Road de-icing salt as a potential constraint on urban growth in the Greater Toronto Area, Canada

North America's fifth most populated municipality--the Greater Toronto Area (GTA)--is undergoing rapid urban development with serious questions being raised regarding the long-term impacts of urban growth on the quality and quantity of ground and surface water. Degradation of groundwater quality by NaCl de-icing salt is the primary concern since there are no cost effective alternatives to NaCl de-icing salt and there is little evidence that salt loadings to the subsurface can be significantly reduced. In 2001, the issue acquired a new sense of urgency when de-icing chemicals containing inorganic chloride salts (with or without ferrocyanide de-caking agents) were designated as toxic under the Canadian Environmental Protection Act. To heighten concerns, future growth in the GTA will inevitably take place in areas where groundwater is regularly used for potable supply. Studies using groundwater flow and transport models show that significant deterioration of groundwater quality can be expected in shallow aquifers as a result of urban development with chloride concentrations approaching the drinking water quality standard of 250 mg/l. Results demonstrate that urban planning needs a fresh approach that explicitly includes groundwater protection and aquifer management in the decision-making process, clearly defines acceptable environmental performance standards and makes greater use of groundwater models to evaluate alternative urban designs.     

Methyl bromide as a building disinfectant: interaction with indoor materials and resulting byproduct formation

Several buildings were contaminated with Bacillus anthracis in the fall of 2001. These events required consideration of how to disinfect large indoor spaces for continued worker occupation. The interactions of gaseous disinfectants with indoor materials may inhibit the disinfection process, cause persistence of the disinfectant, and lead to possible byproduct formation and persistence. Methyl bromide (CH3Br) is a candidate for disinfection/deactivation of biological agents in buildings. In this study, 24 indoor materials were exposed to CH3Br for 16 hr at concentrations ranging from 100 to 2500 ppm in 48-L electropolished stainless steel chambers. CH3Br concentrations were measured during and after disinfection. Its interactions with materials were observed to be small, with nearly complete and rapid desorption. Between 3% and 8% of CH3Br adsorbed to four materials (office partition, ceiling tile, particle-board, and gypsum wallboard with satin paint), and the degree of adsorption decreased with increasing relative humidity. The percentage of adsorption to all other materials was <2%. This result suggests that when designing disinfection events with CH3Br, loss to indoor materials can be neglected in terms of disinfectant dose calculations. Possible reaction products were identified and/or quantified before and after exposure to CH3Br. Several monomethylated and dimethylated aliphatic compounds were observed in chamber air at low concentrations after the exposures of six materials to CH3Br. Concentration increases also occurred for chemicals that were observed to naturally off-gas from materials before exposure to CH3Br, suggesting that CH3Br may play a role in enhancing the natural off-gassing of chemicals, for example, by competitive displacement of compounds that already existed in the materials. The results described in this paper should facilitate the design of building disinfection systems involving CH3Br.     

Policy diffusion in arid Basin water management: a Q method approach in the Murray–Darling Basin,Australia

The Murray–Darling Basin is Australia’s national food bowl, home to almost half of the national income from food production, as well as internationally significant wetlands, iconic red gum forests, endangered flora and fauna, and approximately 40 autonomous indigenous nations. Persistent severe drought and extreme flooding episodes have presented new challenges in the region. Chief among these challenges is the establishment of a legitimate framework to sustainably manage water resources that finds common ground between environmental, indigenous and commercial interests. A powerful approach to examine these processes is through the theory of diffusion and adaptation of policy innovations. Here, we describe an approach to place this theory on empirical ground using Q methodology. We elucidate patterns of subjectivity, to explore the perceptions of expert advice, subsidiarity and local knowledge to better understand the interests in play. We find that respect is held for local practitioners (water managers and farmers) and indigenous knowledge, but while policy innovations are being generated, the diffusion of policy is contested. We identify the potential, though limited, for common ground through substantive and respectful consultation.     

A Survey of Ambient Air Levels of Lead in El Paso,Texas from 1972–1979

In an era when the cost of compliance with state and federal environmental laws is rapidly rising, sometimes entities, such as operators of waste sites, are unable to pay these and other operating costs and are forced to file for bankruptcy. Citing Midlantic Nat'l Bank v. N.J. Dep't of Envtl. Protection and state environmental laws, bankruptcy trustees may be suing PRPs in bankruptcy courts to share the costs to clean up debtors' waste sites. This article suggests strategies by which PRPs can avoid litigating such lawsuits in the bankruptcy courts and instead resolve them before state and/or federal forums—where they properly belong.     

Comments on the NAS Report: Odors From Stationary and Mobile Sources

ABSTRACT

Solid phase microextraction (SPME) presents many advantages over conventional analytical methods by combining sampling, preconcentration, and direct transfer of the analytes into a standard gas chromatograph (GC). Since its commercial introduction in the early 1990s, SPME has been successfully applied to the sampling and analysis of environmental samples. This paper presents an overview of the current methods for air sampling and analysis with SPME using both grab and time-weighted average (TWA) modes. Methods include total volatile organic compounds (TVOCs), formaldehyde, and several target volatile organic compounds (VOCs). Field sampling data obtained with these methods in indoor air were validated with conventional methods based on sorbent tubes. The advantages and challenges associated with SPME for air sampling are also discussed. SPME is accurate, fast, sensitive, versatile, and cost-efficient, and could serve as a powerful alternative to conventional methods used by the research, industrial, regulatory, and academic communities.     

Closing Remarks

Considerable attention has been paid in recent years to photochemical smog pollution close to the earth's surface and to stratospheric ozone depletion. There is reason to suspect that the next round of scientific concern will be devoted to the perturbations in the “free troposphere.” Tropospheric ozone has been building up in many regions of the northern hemisphere. Ozone changes in the upper troposphere will exert a considerable impact on global warming. This could affect moisture levels, cloud amount and distribution, precipitation, and atmospheric dynamics on different scales.

This paper analyzes: (1) the physical and chemical processes contributing to changes in tropospheric ozone concentration; (2) the observational evidence of previous ozone change; and (3) results drawn from computer modelling of past and future radiative forcing caused by rising ozone concentrations in the upper troposphere.

The solar and longwave radiative model developed by Wang et al. (1991) was used for calculating the change in radiative forcing to the troposphere-surface system that can be ascribed to changing concentrations in ozone and other greenhouse gases. Nitric oxide emission from aircraft are a prime suspect for the observed increases in upper tropospheric ozone. The inference can be drawn that a radiative forcing of 0.2 to 0.35 Wm^-2 will result from a doubling of aircraft emissions over the next two decades. This will amount to 10 to 25 percent of the radiative forcing attributable to CO₂ alone for the same period. The effect of doubling aircraft emissions will increase as stratospheric ozone concentrations recover from the recent buildup of harmful chlorofluorocarbons. A large fraction of the radiative forcing that occurred during the 1970 to 1990 period can be attributed to increases in tropospheric ozone as opposed to increases in other greenhouse gases.     

Sensor transition failure in the high flow sampler: Implications for methane emission inventories of natural gas infrastructure

Quantification of leaks from natural gas (NG) infrastructure is a key step in reducing emissions of the greenhouse gas methane (CH₄), particularly as NG becomes a larger component of domestic energy supply. The U.S. Environmental Protection Agency (EPA) requires measurement and reporting of emissions of CH₄ from NG transmission, storage, and processing facilities, and the high-flow sampler (or high-volume sampler) is one of the tools approved for this by the EPA. The Bacharach Hi-Flow Sampler (BHFS) is the only commercially available high-flow instrument, and it is also used throughout the NG supply chain for directed inspection and maintenance, emission factor development, and greenhouse gas reduction programs. Here we document failure of the BHFS to transition from a catalytic oxidation sensor used to measure low NG (~5% or less) concentrations to a thermal conductivity sensor for higher concentrations (from ~5% to 100%), resulting in underestimation of NG emission rates. Our analysis includes both our own field testing and analysis of data from two other studies (Modrak et al., 2012; City of Fort Worth, 2011). Although this failure is not completely understood, and although we do not know if all BHFS models are similarly affected, sensor transition failure has been observed under one or more of these conditions: (1) Calibration is more than ~2 weeks old; (2) firmware is out of date; or (3) the composition of the NG source is less than ~91% CH₄. The extent to which this issue has affected recent emission studies is uncertain, but the analysis presented here suggests that the problem could be widespread. Furthermore, it is critical that this problem be resolved before the onset of regulations on CH₄ emissions from the oil and gas industry, as the BHFS is a popular instrument for these measurements.

Implications: An instrument commonly used to measure leaks in natural gas infrastructure has a critical sensor transition failure issue that results in underestimation of leaks, with implications for greenhouse gas emissions estimates as well as safety.     

Phylogeography of the Indo-Pacific parrotfish Scarus psittacus: isolation generates distinctive peripheral populations in two oceans

Phylogenetic, phylogeographic, population genetic and coalescence analyses were combined to examine the recent evolutionary history of the widespread Indo-Pacific parrotfish, Scarus psittacus, over a geographic range spanning three marine biogeographic realms. We sequenced 164 individuals from 12 locations spanning 17,000 km, from 55oE to 143oW, using 322 base pairs of mitochondrial control region (D-loop). S. psittacus displayed high haplotype (h = 0.83–0.98), but low nucleotide (<1%) diversity. Most (>83%) genetic variation was within populations. AMOVA revealed significant partitioning and identified five geographic groups. These included one central population and four populations peripheral to the centre. The central population occupied reefs from Western Australia to Tahiti and represented the central Indo-Pacific biogeographic realm. Cocos Keeling was distinct from central and western Indo-Pacific biogeographic realms occupying a position intermediate to these. Peripheral populations (Hawaii, Marquesas) represented the eastern Indo-Pacific biogeographic realm, while Seychelles represented the western Indo-Pacific biogeographic realm. All but the central population expanded (<163 kya). Whilst all populations experienced major sea level and SST changes associated with Pleistocene glaciation cycles, the genetic structure of the central population was relatively homogenous unlike the remaining genetically distinctive populations.     

Using a fisheries ecosystem model with a water quality model to explore trophic and habitat impacts on a fisheries stock: A case study of the blue crab population in the Chesapeake Bay

Recent calls for the development of ecosystem-based fisheries management compel the development of resource management tools and linkages between existing fisheries management tools and other resource tools to enable assessment and management of multiple impacts on fisheries resources. In this paper, we describe the use of the Chesapeake Bay Fisheries Ecosystem Model (CBFEM), developed using the Ecopath with Ecosim (EwE) software, and the Chesapeake Bay Water Quality Model (WQM) to demonstrate how linkages between available modeling tools can be used to inform ecosystem-based natural resource management. The CBFEM was developed to provide strategic ecosystem information in support of fisheries management. The WQM was developed to assess impacts on water quality. The CBFEM was indirectly coupled with the WQM to assess the effects of water quality and submerged aquatic vegetation (SAV) on blue crabs. The output from two WQM scenarios (1985-1994), a baseline scenario representing actual nutrient inputs and another with reduced inputs based on a tributary management strategy, was incorporated into the CBFEM. The results suggested that blue crab biomass could be enhanced under management strategies (reduced nutrient input) when the effective search rate of blue crab young-of-the-year's (YOY's) predators or the vulnerability of blue crab YOY to its predators was adjusted by SAV. Such model linkages are important for incorporating physical and biological components of ecosystems in order to explore ecosystem-based fisheries management options.