矿区农业生态环境评价信息系统设计与实现

文章在介绍和评价了矿区农业生态环境评价指标体系的建立、评价方法的基础上,重点阐述了矿区农业生态环境评价信息系统的需求分析、数据库设计及用户管理子系统、环境评价子系统、地图操作子系统、帮助子系统、输出子系统的功能设计和特点,最后对系统的应用及前景做了说明和展望。     

宿迁市公众环境意识调查研究

采用问卷调查与社会访问相结合的方法,对江苏省宿迁市居民的环境意识进行了调查。统计结果表明宿迁市居民对当地环境处于基本满意阶段,并认为政府对环境保护工作比较重视;宿迁市公众具备了一定的环境保护基础知识．但是环境意识比较低,环境保护行为相对滞后,需要政府加以引导,加强环境宣传教育,提高民众的环境意识。     

基于分形方法确定合肥大兴地区土壤中Cd元素的异常下限

在土壤元素异常下限值的确定对环境地球化学评价具有重要意义,传统异常下限值计算方法仅适用于元素含量数据呈正态分布的情况,而事实上土壤元素含量的空间分布极其复杂,很可能具有多重分形分布特征,元素背景和异常有各自独立的幂指数关系。本文探讨利用分形方法确定典型工业区土壤中Cd元素的异常下限值。基于分形的含量一面积方法确定了合肥大兴地区（典型工业区）土壤中污染元素Cd的异常下限值为0．445mg／kg,并根据该异常下限值圈定了异常范围。同时与传统方法（平均值加两倍标准离差）确定的土壤中Cd元素异常下限值及异常范围进行了对比分析,结果显示,分形方法圈定的异常区域是有效的、合理的,控制了区内主要的导致土壤Cd元素污染的企业。     

A mini-microbial fuel cell for voltage testing of exoelectrogenic bacteria

Current methods for testing the electricity generation capacity of isolates are time- and labor-consuming. This paper presents a rapid voltage testing system of exoelectrogenic bacteria called Quickscreen, which is based on a microliter microbial fuel cell (MFC). Geobacter sulfurreducens and Shewanella baltica were used as the model exoelectrogenic bacteria; Escherichia coli that cannot generate electricity was used as a negative control. It was found that the electricity generation capacity of the isolates could be determined within about five hours by using Quickscreen, and that its time was relatively rapid compared with the time needed by using larger MFCs. A parallel, stable, and low background voltage was achieved using titanium as a current collector in the blank run. The external resistance had little impact on the blank run during the initial period. The cathode with a five-hole configuration, used to hydrate the carbon cathode, gave higher cathode potential than that with a one-hole configuration. Steady discharge and current interrupt methods showed that the anode mostly contributed to the large internal resistance of the Quickscreen system. However, the addition of graphite felt decreased the resistance from 18 to 5 kΩ. This device was proved to be useful to rapidly evaluate the electricity generation capacity of different bacteria.     

Selective sorption of perfluorooctane sulfonate on molecularly imprinted polymer adsorbents

Perfluorooctane sulfonate (PFOS), as a potential persistent organic pollutant, has been widely detected in water environments, and has become a great concern in recent years. PFOS is very stable and difficult to decompose using conventional techniques. Sorption may be an attractive method to remove it from water. In this study, the molecularly imprinted polymer (MIP) adsorbents were prepared through the polymerization of 4-vinylpyridine under different preparation conditions in order to remove perfluorooctane sulfonate (PFOS) from water. The MIP adsorbents using perfluorooctanoic acid (PFOA) as the template had good imprinting effects and could selectively remove PFOS from aqueous solution. The sorption behaviors including sorption kinetics, isotherms, and effect of pH, salt, and competitive anions were investigated. Experimental results showed that the sorption of PFOS on the MIP adsorbents was very fast, pH-dependent, and highly selective. The achieved fast sorption equilibrium within 1 h was attributed to the surface sorption on the fine adsorbents. The sorption isotherms showed that the sorption selectivity of PFOS on the MIP adsorbents decreased at high PFOS concentrations, which may be due to the double-layer sorption and the formation of PFOS micelles on the sorbent surface. The sorption of PFOS on the MIP adsorbents was mainly dominated by the electrostatic interaction between the protonated vinylpyridine on the adsorbent surface and the anionic PFOS. The prepared MIP adsorbents can potentially be applied in water and wastewater treatment for selective removal of PFOS.     

水中总氰化物含量测量不确定度的评定

采用异烟酸-吡唑啉酮分光光度法对水中总氰化物进行不确定度评定。充分考虑测量重复性、标准溶液的配制、标准曲线的制备等因素对测量的影响,测得总氰化物的相对合成标准不确定度为1．75×10^-2。     

FIA技术在水质监测分析中的应用

通过使用Lachat流动注射分析仪测定环境水样中的四个常规项目总磷、总氮、挥发酚和总氰来介绍兀A技术在水质分析领域的应用。实验结果表明,各项目的标样测定值均在保证值范围之内,相对标准偏差在0．2％-3．7％之间。方法的精密度及准确度较好,加标回收率在91％-102％之间,满足水质监测实验室质量控制的要求。     

流动注射法测定水中高锰酸盐指数的研究

研究了用流动注射分析技术测定水体中高锰酸盐指数。使用新发明的耐腐蚀恒流泵、低记忆高效混合器、不存留气泡流通池等部件,通过高温高压,缩短消解时间,从而建立了一种可用于无人值守的自动在线快速监测水体中高锰酸盐指数的分析方法。通过实验研究了流动注射法测定水中高锰酸盐指数的优越性。对方法的检出限、精密度和准确度进行了测定,并与GB／T11892—89《水质高锰酸盐指数的测定》进行了比对,取得了满意的结果。     

工业污染防治主要措施回顾性评价

随着经济和社会高速发展,工业污染控日趋严重,工业污染物排放量处于较高水平,在一些地区大大超过环境承栽能力。要综合解决目前中国在发展中面临的资源浪费和环境污染等比较突出的问题,唯一出路就是建立资源节约型工业生产体系,走新型工业化道路,这是实现中国经济可持续发展战略的关键所在。污染防治措施回顾评价的基本目的,是通过对各省市工业经济生产状况的调查和分析,评价工业污染防治措施实施的效果,并提出改善污染防治措施的建议,以期防治污染和其他公害,保护和改善生活环境与生态环境,保障人体健康,促进经济、社会的可持续发展。     

大水量下快速提取悬浮物的方法研究

针对大量水体中悬浮物的提取,提出了一泵三瓶滤网覆盖抽滤法,该方法是在传统滤膜抽滤法的基础上,在滤膜的下面,增设了一张尼龙滤网,滤网的大小刚好覆盖布氏漏斗的抽滤小孔,并采用一台真空泵带动三个抽滤瓶。实践证明,一泵三瓶滤网覆盖抽滤法的抽滤速度是传统抽滤方法的7倍多,并且能够减少在抽滤过程中由于抽滤时间过长而导致的悬浮物的质量损失。因此,该方法能够大大提高抽滤的效率,缩短抽滤的时间,加快实验的进程,对大范围内的水体监测工作具有重要的现实意义。