重金属污染土壤接种丛枝菌根真菌对蚕豆毒性的影响

采用盆栽实验的方法,研究了重金属(包括Cu、Zn、Pb和Cd)复合污染和接种丛枝菌根真菌(arbuscular mycorrhizal fungi,AMF)Glomus mosseae对蚕豆(Vicia faba)生长及DNA损伤的影响.结果表明,虽然接种菌根真菌对蚕豆生物量的影响并不显著,但是却显著影响植物对重金属的吸收,接种菌根真菌对蚕豆吸收4种重金属元素的作用有差异.采用单细胞凝胶电泳(single cell gel electrophoresis,SCGE)法研究接种菌根真菌对蚕豆叶片的DNA损伤的影响,与重金属吸收的结果相吻合.结果表明,接种处理可显著增加蚕豆叶片的DNA损伤程度,这与接种处理可提高植物的重金属吸收相一致.     

CO2捕集回收技术研究

主要介绍了常用的胺化合物吸收法、钙基吸收剂法、金属氧化物法等CO2捕集回收技术的最新研究进展及存在的问题,综合对比了各种方法的优缺点:胺化合物吸收法吸收速率快,但再生能耗较高,因此开发"高效低耗"的复合吸收剂成为研究的重点;钙基吸收剂法在高温环境下对CO2的吸收有较好的效果,但吸收剂的碳酸化转化率及热稳定性是有待解决的关键问题;金属氧化物法具有高的CO2吸收效率,但成本较高.在此基础上,探索了CO2捕集回收技术改进工艺,提出改善吸收剂性能、开发高效低耗的CO2选择性吸收剂将成为今后CO2捕集回收技术的研究方向.     

电除尘器气流分布试验研究和数值计算

结合660 WM机组电除尘器的设计要求,对电除尘器内气流流动进行了数值模拟与试验研究.计算中选择SIMPLE方法求解三维雷诺平均方程和κ-ε两方程湍流模型.研究结果表明,无论电除尘器两室流量分配还是第一电场进口断面气流分布,计算结果与试验吻合较好,数值计算结果可以指导电除尘器设计与模型试验研究.     

陶瓷膜生物反应器处理生活污水膜污染机理的研究

采用一个经典模型描述了陶瓷膜生物反应器处理生活污水过程中的通量衰减,通过模型参数分析了膜的污染机理.分析结果表明,孔径为50、200和500 nm的陶瓷膜主要由"部分孔堵塞"机理、"完全孔堵塞"机理和"部分孔堵塞"机理控制.实验表明,孔径为200 nm的陶瓷膜较适用于陶瓷膜生物反应器体系.     

PAC-chitosan复合絮凝剂中铝形态

以不同碱化度(B)的聚合氯化铝(PAC)和不同粘度的壳聚糖为原料制备出一系列PAC-chitosan复合絮凝剂。采用Al-Ferron逐时络合比色法研究了PAC-chitosan复合絮凝剂中铝的形态分布,探讨了PAC的B值、壳聚糖的含量（C）和粘度（η）对复合絮凝剂中铝的形态分布的影响。结果表明：壳聚糖与PAC之间发生了一定的相互作用,通过试验结果推断出当B=1.5,壳聚糖粘度η=800 Pa·s,C=0.6 mg/mL絮凝效果最佳。并用某造纸废水进行了烧杯絮凝试验。絮凝试验结果与推断结果相一致。     

地震现场数据共享标准化研究及其标准起草

标准化被普遍认为是保证信息更有效处理、交换、管理以及消除技术壁垒的最有效手段.信息共享标准是为规范信息共享的行为而制订的,是实现信息共享的"软"环境.通过对地震现场信息共享标准化研究,概述了这一标准制定的过程、总体内容框架安排的一些考虑以及存在问题,讨论了地震现场信息共享标准分类与编码体系、数据交换格式、元数据、数据字典及数据质量控制等与信息共享标准相关的一些问题.     

岩体开挖卸荷过程力学特性分析

基于岩体开挖卸荷过程中力学参数变化理论的分析研究,建立卸荷岩体有限元分析模型,运用ADINA有限元分析软件对岩体进行一维卸荷数值仿真研究。根据有限元数值分析计算成果得到岩体力学参数与主卸荷方向累计开挖卸荷量间的变化关系曲线。结果表明:岩体开挖卸荷过程中,岩体力学参数变形模量、泊松比、粘聚力和内摩擦角等呈现出随开挖卸荷量的变化而发生变化的特征,随卸荷量的增大有减小的趋势,但它们不是从初始值一直减小到零,而是随卸荷量的增大减小到一定的量值后,岩体的裂隙张开、结构面的扩展到一定的程度,岩体的力学参数保持一定的量级不再减小。     

Influence of metal ion on sorption of p-nitrophenol onto sediment in the presence of cetylpyridinium chloride

Heavy metals and surfactants have a significant effect on the sorption of organic contaminants. In this study, batch equilibrium experiments were carried out to investigate the influence of Pb(NO(3))(2) on the sorption of p-nitrophenol (PNP) onto sediments in the presence of cationic surfactant cetylpyridinium chloride (CPC). Results indicated that in the complex system containing PNP, Pb(NO(3))(2) and CPC, the sorption of PNP decreased with increasing concentration of Pb(NO(3))(2) due primarily to competing for adsorption sites. Likewise, partitioning of PNP in adsorbed surfactant layers and micelles decreased with increasing level of Pb(NO(3))(2). Moreover, the influence of different metal ions (Pb(2+), Cd(2+), Zn(2+)) was examined and results indicated that the presence of heavy metals inhibited the sorption of PNP in the order: Pb(2+)>Cd(2+)>Zn(2+). The competitive effect of the heavy metals was in agreement with the hydration energy and hydrated radius. The results are believed to provide a useful insight into describing the transport and fate of PNP in natural environments.     

A full-scale sequencing batch reactor system for swine wastewater treatment

A full-scale sequencing batch reactor (SBR) system was evaluated for its ability to remove carbon and nitrogen from swine wastewater. The SBR was operated on four, six-hour cycles each day, with each cycle consisting of 4.5 hours of "React," 0.75 hours of "Settling", 0.75 hours for "Draw" and "Fill." Within each cycle, an amount of wastewater equivalent to about 5% of the reactor volume (5,500 litres) was removed and added. The SBR system was able to remove 82% of biochemical oxygen demand (BOD) and more than 75% of nitrogen. Even though the SBR effluent, with an average effluent BOD5 of about 588 mg L(-1), did not meet the discharge criteria, it enabled a reduction of the land base required for land application of swine wastewater by about 75%. Results indicated that the SBR system was a viable method for the treatment of swine wastewater.     

Survey of heavy metal pollution and assessment of agricultural soil in Yangzhong district, Jiangsu Province, China

We investigated concentrations of Hg, Cd, Pb, Zn, Cu, As, Ni, and Cr in samples of soil, cereal, and vegetables from Yangzhong district, China. Compared to subsoils, the sampled topsoils are enriched in Hg, Cd, Cu, Pb, Zn, and As. High levels of Cd and Hg are observed in most agricultural soils. Concentrations of Cr and Ni show little spatial variation, and high Cu, Pb, and Zn contents correspond well to areas of urban development. High As contents are primarily recorded at the two ends of the sampled alluvion. The contents of Cd, Hg, and total organic carbon (TOC) increase gradually to maximum values in the upper parts of soil profiles, while Cr and Ni occur in low concentrations within sampled profiles. As, Pb, Cu, and Zn show patterns of slight enrichment within the surface layer. Compared to data obtained in 1990, Cd and Hg show increased concentrations in 2005; this is attributed to the long-term use of agrochemicals. Cr and Ni contents remained steady over this interval because they are derived from the weathering of parent material and subsequent pedogenesis. The measured As, Cu, Pb, and Zn contents show slight increases over time due to atmospheric deposition of material sourced from urban anthropogenic activity. Low concentrations of heavy metals are recorded in vegetables and cereals because the subalkaline environment of the soil limits their mobility. Although the heavy metal concentrations measured in this study do not pose a serious health risk, they do affect the quality of agricultural products.