基于Pushover方法的中小学砌体结构抗震性能评估

针对中小学砌体结构教学楼的受力特点,提出横墙和开洞纵墙的等代框架模型,分析了模型的抗弯、抗剪和轴向刚度计算方法;结合国内外对钢筋混凝土结构性能水平的划分标准,将砌体结构的性能水平划分为正常使用、中等破坏和生命安全三个阶段,并通过对大量砌体墙片试验数据的统计,得出其各性能水平对应的层间位移角限值。最后利用所提模型对一砌体结构教学楼进行Pushover分析,将其实际层间位移与所提性能指标进行比较,结果表明结构在不同地震水平下均满足预定的性能目标。     

再论灾害研究的理论与实践

本文在作者１９９１年发表的“研究的现状与实践”一文基础上，全面分析了当前国外灾害理论研究的进展，对灾害理论研究中的２灾因子论，孕灾环境论，承灾体论进行了评述，并系统地阐述了区域灾害系统论的主要内容，即在综合分析组成区域灾害系统的致灾因子，孕灾环境，承灾体的基础上，通过对致灾因子的风险性评估，孕灾环境稳定性的分析，承灾体易损性的评价，揭示区域致灾与成灾过程中灾 情纬傻亩ρЩ?     

一种新型金属变摩擦耗能器的研发与应用

基于被动控制理论,提出一种新型的金属变摩擦耗能阻尼器。通过改变金属摩擦面的摩擦面积,使摩擦系数具有随位移改变而变化的特性。在金属摩擦学理论的基础上,建立了金属变摩擦耗能器的阻尼力计算模型与产品的开发。理论计算与实验数据表明:新型金属变摩擦耗能器的减震性能显著优于常规阻尼器,避免了传统阻尼装置(如油阻尼器)存在的造价高、维护复杂、易漏油的问题;克服了常规摩擦耗能器不能在不同大小荷载作用下保持同样控制效果的缺点,能做到抗震耗能器在不同荷载下保持很好的抗震效果,真正做到"小震小位移少耗能,大震大位移多耗能"的智能控制。     

柱生物曝气法吸附处理含铬废水

利用复合生物吸附剂FY01与活性污泥作为吸附材料,探讨了柱式生物曝气法对高浓度含铬电镀废水的生物吸附效果.研究结果表明,FY01性能稳定,耐进水pH冲击能力较强.当进水pH=2～5、流速为500 mL/h时,10 g FY01和5 g活性污泥联合处理60.4 mg/L含铬电镀废水2 h后,铬的去除率达78%以上;在4℃冰箱和23～28℃实验室保存50 d的FY01对铬的去除分别在78%～83%和77%～84%之间.柱式生物曝气吸附法对含铬废水的处理效果理想,运行稳定.串联处理2000 mL总Cr、Cu2 和COD浓度分别为60.4、4.51和48.2 mg/L的电镀废水2 h后,去除率分别高达92.1%、99.2%和71.4%.     

超声波/Fenton工艺降解微量邻苯二甲酸二甲酯和壬基酚效能的研究

研究了在超声波、Fenton不同体系中邻苯二甲酸二甲酯(DMP)和壬基酚(NP)的降解效果.通过正交实验得到超声波/Fenton工艺各个因素影响程度的大小为:H2O2投加量＞初始pH＞反应时间＞Fe2+投加量＞超声功率.最后得到降解250mL质量浓度为100 μg/L的DMP的最佳条件:H2 O2投加量为2 mmol/L、Fe2+投加量为0.40 mmol/L、初始pH为3.00、超声功率为1 800W、反应时间为120 min,降解率可达到85.96％;降解250mL质量浓度为100 μg/L的NP的最佳条件:H2O2投加量为4mmol/L、Fe2+投加量为0.50 mmol/L、初始pH为3.00、超声功率为1 800W、反应时间为120 min,降解率可达到78.70％.     

Status of trace elements in paddy soil and sediment in Taihu Lake region

Thirteen paddy soil profiles and river sediments which are sources of irrigation water were collected around the Taihu Lake, and the trace elements were estimated. The content of La and Ce in paddy soil and sediment were 39.3 and 68.6 mg/kg soil and 36.9 and 65.1 mg/kg soil, being within the range of background values. The values for Pb, Cu, Ni, Cr, Co, Mn, Zn, Se in paddy soil were 23.3, 27.8, 25.5, 63.5, 10.2, 386, 68.7 and 0.25 mg/kg soil respectively, all below the national permission level. There was a decline of Zn in paddy soil. Some of the river sediments were seriously polluted. The river in Yangjin site was most contaminated with 5.47 g Cu/kg and 7.4 g Zn/kg. The high concentration of Pb and Ni also was observed in this sediment. River in Weitang, Huashi, Xinzhuang and Meiyan were contaminated with Pb, Cu and Ni to some extent. Zn, Cu and Pb were the main pollutants in present experiment sites. The fast development of village/township industries have caused severe environmental pollution in the Taihu Lake region, especially irrigation river sediments. Se content in plant and seed was 0.04 and 0.03 mg/kg respectively, showed Se-deficiency in paddy soil in the Taihu Lake region.     

Positive matrix factorization as source apportionment of soil lead and cadmium around a battery plant (Changxing County,China)

Chemical compositions of soil samples are multivariate in nature and provide datasets suitable for the application of multivariate factor analytical techniques. One of the analytical techniques, the positive matrix factorization (PMF), uses a weighted least square by fitting the data matrix to determine the weights of the sources based on the error estimates of each data point. In this research, PMF was employed to apportion the sources of heavy metals in 104 soil samples taken within a 1-km radius of a lead battery plant contaminated site in Changxing County, Zhejiang Province, China. The site is heavily contaminated with high concentrations of lead (Pb) and cadmium (Cd). PMF successfully partitioned the variances into sources related to soil background, agronomic practices, and the lead battery plants combined with a geostatistical approach. It was estimated that the lead battery plants and the agronomic practices contributed 55.37 and 29.28 %, respectively, for soil Pb of the total source. Soil Cd mainly came from the lead battery plants (65.92 %), followed by the agronomic practices (21.65 %), and soil parent materials (12.43 %). This research indicates that PMF combined with geostatistics is a useful tool for source identification and apportionment.     

夏季富营养化滆湖中沉水植物群落重建及水质净化效果

通过滆湖原位围隔试验分析了不同单种及混种沉水植物群落随环境变化的生长状况及对水质的净化效果.结果表明:(1)夏季,沉水植物生物量的平均值与透明度/水位存在显著线性相关性,进一步表明沉水植物的生长在很大程度上依赖于光强和水深.(2)各植物区(除马来眼子菜区外)的高锰酸盐指数、TN高于空白对照区.(3)对比空白对照区,苦草...     

Carrousel氧化沟的流动特性研究

采用颗粒动态分析仪(PDA)对倒伞形表面曝气机曝气的Carrousel小试氧化沟进行测试,得出了氧化沟内较系统的流动特性参数.比较了固液两相在氧化沟内流动的差别,发现固液两相流动速度差别较小,由于惯性的影响,固相的沉降速度略大于液相.考察了表曝机的转速、表曝机相对于液面的位置、氧化沟的深度等因素对氧化沟内流动的影响,随着表曝机转速的增大和表曝机浸入液面深度的增加,流动速度和沉降速度均会增大,而氧化沟深度增加时,距离液面同一深度处的速度则会减小.实验结果与污水处理厂的实际情形进行比较发现,二者变化趋势一致,说明本实验结果可用于指导工程实际,为氧化沟的优化设计提供依据.     

催化湿式氧化技术处理山梨酸生产废水的研究

采用催化湿式氧化技术处理生产山梨酸过程中产生的高浓度有机废水,对催化剂组分进行优选.对反应温度、O2分压(Po2)和废水pH等工艺条件进行考察.实验结果表明:采用自制CuO-Cr2O3-La2O3/TiO2为复合催化剂处理该有机废水时表现出较好的催化活性;在190℃、Po2=2.1 MPa、pH=6.1、COD=10 030.0 mg/L时,反应90 min的COD去除率达到98.3%,而在相同条件下未加催化剂的湿式氧化的COD去除率只有60.1%.