Highly catalytic activity of Mn/SBA-15 catalysts for toluene combustion improved by adjusting the morphology of supports

Rod-like, hexagonal and fiber-like SBA-15 mesoporous silicas were synthesized to support MnO_x for toluene oxidation. This study showed that the morphology of the supports greatly influenced the catalytic activity in toluene oxidation. MnO_x supported on rod-like SBA-15(R-SBA-15) displayed the best catalytic activity and the conversion at 230°C reached more than 90%, which was higher than the other two catalysts. MnO_x species consisted of coexisting MnO_2 and Mn_2O_3 on the three kinds of SBA-15 samples. Large amounts of Mn_2O_3 species were formed on the surface and high oxygen mobility was obtained on MnO_x supported on R-SBA-15, according to the H_2 temperature programmed reduction(H_2-TPR)and X-ray photoelectron spectroscopy(XPS) results. The Mn/R-SBA-15 catalyst with greater amounts of Mn_2O_3 species possessed a large amount of surface lattice oxygen, which accelerated the catalytic reaction rate. Therefore, the surface lattice oxygen and high oxygen mobility were critical factors on the catalytic activity of the Mn/R-SBA-15 catalyst.     

One-step synthesis of Cu(II) metal–organic gel as recyclable material for rapid, efficient and size selective cationic dyes adsorption

Efficient removal of non-biodegradable and hazardous dyes from wastewater remains a hot research topic. Herein, a rationally designed a Cu(Ⅱ)-based metal–organic gel(Cu-MOG) with a nanoporous 3 D network structure prepared via a simple one-step mixing method was successfully employed for the removal of cationic dyes. The Cu-MOG exhibited high efficiency, with an adsorption capacity of up to 650.32 mg/g, and rapid adsorption efficiency, with the ability to adsorb 80% of Neutral Red within 1 min. The high adsorption efficiency was attributed to its large specific surface area, which enabled it to massively bind cationic dyes through electrostatic interaction, and a nanoporous structure that promoted intra-pore diffusion. Remarkably, the Cu-MOG displayed size-selective adsorption, based on adsorption studies concerning dyes of different sizes as calculated by density functional theory. Additionally, the adsorption performance of the Cu-MOG still maintained removal efficiency of 100% after three regeneration cycles. These results suggested that the Cu-MOG could be expected to be a promising and competitive candidate to conveniently process wastewater.     

Contribution of the Kodama and 4S pathways to the dibenzothiophene biodegradation in different coastal wetlands under different C/N ratios

Dibenzothiophene (DBT) degradation mechanisms and the transformation of pathways during the incubation of three types of coastal sediments with C/N ratios ranging from 1 to 9 were investigated. The DBT degradation efficiencies were clearly improved with increasing C/N ratio in reed wetland sediments, tidal wetlands sediments and estuary wetland sediments. The quantitative response relationships between DBT degradation rates and related functional genes demonstrate that the Kodama pathway-related gene groups were dominant factors at low C/N ratios, while the 4S-related gene groups mainly determined the degradation rate when the C/N ratio was up to 5. Network analysis also shows that the pathway shifts from the Kodama pathway to the 4S pathway occurred through changes in the connections between functional genomes and rates. Furthermore, there were competition and collaboration between the Kodama and 4S pathways. The 4S pathway-related bacteria were more active in estuary wetland sediments compared with reed wetland sediments and tidal wetland sediments. The higher degradation efficiency in estuary wetland sediments may indicate the greater participation of the 4S pathway in the DBT biodegradation reaction. And the effects of ring cleavage of Kodama pathway caused more complete metabolizing of DBT.     

Female sex pheromone of Ostrinia orientalis – throwing a light on the relationship between O. orientalis and the European corn borer, O. nubilalis

Summary. The sex pheromone of Ostrinia orientalis (Lepidoptera: Crambidae) was analyzed by gas chromatography–electroantennographic detection (GC–EAD), GC–mass spectrometry and a series of bioassays. Three EAD-active compounds were detected in the female sex pheromone gland extract, and identified as tetradecyl acetate (14:OAc), (Z)-11-tetradecenyl acetate (Z11-14:OAc) and (E)-11-tetradecenyl acetate (E11-14:OAc). The titers (ratio) of 14:OAc, Z11-14:OAc and E11-14:OAc in 3-day-old virgin females were 0.49 ng (10), 4.86 ng (98) and 0.10 ng (2), respectively. In a wind-tunnel bioassay, the 98:2 blend of Z11- and E11-14:OAc, but not Z11-14:OAc alone, elicited the same male behavioral responses as virgin females and crude gland extracts. 14:OAc was inactive by itself, and did not show any synergistic effect on the binary blend. Field trapping experiments also confirmed the attractiveness of the binary blend to O. orientalis males. Based on these results, we concluded that the sex pheromone of O. orientalis is a 98:2 mixture of Z11-14:OAc and E11-14:OAc. This sex pheromone is very similar to that of the Z-type European corn borer, O. nubilalis. The present finding raises the question of whether O. orientalis , which is indistinguishable from O. nubilalis based on external morphology, is a biologically distinct species independent from O. nubilalis.     

江苏台网尾波持续时间震级的初步研究

利用江苏台网15个地震台的84个地震DD-1短周期记录资料,通过m_(Lg)震级与持续时间τ和震中距Δ相关,得出该区持续时间震级M_D公式:M_D=a_0+0.44(lgτ)~2+0.00036Δ+DM这里,a_0为与记录分向和尾波截止水平有关的常数;DM为台站校正值。M_D标度内部单台标准差为0.09～0.10震级单位,M_D相对m_(Lg)的单台标准差为0.16～0.17震级单位。     

An updated scheme of imposex for<Emphasis Type="Italic"> Cantharus cecillei</Emphasis> (Gastropoda: Buccinidae) and a new mechanism leading to the sterilization of imposex-affected females

The morphological expressions of imposex in gastropods have been classified into seven stages (S₀–S₆) with three types (a, b and c). This typical imposex scheme, however, fails to cover some new findings such as specimens with the proximal vas deferens section passing by the vaginal opening (VDSP) and aborted egg capsules. In the present study, Cantharus cecillei was sampled from the coastal waters of China from May to November in 2003. This species showed all the morphological expressions in the typical imposex scheme with the exception of S_1b and S_2b. In addition, specimens with VDSP occurred in all stages other than stage 4, and were documented for the first time with scanning electron micrographs or in histological sections. Besides VDSP, which was observed exteriorly, excrescent tissue, e.g. the vas deferens, also originated in the ventral channel or the inner wall of the pallial oviduct was extruded. Based on these new findings, the typical imposex scheme was modified to obtain one valid for C. cecillei. Types a*, b* and c* were added as new types corresponding to types a, b and c, respectively. S_4* was also rearranged to correspond to S₄; S_4*, thus, no longer represented the end of imposex development. The updated scheme was not only valid for describing diverse expressions of imposex development in C. cecillei and Nassarius reticulatus, but could also be generalized to define various forms of VDSP in other species. Histological observation indicated that egg capsules would be blocked by the tissues of the vas deferens section or the extrusion of the pallial oviduct wall. This new mechanism, leading to the sterilization of imposex-affected females, was first conclusively revealed and described in the present scheme.Communicated by T. Ikeda, Hakodate     

Predicting cutoff aerodynamic diameter and sharpness of single round-nozzle impactors with a finite impaction plate diameter

This investigation numerically examined the cutoff aerodynamic diameter (da50) and the sharpness (GSD) of the particle collection efficiency curve of impactors with a finite impaction plate diameter. Results revealed that the inertial impactors have a limited cutoff aerodynamic diameter at different air velocities. The extreme value of the cutoff aerodynamic diameter increases with the nozzle diameter (W)/the plate diameter (Dc). The computed da50/Dc values of the impactors increase with W/Dc at various Reynolds numbers (Re) and with the nozzle-toplate distance (S)/Dc when Re is 100. The value of GSD slightly increases with W/Dc for Re of 10 and 100, although the effect of S/Dc on GSD is not evident at various Res. The particle collection efficiency curve of the impactor with a lower Re is less sharp than that with a high Re at various W/Dc and S/Dc values. Statistical equations closely fitted the obtained numerical results for Res of 10-3000. The equations are useful for directly calculating the cutoff aerodynamic diameter and the sharpness of the particle collection efficiency curve for single round-nozzle impactors with a finite impaction Dc.