Effects of visible light radiation on macrophyte litter degradation and nutrient release in water samples from a eutrophic shallow lake

Visible light is a major fraction of the solar spectrum; however, information on visible light radiation of macrophyte detritus is lacking. In this study, we conducted a microcosm experiment to assess the effects of visible light radiation on degradation of two litter species: Potamogeton malaianus (P. malaianus) and Phragmites australis (Ph. australis). This research represents an investigation of mass loss, microbial activity and nutrients released over a period of 168 days. Overall, we found that visible light radiation had significant effects on litter decomposition, but it did not affect the microbial activities which degrade cellulose and lignin. The decomposition rate order of the three components in P. malaianus and Ph. australis in treatments was: cellulose?>?hemicellulose?>?lignin. The visible light radiation mainly affected the degradation of lignin, which is the primary compound in litter susceptible to photodegradation. The exposure to visible light radiation up to 17.6?Wm^?2 stimulated the dissolved organic carbon release and reduced the molecular weight to less reactive. Meanwhile, no obvious difference in nutrient contents (TP, TN, NO₃–N, NO₂–N, and NH₃–N) was observed among different visible light intensities. The results of this study contribute to better understanding of the photochemical behaviour of macrophyte litter in shallow lakes.     

Recent advances in the photocatalytic reduction of carbon dioxide

Fossil fuels are currently the major energy source and are rapidly consumed to supply the increasing energy demands of mankind. CO₂, a product of fossil fuel combustion, leads to climate change and will have a serious impact on our environment. There is an increasing need to mitigate CO₂ emissions using carbon–neutral energy sources. Therefore, research activities are devoted to CO₂ capture, storage and utilization. For instance, photocatalytic reduction of CO₂ into hydrocarbon fuels is a promising avenue to recycle carbon dioxide. Here we review the present status of the emission and utilization of CO₂. Then we review the photocatalytic conversion of CO₂ by TiO₂, modified TiO₂ and non-titanium metal oxides. Finally, the challenges and prospects for further development of CO₂ photocatalytic reduction are presented.     

亚热带水库沉积物钻孔中有机质的历史记录及其环境意义

氢指数(HI)是重要的有机质评价参数,能够反映沉积有机质中脂肪大分子物质的相对含量,并用于反演水生生态系统的历史初级生产力,有助于研究藻类生产力对污染物的富集作用。为了探讨氢指数的环境指示作用,选择了亚热带的3座水库作为研究对象,采用Rock-Eval热解与生物标志物-中性糖方法相结合的研究技术,研究了沉积钻孔有机质的来源与特征;并结合210Pb和137Cs定年技术,综合运用氢指数和总糖含量对水库的初级生产力进行了重建。结果表明:中富营养的增塘和联安水库沉积有机质主要来源于浮游藻类,且受降解的程度较小,而贫营养的新丰江水库钻孔下层有机质主要是受降解作用或陆源高等植物等的影响。近年来,3个水库的HI值都有显著性的增加,且与其对应的总糖含量以及近50年来的滑动平均温度都高度的相关,说明这些水库都经历了气候变暖所引起的初级生产力增长。同时,升高的水库生产力扩大了沉积物剖面中重金属和多环芳烃的累积。     

浓度效应对卡马西平在生物炭上的吸附动力学影响

为了解人工合成药物在生物炭上的吸附动力学特征及其浓度效应的影响,选择卡马西平(CBZ)为目标污染物。探讨不同初始质量浓度(2、4、25、50 mg·L~(-1))在不同裂解温度(200、300、500℃)下制备的生物炭上的吸附动力学特征。结果表明,双室一级动力学模型可以精确地描述CBZ在生物炭上的吸附动力学特征。CBZ的快室吸附对总体吸附的贡献随初始浓度的增大而减小,而慢室吸附贡献则增大。π-π作用可能对CBZ的吸附贡献较大。孔隙填充可以描述慢室吸附过程,可能是吸附速率的控制环节。     

Fe-Mn-sepiolite as an effective heterogeneous Fenton-like catalyst for the decolorization of reactive brilliant blue

A study of the decolorization of reactive brilliant blue in an aqueous solution using Fe-Mn-sepiolite as a heterogeneous Fenton-like catalyst has been performed. The Fourier transform infrared (FTIR) spectra of the catalyst showed bending vibrations of the Fe-O. The X-ray diffraction (XRD) patterns of the catalyst showed characteristic diffraction peaks of α-Fe₂O₃, γ-Fe₂O₃ and MnO. A four factor central composite design (CCD) coupled with response surface methodology (RSM) was applied to evaluate and optimize the important variables (catalyst addition, hydrogen peroxide dosage, initial pH value and initial dye concentration). When the reaction conditions were catalyst dosage= 0.4 g, [H₂O₂]= 0.3 mL, pH= 2.5, [reactive brilliant blue]_o = 50 mg·L⁻¹, and volume of solution= 500 mL at room temperature, the decolorization efficiency of reactive brilliant blue was 91.98% within 60 min. Moreover, the Fe-Mn-sepiolite catalyst had good stability for the degradation of reactive brilliant blue even after six cycles. Leaching of iron ions (<0.4 mg·L⁻¹) was observed. The decoloring process was reactive brilliant blue specific via a redox reaction. The benzene ring and naphthalene ring were first oxidized to open ring; these were then oxidized to the alcohol and carboxylic acid. The reactive brilliant blue was decomposed mainly by the attack of ·OH radicals including surface-bound ·OH radicals generated on the catalyst surface.     

Improved blending strategy for membrane modification by virtue of surface segregation using surface-tailored amphiphilic nanoparticles

Membrane modification is one of the most feasible and effective solutions to membrane fouling problem which tenaciously hampers the further augmentation of membrane separation technology. Blending modification with nanoparticles (NPs), owing to the convenience of being incorporated in established membrane production lines, possesses an advantageous viability in practical applications. However, the existing blending strategy suffers from a low utilization efficiency due to NP encasement by membrane matrix. The current study proposed an improved blending modification approach with amphiphilic NPs (aNPs), which were prepared through silanization using 3-(Trimethoxysilyl)propyl methacrylate (TMSPMA) as coupling agents and ZnO or SiO₂ as pristine NPs (pNPs), respectively. The Fourier transform infrared and X-ray photoelectron spectroscopy analyses revealed the presence of appropriate organic components in both the ZnO and SiO₂ aNPs, which verified the success of the silanization process. As compared with the pristine and conventional pNP-blended membranes, both the ZnO aNP-blended and SiO₂ aNP-blended membranes with proper silanization (100% and 200%w/w) achieved a significantly increased blending efficiency with more NPs scattering on the internal and external membrane surfaces under scanning electron microscope observation. This improvement contributed to the increase of membrane hydrophilicity. Nevertheless, an extra dosage of the TMSPMA led to an encasement of NPs, thereby adversely affecting the properties of the resultant membranes. On the basis of all the tests, 100% (w/w) was selected as the optimum TMSPMA dosage for blending modification for both the ZnO and SiO₂ types.

Open image in new window

     

Wastewater-nitrogen removal using polylactic acid/starch as carbon source: Optimization of operating parameters using response surface methodology

The use of PLA/starch blends for nitrogen removal was achieved. The influence of different operating parameters on responses was verified using RSM. The conditions for desired responses were successfully optimized simultaneously. Blends material may have a promising application prospect in the future. Nitrogen removal from ammonium-containing wastewater was conducted using polylactic acid (PLA)/starch blends as carbon source and carrier for functional bacteria. The exclusive and interactive influences of operating parameters (i.e., temperature, pH, stirring rate, and PLA-to-starch ratio (PLA proportion)) on nitrification (Y₁), denitrification (Y₂), and COD release rates (Y₃) were investigated through response surface methodology. Experimental results indicated that nitrogen removal could be successfully achieved in the PLA/starch blends through simultaneous nitrification and denitrification. The carbon release rate of the blends was controllable. The sensitivity of Y₁, Y₂, and Y₃ to different operating parameters also differed. The sequence for each response was as follows: for Y₁, pH>stirring rate>PLA proportion>temperature; for Y₂, pH>PLA proportion>temperature>stirring rate; and for Y₃, stirring rate>pH>PLA proportion>temperature. In this study, the following optimum conditions were observed: temperature, 32.0°C; pH 7.7; stirring rate, 200.0 r·min^-1; and PLA proportion, 0.4. Under these conditions, Y₁, Y₂, and Y₃ were 134.0 μg-N·g-blend^-1·h^-1, 160.9 μg-N·g-blend^-1·h^-1, and 7.6 × 10³ μg-O·g-blend^-1·h^-1, respectively. These results suggested that the PLA/starch blends may be an ideal packing material for nitrogen removal.     

一种PM_(2.5)辅助监测系统的设计与实现

为解决目前国内外PM2.5监测仪器价格昂贵,运行成本高,单点负责区域大,监测点少的问题,提出以国家监测网络为基础,以低成本、高精度为特点的PM2.5辅助监测方法。系统采用DSM501A作为PM2.5浓度采集传感器,完成粒子数量浓度到质量浓度的转换,通过在一定区域内布置监测终端,并借助于GPRS网络和参数曲面构建方法,建立了一定区域内PM2.5质量浓度网络图,填补了国家监测点间的监测盲区,并利用高斯消元法建立了从历史数据到未来浓度的预测算法。实验结果表明:实测数据与国家监测点数据基本一致,具有广阔的应用前景。     

电视、中波发射塔对电磁辐射环境的影响

通过对包头市城区历年的电磁环境监测,以及电视和中波发射塔周围电磁辐射情况,了解其环境质量状况和主要污染源。历年环境监测综合场强为0.30~0.47 V/m,年平均值为0.41 V/m。而广播和电视发射塔因距离而异,它们综合场强均值分别为1.26~3.43 V/m、1.44~5.34 V/m。虽然这些监测值都在标准限值之内,但可以看出广播和电视发射塔对电磁辐射综合场强的影响极大。     

BS EN ISO 20345：2011《个体防护装备安全鞋》标准的解析和建议

本文通过对最新的BS EN ISO 20345：2011《个体防护装备安全鞋》标准的列表介绍和概括性分析,找出了新标准检测项目仍存在的遗留问题和未考虑到的缺陷以及需要界定的术语,并提出了今后标准的再修订意见。此再修订意见的给出,为推动今后与安全鞋标准BS EN ISO 20345：2011属于同一体系的我国GB 21148-2007《个体防护装备安全鞋》标准修订提供参考意见。