GIS技术在化学事故应急指挥系统中的应用研究

以地理信息系统（简称GIS）的技术特点为基础,结合应急指挥系统中的功能需求,探讨化学事故应急指挥系统GIS平台能够实现的功能,以及为实现这些功能而构建的数据库的建设。将GIS技术应用在化学事故应急指挥系统中,能够迅速、直观地了解事故装置和设备情况,获得有关信息,进行事故模拟。对提高事故处理速度,缩短反应时间,减少事故损失具有重要意义。     

雷达电磁环境的联合建模与仿真

随着雷达灵敏度、精度的提高,对电磁环境的依赖性也越来越大.首先分析了美军的联合建模与仿真系统(JMASS),指出建立一个综合的、可重用的雷达电磁仿真环境是电子战仿真的关键;重点研究了基于球不变随机过程(SIRP)的K分布杂波模型,以及地面/海面的多路径效应模型;最后建立了雷达电磁环境的模型并进行了仿真.     

浸渍液pH值对V-Mo/Ti脱硝催化剂性能的影响研究

为提升V-Mo/Ti催化剂的脱硝性能,在催化剂制备过程中调节浸渍工艺参数,制备了一系列不同浸渍液pH值的催化剂,采用XRD、N2-吸附脱附、拉曼光谱、UV-Vis、H2-TPR、NH3-TPD等手段对催化剂进行表征,考察了pH值的变化对催化剂物理化学性能的影响,采用固定床微型反应器对催化剂的脱硝性能进行评价。结果表明,降低浸渍液pH值,可以抑制催化剂上VOx物种的聚合,提升催化剂的还原性能,有利于提升催化剂的脱硝效率,降低脱硝反应过程中N2O生成量。同时,浸渍液pH值的变化,也会影响催化剂的酸性性能。当浸渍液pH值低于3.64时,催化剂酸性性能显著降低,造成催化剂脱硝性能降低;当浸渍液pH值控制在3.64时,催化剂的还原性能和酸性性能匹配较好,从而显示了较高的脱硝性能。     

电镀污泥脱水稳定剂制备及应用研究

针对电镀污泥脱水过程中金属离子大量溶出带来的处理难题,以四甲基乙二胺、二硫化碳为主要原料,以氢氧化钾为引发剂,采用聚合法制备了一种脱水稳定剂,并考察了稳定剂投加量、污泥pH值、反应温度和反应时间对电镀污泥离心脱水时重金属溶出的影响。结果表明,在稳定剂投加量(稳定剂与污泥的质量比)为1%、反应温度为20℃、pH=1、反应时间为30 min、转速为3 000 r/min条件下对含Ni(Ⅱ)电镀污泥离心脱水后,Ni(Ⅱ)脱水稳定率达96.88%,且脱水稳定剂对混合电镀污泥中Ni(Ⅱ)、Cu(Ⅱ)的选择性大于Zn(Ⅱ)。脱水稳定剂的脱水稳定机理是其中的二硫代氨基甲酸盐与重金属离子M(Ⅱ)(Ni(Ⅱ)、Cu(Ⅱ)、Zn(Ⅱ)等)形成配位键,从而形成稳定的交联网状结构,达到化学稳定,实现了离心脱水极少重金属离子溶出(即脱水稳定)的效果。所合成的脱水稳定剂可广泛用于含镍、铜、锌等金属离子的电镀污泥脱水处理。     

中国西南喀斯特森林土壤有机碳空间变化及影响因素

喀斯特地区土壤碳储量及其影响因素的认识是评估我国陆地土壤生态系统碳汇能力不可或缺的内容。本文通过对中国西南北起秦岭北坡南至中越边境一条剖面上土壤有机碳的分析,研究了喀斯特森林0~10cm土壤有机碳空间变化及其控制因素。研究发现西南地区土壤有机碳含量和碳密度平均为32.3 g/kg和33.1t/hm2。无论是在整个西南区还是其省市范围内,二者均低于非喀斯特森林土壤。通径分析表明,影响喀斯特表层土壤碳含量和密度的主要因素有土壤容重、地形海拔和有机质C/N;粘粒含量和年平均气温的影响很小,而降水量仅在地处最北部的陕西省构成了土壤碳密度的影响因素。此现象与世界许多地区特别是高纬度地区形成鲜明对比。本研究结果表明,不同区域/气候带土壤碳库的主要影响因素会存在很大差异,这对认识气候变化背景下土壤碳库的反馈作用具有重要意义。     

煤矸石堆场Fe、Mn迁移累积效应研究

通过对贵州织金典型煤矿区矸石堆场周边地表水体及耕地进行调查与采样分析,探讨了煤矸石堆场Fe、Mn元素迁移对周边地表水体及耕地累积效应的影响。研究结果表明:受煤矸石堆场酸性排水的影响,煤矸石堆场周边溪沟水Fe、Mn含量分别达0.81~32.14mg/L、1.17~8.42mg/L,超过"集中式生活饮用水地表水源地标准"限值的3~107、12~84倍。堆场周边旱作土中Fe、Mn含量分别达63 530~85 990mg/kg、243.1~910.1mg/kg,水稻土达46 940~75 810mg/kg、144.5~409.1mg/kg,Fe、Mn累积指数旱作土分别达1.61、2.97,水稻土分别达1.24、1.33。随着与堆场距离的增大,水稻土Fe、Mn含量逐步降低,在500m范围内Fe降低了35%,Mn降低了61%,而旱作土变化规律不明显。     

土壤碳淋溶流失研究进展

土壤碳的淋溶流失是指在水的作用下土壤中的碳沿着水文路径转移到水环境的过程。尽管这些流失量有限,却对陆地碳平衡核算具有重要影响。本文在总结了土壤碳淋溶流失研究的重要性、近年来相关领域取得的进展的基础上,指出已有研究的不足有:对土壤无机碳(SIC)的淋溶流失研究薄弱、缺乏野外实地观测、对土地利用变化影响土壤碳淋溶流失的过程与机制认识不足等。今后除了加强以上几个方面的研究外,还要综合利用同位素示踪和在线仪器观测等各种手段,开展"陆地-水生系统连续体"内多界面碳交换的综合研究。     

Reversibility of the structure and dewaterability of anaerobic digested sludge

The reversibility of the structure and dewaterability of broken anaerobic digested sludge(ADS)is important to ensure the efficiency of sludge treatment or management processes.This study investigated the effect of continuous strong shear(CSS)and multipulse shear(MPS)on the zeta potential,size(median size,d_(50)),mass fractal dimension(D_F),and capillary suction time(CST)of ADS aggregates.Moreover,the self-regrowth(SR)of broken ADS aggregates during slow mixing was also analyzed.The results show that raw ADS with d_(50) of 56.5μm was insensitive to CSS–SR or MPS–SR,though the size slightly decreased after the breakage phase.For conditioned ADS with d_(50) larger than 600μm,the breakage in small-scale surface erosion changed to large-scale fragmentation as the CSS strength increased.In most cases,after CSS or MPS,the broken ADS had a relatively more compact structure than before and d_(50) is at least 200μm.The CST of the broken fragments from optimally dosed ADS increased,whereas that corresponding to overdosed ADS decreased.MPS treatment resulted in larger and more compact broken ADS fragments with a lower CST value than CSS.During the subsequent slow mixing,the broken ADS aggregates did not recover their charge,size,and dewaterability to the initial values before breakage.In addition,less than 15%self-regrowth in terms of percentage of the regrowth factor was observed in broken ADS after CSS at average velocity gradient no less than 1905.6 sec~(-1).     

Hexabromocyclododecane and tetrabromobisphenol A in sediments and paddy soils from Liaohe River Basin, China: Levels, distribution and mass inventory

Hexabromocyclododecane(HBCD) and tetrabromobisphenol A(TBBPA) are two kinds of brominated flame retardants and widely present in the environment and biota. The levels,spatial distributions and mass inventories of HBCD and TBBPA were investigated in sediments and paddy soils from the Liaohe River Basin in northeast China. The concentrations of ΣHBCD and TBBPA were in the range of not detected(nd) to 4.02 ng/g dry weight(dw) and 0.03 to 4.06 ng/g dw, respectively. γ-HBCD was dominated in sediments,while the abundance of α-HBCD was relatively high in paddy soils. The spatial distributions of HBCD and TBBPA in surface sediments and paddy soils indicated that the local point-input was their major source. The significant correlation between total organic carbon(TOC) contents and the HBCD levels suggested that TOC content also exerted an influence on the distribution of HBCD in sediments. Meanwhile, it was found that the irrigation with river water was not the major transportation pathway of HBCD and TBBPA in paddy soils. Based on the study, it was estimated that there were about 1.67 tons HBCD and 2.20 tons TBBPA deposited into sediments of the Liaohe River system every year. The total mass inventories of HBCD and TBBPA in sediments were far higher than that in paddy soils.     

Advanced treatment of wet-spun acrylic fiber manufacturing wastewater using three-dimensional electrochemical oxidation

A three-dimensional electrochemical oxidation(3D-EC) reactor with introduction of activated carbon(AC) as particle micro-electrodes was applied for the advanced treatment of secondary wastewater effluent of a wet-spun acrylic fiber manufacturing plant. Under the optimized conditions(current density of 500 A/m~2, circulation rate of 5 mL/min, AC dosage of 50 g, and chloride concentration of 1.0 g/L), the average removal efficiencies of chemical oxygen demand(COD_(cr)), NH3–N, total organic carbon(TOC), and ultraviolet absorption at 254 nm(UV_(254)) of the 3D-EC reactor were 64.5%, 60.8%, 46.4%, and 64.8%, respectively; while the corresponding effluent concentrations of COD_(cr), NH_3–N, TOC, and UV_(254) were 76.6, 20.1, and42.5 mg/L, and 0.08 Abs/cm, respectively. The effluent concentration of COD_(cr) was less than 100 mg/L, which showed that the treated wastewater satisfied the demand of the integrated wastewater discharge standard(GB 8978-1996). The 3D-EC process remarkably improved the treatment efficiencies with synergistic effects for COD_(cr), NH_3–N, TOC, and UV_(254) during the stable stage of 44.5%, 38.8%, 27.2%, and 10.9%, respectively, as compared with the sum of the efficiencies of a two-dimensional electrochemical oxidation(2D-EC) reactor and an AC adsorption process, which was ascribed to the numerous micro-electrodes of AC in the 3D-EC reactor. Gas chromatography mass spectrometry(GC–MS) analysis revealed that electrochemical treatment did not generate more toxic organics, and it was proved that the increase in acute biotoxicity was caused primarily by the production of free chlorine.