Prioritizing groundwater remediation policies: a fuzzy compatibility analysis decision aid

The implementation of groundwater remediation strategies in contaminated areas includes not only a cost-benefit analysis and an environmental risk assessment but also another type of study called compatibility analysis. A compatibility analysis targets the interactions between remediation technologies and site characteristics, such as the types of active contaminants and their concentrations, soil composition and geological features, etc. The purpose of this analysis is to identify the most compatible remediation plan for the contaminated site. In this paper, we introduce a decision support system for the prioritization of remediation plans based on their estimated compatibility index. As this model receives data in terms of linguistic judgments and experts' opinions, we use fuzzy sets theory to deal with these uncertainties. First, we break down the concept of compatibility into the measurable factors. Then by using a multiple-attribute decision-making (MADM) outline, we compute a factorial, regional and overall compatibility indicator for each plan. Finally, by comparing these generated indicators, we rank the remediation policies.     

略论清代自然资源的保护与利用

清代在水土资源、林木资源、矿产资源的保护与利用等方面采取了积极有效的措施，包括开垦土地、兴修水利、发展生态农业、植树造林、加强法制、设立环保机构等。     

岷江生态环境问题及其对策研究

本文主要探讨岷江流域的生态环境问题及其对策。全文分为两个部分。(1)研究岷江生态环境问题;(2)解决岷江生态环境问题的主要对策。     

对钻井废物污染的全过程控制

在钻井作业过程中控制废物的排放量和毒性，变末端处理为全过程控制，采取各种措施预防钻井废物的污染是近年来国外油气田环保工作的一项重要内容。本文就采用小井眼钻井工艺；减少井眼冲蚀；强化环境管理；提高钻井液固控系统的处理效率；开发各种合成基钻井液；采用低毒无害的钻井液化学添加剂等６个方面讨论了减少钻井废物产生量的途径和降低钻井液及添加剂对环境的影响     

堇青石负载Pd和过渡金属氧化物催化剂的表征及其对CO的催化氧化活性

以堇青石蜂窝陶瓷(CC)为载体,采用浸渍法制备了堇青石负载Pd和过渡金属混合氧化物催化剂,记作Pd-M-Mn(M=Cu,Co,Fe,Ni)/CC。实验结果表明:Pd-Co-Mn/CC催化剂的催化活性最高;随着Pd负载量的增加,CO转化率提高;当Pd负载量为1.00%时,反应温度为150℃时CO转化率达到98%,200℃时CO转化率达到100%;在反应温度150℃条件下,Pd-Co-Mn/CC催化剂(Pd负载量1.00%)的CO转化率在前30h内小幅度下降,随后稳定在90%以上,反应100h后,催化剂表面颜色由黑色变为棕褐色。     

回收与降解聚驱采出水的工艺探讨

含聚污水的处理是困扰石油行业的难题之一。基于聚驱采出水的特点,围绕聚合物的回收利用和降解理论及技术,探讨国内外含聚污水处理技术的研究与应用现状,对比分析现有处理技术存在的问题及适应性,提出采用化学混凝、气浮和水质改性等技术来回收利用PAM(聚丙烯酰胺)的新思路,打破了降解PAM的传统思维,同时分析含聚污水处理与利用技术的可行性与应用前景,有望实现含聚污水的循环利用。     

聚苯硫醚(PPS)掺炭纤维协同飞灰脱除气态汞的实验研究

利用汞蒸气发生器产生的单质汞和烟气中的一些主要气体成分模拟烟气条件,在固定床实验系统上分别进行了燃煤飞灰、聚苯硫醚(PPS)掺炭纤维及燃煤飞灰和PPS掺炭纤维联合对燃煤烟气中Hg0的脱除实验研究.结果表明:燃煤飞灰和PPS掺炭纤维对Hg0的吸附是物理吸附和化学吸附的共同结果,它们各自的脱汞效率分别可达27%和65%左右...     

One-step synthesis of Cu(II) metal–organic gel as recyclable material for rapid, efficient and size selective cationic dyes adsorption

Efficient removal of non-biodegradable and hazardous dyes from wastewater remains a hot research topic. Herein, a rationally designed a Cu(Ⅱ)-based metal–organic gel(Cu-MOG) with a nanoporous 3 D network structure prepared via a simple one-step mixing method was successfully employed for the removal of cationic dyes. The Cu-MOG exhibited high efficiency, with an adsorption capacity of up to 650.32 mg/g, and rapid adsorption efficiency, with the ability to adsorb 80% of Neutral Red within 1 min. The high adsorption efficiency was attributed to its large specific surface area, which enabled it to massively bind cationic dyes through electrostatic interaction, and a nanoporous structure that promoted intra-pore diffusion. Remarkably, the Cu-MOG displayed size-selective adsorption, based on adsorption studies concerning dyes of different sizes as calculated by density functional theory. Additionally, the adsorption performance of the Cu-MOG still maintained removal efficiency of 100% after three regeneration cycles. These results suggested that the Cu-MOG could be expected to be a promising and competitive candidate to conveniently process wastewater.     

重金属污染土壤接种丛枝菌根真菌对蚕豆毒性的影响

采用盆栽实验的方法,研究了重金属(包括Cu、Zn、Pb和Cd)复合污染和接种丛枝菌根真菌(arbuscular mycorrhizal fungi,AMF)Glomus mosseae对蚕豆(Vicia faba)生长及DNA损伤的影响.结果表明,虽然接种菌根真菌对蚕豆生物量的影响并不显著,但是却显著影响植物对重金属的吸收,接种菌根真菌对蚕豆吸收4种重金属元素的作用有差异.采用单细胞凝胶电泳(single cell gel electrophoresis,SCGE)法研究接种菌根真菌对蚕豆叶片的DNA损伤的影响,与重金属吸收的结果相吻合.结果表明,接种处理可显著增加蚕豆叶片的DNA损伤程度,这与接种处理可提高植物的重金属吸收相一致.     

Recovery of Cu and Fe from Printed Circuit Board waste sludge by ultrasound: Evaluation of industrial application

The paper presents a novel cleaner process for metal recovery from the Printed Circuit Board (PCB) waste sludge by assistance of ultrasound. The process can effectively recover heavy metals at low cost with high separation and recovery efficiency, produce high quality products and also achieve zero waste discharge with operation at industrial scale. With the PCB waste sludge containing (wet content) 3.14–4.85% copper and 3.71–4.23% iron, copper recovery efficiency of 95.2–97.5% and iron recovery efficiency of 97.1–98.5% were achieved, while the purity of copper sulfate produced by the process was 98.0% and the produced ferric chloride had a satisfied quality for using as a coagulant material for the plant on-site wastewater treatment. The process had been successfully scaled up to the industrial scaled applications in a heavy metal recovery plant in city of Huizhou, China for more than two years. The novel cleaner heavy metal recovery process has a great prospect on the applications of resources recovery and environmental protection practices.