分解成小分子有机物。     

微气泡曝气 O3/ H2O2处理 RO 浓水的效能及影响因素简

采用O₃/H₂O₂高级氧化工艺处理炼油厂反渗透（RO）浓水,用溶气泵加压溶气并产生微气泡强化传质,确定装置运行条件,考察气体中臭氧浓度、H₂O₂/O₃初始摩尔比、pH和温度对O₃/H₂O₂处理RO浓水效果的影响,并对RO浓水处理效能进行研究。结果表明,随着气体中臭氧浓度的增加,COD的去除率基本呈线性增加;加入适当量H₂O₂能提高臭氧氧化RO浓水的效果,H₂O₂/O₃初始摩尔比在0~0.8范围内,COD的去除率先增加后下降,H₂O₂/O₃初始摩尔比为0.5时COD去除率最大;pH从6.84增加到9.01,COD去除率逐渐增大,pH为10.03时COD去除率反而降低;在14~28℃范围内,温度低时,升高温度COD去除率增加较大,温度较高时,升高温度对COD去除率的影响较小。为考察该工艺的稳定性,在H₂O₂/O₃初始摩尔比为0.5、溶液pH为8~9、臭氧浓度为80~100 mg/L、温度为10~28℃条件下,对COD为90~140 mg/L的RO浓水氧化处理4~10 h,出水COD维持在39.9~49.9 mg/L,达到《城镇污水处理厂污染物排放标准（GB 18918-2002）》中的一级A标准;去除1 g COD消耗O₃ 1.4~3.3 g,消耗O₃与H₂O₂的总氧量为2.2~4.4 g。     

生物墙对地下水中六价铬的去除效果模拟研究

通过土柱实验模拟地下水环境,研究以发酵树皮为主要反应介质的渗透性生物墙对地下水中六价铬的去除效果,为六价铬污染地下水的修复提供方法和依据.结果表明,模拟生物墙运行数天后,墙内形成弱碱性(pH 7~8)、强还原(Eh<-100 mV)环境,有利于六价铬转化为三价铬并生成沉淀.在进水六价铬浓度为20 mg/L、水流速度为3.7 cm/d的运行条件下,3周期间生物墙对六价铬的去除率稳定在98%左右,生物墙内沿水流方向三价铬的浓度先上升后下降(最高达6.6 mg/L),出水三价铬约为1.0 mg/L.吸附和微生物转化是生物墙对水中六价铬去除的主要反应.     

O(1D)与CF3Cl的反应研究

研究CF3Cl-O3体系在253.7nm紫外光照射下所引发的O(1D)与CF3Cl的反应.O(1D)与CF3Cl的反应最终产物为CF2O、F2、Cl2,并讨论了O(1D)与CF3Cl的反应机理.研究表明,在本实验条件的253.7nm紫外光作用下,CF3Cl自身不发生解离,同时O(3p)不与CF3Cl发生反应.此外外加气体(氮气、氧气)对O(1D)与CF3Cl的反应有较强的淬灭作用.     

Shipboard bilge water treatment by electrocoagulation powered by microbial fuel cells

Reveals the synergy between microbial fuel cells and electrocoagulation. Demonstrates MFC-ECC shipboard wastewater treatment is advantageous. MFC-ECC integration enables energy neutral bilge water treatment. Ships generate large amounts of wastewater including oily bilge water, blackwater and greywater. Traditionally they are treated separately with high energy consumption. In this study we demonstrate the feasibility that these waste streams can be treated using an integrated electrocoagulation cell (ECC) and microbial fuel cell (MFC) process, which not only synergized the contaminants removal but also accomplished energy neutrality by directly powering EC with MFC electricity. Results showed that MFC stack powered ECC removed 93% of oily organics, which is comparable to the performance of an external DC voltage powered ECC. In the meantime, more than 80% of COD was removed from MFCs when fed with either acetate or municipal wastewater. Moreover, the ECC electrode area and distance showed notable effects on current generation and contaminants removal, and further studies should focus on operation optimization to enhance treatment efficiency.     

Examining the technology acceptance for dismantling of waste printed circuit boards in light of recycling and environmental concerns

The dismantling of printed circuit board assemblies (PCBAs) and the recovery of their useful materials can lead to serious environmental impacts mainly due to their complicated physical structure and the variety of toxic elements contained in their material composition. So far, less attention has been paid to their responsible recycling compared to that of bare printed circuit boards. Combined with other materials recovery process, proper dismantling of PCBAs is beneficial to conserve scarce resources, reuse the components, and eliminate or safely dispose of hazardous materials. In analyzing the generation, resources potential and hazardous risk of scrap PCBAs, technologies used for the dismantling of waste PCBAs have been widely investigated and reviewed from the aspects of both industrial application and laboratory-scale studies. In addition, the feasibility of PCBA dismantling has been discussed, the determinants of which, including the heating conditions and mechanical properties have been identified. Moreover, this paper evaluates the environmental consequences caused by the dismantling of PCBAs.     

二氧化碳回收技术进展

CO2的过量排放对全球的气候变暖有着不可推卸的责任,同时CO2又是一种重要的碳资源,对它的回收和利用将具有很大的经济效益和社会效益。CO2回收的方法主要是膜吸收法、变压吸附法、化学吸收法和低温分离法,特别是离子液体对CO2的吸收,为CO2的减排提供了良好的手段。