Particulate matter emissions from on-road vehicles in a freeway tunnel study

Particulate matter, including coarse particles (PM_2.5–10, aerodynamic diameter of particle between 2.5 and 10 μm) and fine particles (PM_2.5, aerodynamic diameter of particle lower than 2.5 μm) and their compositions, including elemental carbon, organic carbon, and 11 water-soluble ionic species, and elements, were measured in a tunnel study. A comparison of the six-hour average of light-duty vehicle (LDV) flow of the two sampling periods showed that the peak hours over the weekend were higher than those on weekdays. However, the flow of heavy-duty vehicles (HDVs) on the weekdays was significant higher than that during the weekend in this study. EC and OC content were 49% for PM_2.5–10 and 47% for PM_2.5 in the tunnel center. EC content was higher than OC content in PM_2.5–10, but EC was about 2.3 times OC for PM_2.5. Sulfate, nitrate, ammonium were the main species for PM_2.5–10 and PM_2.5. The element contents of Na, Al, Ca, Fe and K were over 0.8 μg m^?3 in PM_2.5–10 and PM_2.5. In addition, the concentrations of S, Ba, Pb, and Zn were higher than 0.1 μg m^?3 for PM_2.5–10 and PM_2.5. The emission factors of PM_2.5–10 and PM_2.5 were 18 ± 6.5 and 39 ± 11 mg km^?1-vehicle, respectively. The emission factors of EC/OC were 3.6/2.7 mg km^?1-vehicle for PM_2.5–10 and 15/4.7 mg km^?1-vehicle for PM_2.5 Furthermore, the emission factors of water-soluble ions were 0.028(Mg²⁺)–0.81(SO₄^2?) and 0.027(NO₂^?)–0.97(SO₄^2?) mg km^?1-vehicle for PM_2.5–10 and PM_2.5, respectively. Elemental emission factors were 0.003(V)–1.6(Fe) and 0.001(Cd)–1.05(Na) mg km^?1-vehicle for PM_2.5–10 and PM_2.5, respectively.     

三烧溴化锂集中制冷空调系统改建设计

武钢三烧区域改建了二台大连三洋蒸汽型双效溴化锂吸收式制冷机。叙述了该改建项目的主机选型、参数选定、设计特点等。     

峒室大爆破的安全问题

全面总结了峒室大爆破设计和施工方面的安全，并给出其实施方案     

泾阳地磁台数字化与模拟资料的对比分析

本文选取泾阳地磁台2007年FHD-1核旋磁力仪和CB3磁变仪观测数据采用日变幅形态、日均值年变形态、总场21点值年变形态等方法做对比分析。结果表明:两种观测一致性较好,说明数字化仪器观测的数据是可靠的,但是数字化仪器还存在易受外界环境干扰,稳定性不好的问题,需要工作人员按规范调试仪器,认真维护与管理。     

A promising clean process for production of diosgenin from Dioscorea zingiberensis C. H. Wright

This study proposes a new approach for diosgenin production from Dioscorea zingiberensis C. H. Wright tubers with respect to resources utilization and clean production. This process consisted of two successive parts, i.e., recovery of starch from raw material, and microbial hydrolysis of the residue to produce diosgenin by Trichoderma reesei. In the first step, about 75.4% of hemicellulose and 98.0% of starch were removed from the tubers. In the second step, about 90.2% of diosgenin was released from saponins by T. reesei at 30 °C, at an aeration of 0.80 vvm and agitation rate of 300 rpm in a 5.0 L bioreactor. Significant reduction of pollutant production was detected by replacing the traditional approach with the proposed new method. About 99.2% of reducing sugar, 99.4% of chemical oxygen demand, 99.2% of total organic carbon, 100% of SO₄^2?, and 100% of acid was reduced in the new processing wastewater.     

Toluene decomposition performance and NOx by-product formation during a DBD-catalyst process

Characteristics of toluene decomposition and formation of nitrogen oxide (NOx) by-products were investigated in a dielectric barrier discharge (DBD) reactor with/without catalyst at room temperature and atmospheric pressure. Four kinds of metal oxides, i.e., manganese oxide (MnOx), iron oxide (FeOx), cobalt oxide (CoOx) and copper oxide (CuO), supported on Al₂O₃/nickel foam, were used as catalysts. It was found that introducing catalysts could improve toluene removal efficiency, promote decomposition of by-product ozone and enhance CO₂ selectivity. In addition, NOx was suppressed with the decrease of specific energy density (SED) and the increase of humidity, gas flow rate and toluene concentration, or catalyst introduction. Among the four kinds of catalysts, the CuO catalyst showed the best performance in NOx suppression. The MnOx catalyst exhibited the lowest concentration of O₃ and highest CO₂ selectivity but the highest concentration of NOx. A possible pathway for NOx production in DBD was discussed. The contributions of oxygen active species and hydroxyl radicals are dominant in NOx suppression.