强化企业安全检查力度及效果的对策

安全检查是现代安全管理中最有效的手段 ,也是企业发现事故隐患、促进现场安全文明生产的好途径。介绍了安全检查作用及特性 ,并结合目前安全检查存在的不足 ,提出了一些强化安全检查效果的对策。     

Formation of submicron sulfate and organic aerosols in the outflow from the urban region of the Pearl River Delta in China

Size-resolved chemical compositions of non-refractory submicron aerosols were measured using a quadrupole Aerodyne aerosol mass spectrometer at a rural site near Guangzhou in the Pearl River Delta (PRD) of China in the summer of 2006. Two cases characterized as the outflows from the PRD urban region with plumes of high SO₂ concentration were investigated. The evolution of sulfate size distributions was observed on a timescale of several hours. Namely mass concentrations of sulfate in the condensation mode (with vacuum aerodynamic diameters (D_va) < 300 nm) increased at a rate of about 0.17–0.37 ppbv h^?1 during the daytime. This finding was consistent with the sulfuric acid production rates of about 0.17–0.3 ppbv h^?1, as calculated from the observed gas-phase concentrations of OH (～3.3 × 10⁶–1.7 × 10⁷ cm^?3) and SO₂ (～3–21.2 ppbv). This implies that the growth of sulfate in the condensation mode was mainly due to gas-phase oxidation of SO₂. The observed rapid increase was caused mainly by the concurrent high concentrations of OH and SO₂ in the air mass. The evolution of the mass size distributions of m/z 44, a tracer for oxygenated organic aerosol (OOA), was very similar to that of sulfate. The mass loadings of m/z 44 were strongly correlated with those of sulfate (r² = 0.99) in the condensation mode, indicating that OOA might also be formed by the gas-phase oxidation of volatile organic compound (VOC) precursors. It is likely that sulfate and OOA were internally mixed throughout the whole size range in the air mass.     

Prenatal evaluation and postnatal outcomes of fetal ovarian cysts

To evaluate the natural history and outcome of cases of fetal ovarian cyst under conservative prenatal treatment. A retrospective cohort study included patients diagnosed with fetal ovarian cysts was conducted between January 2008 to December 2016. Data including clinical data, sonographic feature and postnatal outcomes were obtained. One hundred and two cases were included for statistical analysis. The rate of spontaneous resolution was significantly higher among cases with simple than complex cysts (70/92 or 76.1% vs 2/10 or 20%, P < .01) and for cysts <4 cm than cysts ≥4 cm (50/56 or 89.3% vs 22/46 or 47.8%, P < .01). Ovarian torsion was confirmed in 5/102 (4.9%) cases; neither prenatal characteristics of cysts (complex: 2/10 or 20% vs simple: 3/92 or 3.3%, P = .07), nor their size ( ≥ 40 mm: 4/46 or 8.7% vs < 40 mm: 1/56 or 1.8%, P = .17) was predictive for ovarian torsion. 25/102 (24.5%) of cysts change in size or sonographic characteristics prenatally. Half of the complex cysts at the last prenatal scan are not ovarian in origin. 98/102 neonates (96.1%) were able to preserve both ovaries. Spontaneous resolution of ovarian cysts is predicted by cyst size and characteristics, whereas likelihood of torsion cannot be predicted.     

Crowding in platform staircases of a subway station in China during rush hours

Crowding during the morning peak hours at a platform staircase in a subway station in China was studied in this paper. Passenger flow was surveyed with normal evacuation time recorded. The evacuation process was simulated with the software buildingEXODUS. Predicted results on the total evacuation time and maximum flow capacity of the selected staircase were compared with the field observations. Two parameters, the width of staircase utilized per person and the maximum upstairs walking speed used in the software were identified to be noticeably different from the field studies. Predictions agreed better with the observations after tuning these two parameters. It is concluded that the evacuation simulation software can be applied for safety design with appropriate tuning on the key parameters through field tests.     

太钢安全工作新思路的尝试

太钢自1996年以来,开始了“大安全”工作思路,狠抓了人身安全,职业卫生安全,设备设施安全,生产组织安全,技术工艺安全,交通安全,消防安全,后勤保障安全,医疗卫生安全,环境保护,社会活动安全等,取得了很大效果。     

Ecological utilization of leather tannery waste with circular economy model

Circular economy (CE) focuses on resource-productivity and eco-efficiency improvement in a comprehensive way, especially on the industrial structure optimization of new technology development and application, equipment renewal and management renovation. The leather industry on the one side boosts the local economic development, on the other side however leads to the tremendous environment pollution and biological chains destruction. The CE model has been implemented as a new way of raw materials, water and energy consumption reduction in the leather industry. Reduce, Reuse, Recycle and Recover of the tannery effluents have been discussed in detail according to the different operation processes. The successful treatment approaches with analysis in the aspects such as wastewater, solid waste, sulfide, Chemical Oxygen Demand (COD), ammonium salt, chloride and chrome of the leather tannery with CE model provide guidance for the sustainable development of leather industry in the future.     

An empirical analysis on the impact of environmental regulations on pork trade:evidence from China

This paper uses the gravity model to examine the effect of environmental regulations on pork trade flows between different regions within China.We apply a linear programming tool to estimate pork trade flows from 2000 to 2008,and discuss the environmental acts on livestock pollution and income level to proxy environmental regulations.We use OLS regression and panel data with dummy variable in the cross-sectional GLS estimation.Our results indicate that the gap of environmental regulations between trade partners has a positive relationship with pork trade flows,and the difference in environmental regulations changes the traditional comparative advantage pattern to some extent.This paper provides convincing evidence for the pollution haven effect on livestock in China.     

Bioaccumulation of dichlorodiphenyltrichloroethanes (DDTs) in carp in a water/sediment microcosm: important role of sediment particulate matter and bioturbation

Environmental Science and Pollution Research - Sediments are reservoirs and sources of DDTs to the aquatic ecosystem. However, the role of sediment particulate matter and benthic organisms in...     

Can haze warning policy reduce traffic accidents: evidence from China

Environmental Science and Pollution Research - Haze pollution may decrease drivers’ driving performance by worsening their physical and psychological states. This paper explores the effects...     

Pyrolysis and dehalogenation of plastics from waste electrical and electronic equipment (WEEE): A review

Plastics from waste electrical and electronic equipment (WEEE) have been an important environmental problem because these plastics commonly contain toxic halogenated flame retardants which may cause serious environmental pollution, especially the formation of carcinogenic substances polybrominated dibenzo dioxins/furans (PBDD/Fs), during treat process of these plastics. Pyrolysis has been proposed as a viable processing route for recycling the organic compounds in WEEE plastics into fuels and chemical feedstock. However, dehalogenation procedures are also necessary during treat process, because the oils collected in single pyrolysis process may contain numerous halogenated organic compounds, which would detrimentally impact the reuse of these pyrolysis oils. Currently, dehalogenation has become a significant topic in recycling of WEEE plastics by pyrolysis. In order to fulfill the better resource utilization of the WEEE plastics, the compositions, characteristics and dehalogenation methods during the pyrolysis recycling process of WEEE plastics were reviewed in this paper. Dehalogenation and the decomposition or pyrolysis of WEEE plastics can be carried out simultaneously or successively. It could be ‘dehalogenating prior to pyrolysing plastics’, ‘performing dehalogenation and pyrolysis at the same time’ or ‘pyrolysing plastics first then upgrading pyrolysis oils’. The first strategy essentially is the two-stage pyrolysis with the release of halogen hydrides at low pyrolysis temperature region which is separate from the decomposition of polymer matrixes, thus obtaining halogenated free oil products. The second strategy is the most common method. Zeolite or other type of catalyst can be used in the pyrolysis process for removing organohalogens. The third strategy separate pyrolysis and dehalogenation of WEEE plastics, which can, to some degree, avoid the problem of oil value decline due to the use of catalyst, but obviously, this strategy may increase the cost of whole recycling process.