Detection of polycyclic aromatic hydrocarbons using a high performance-single particle aerosol mass spectrometer

The real-time detection of the mixing states of polycyclic aromatic hydrocarbons (PAHs) and nitro-PAHs in ambient particles is of great significance for analyzing the source, aging process, and health effects of PAHs and nitro-PAHs; yet there is still few effective technology to achieve this type of detection. In this study, 11 types of PAH and nitro-PAH standard samples were analyzed using a high performance-single particle aerosol mass spectrometer (HP-SPAMS) in lab studies. The identification principles ‘parent ions’ and ‘mass-to-charge (m/z) = 77’ of each compound were obtained in this study. It was found that different laser energies did not affect the identification of the parent ions. The comparative experiments of ambient atmospheric particles, cooking and biomass burning emitted particles with and without the addition of PAHs were conducted and ruled out the interferences from primary and secondary organics on the identification of PAHs. Besides, the reliability of the characteristic ions extraction method was evaluated through the comparative study of similarity algorithm and deep learning algorithm. In addition, the real PAH-containing particles from vehicle exhaust emissions and ambient particles were also analyzed. This study improves the ability of single particle mass spectrometry technology to detect PAHs and nitro-PAHs, and HP-SPAMS was superior to SPAMS for detecting single particles containing PAHs and nitro-PAHs. This study provides support for subsequent ambient observations to identify the characteristic spectrum of single particles containing PAHs and nitro-PAHs.     

PH玻璃电极对比观测及误差研究

经过对PH玻璃电极对比观测实验，总结其在日常观测中衰减变化规律，以及PH电极失效前所具有的特征；讨论了对现有PH观测数据进行修正的方法，并编著相关修正程序；分析日常存在的测量误差，提出提高观测精度的措施。     

Comparison of Black Carbon,Total Organic Carbon,and PAH Concentrations in Surface Sediments from Two Main Rivers in Henan Province,China

Black carbon (BC) in surface sediments from Henan section of Yellow River and Huaihe River, China, was determined. Average content of BC in Huaihe River was 0.33%, higher than that in Yellow River (n?=?23) with mean value of 0.15%. Distribution patterns of BC in Yellow River and Huaihe River were similar, namely that tributaries had higher BC content than main stream. In addition, BC content in the mainstream of Yellow River and Huaihe River decreased with altitude. The BC content presented a significant positive correlation with clay (r?=?0.672; p?<?0.01) content in Yellow River, while neither did in Huaihe River. The ratio of BC/TOC ranged from 1.8–57.4% (median 29.6%), evidencing pyrogenic fossil fuel source of BC in Yellow River. Relatively low values of BC/TOC in Huaihe River (5.3%–28.8%, median 7.5%,) reflected that the origin of BC is from burning of biomass. In addition, Pearson rank correlation analysis showed that BC was in strong correlation with lighter PAH in Yellow River, while BC was in significant correlation with heavier PAH in Huaihe River. The ratio of BC/TOC indicated that BC in Yellow River mainly came from fossil fuel combustion, while BC in Huaihe River was primarily from biomass burning.     

Biotreatment of H2S- and NH3-containing waste gases by co-immobilized cells biofilter

Gas mixture of H2S and NH3 in this study has been the focus in the research area concerning gases generated from the animal husbandry and the anaerobic wastewater lagoons used for their treatment. A specific microflora (mixture of Thiobacillus thioparus CH11 for H2S and Nitrosomonas europaea for NH3) was immobilized with Ca-alginate and packed inside a glass column to decompose H2S and NH3. The biofilter packed with co-immobilized cells was continuously supplied with H2S and NH3 gas mixtures of various ratios, and the removal efficiency, removal kinetics, and pressure drop in the biofilter was monitored. The results showed that the efficiency remained above 95% regardless of the ratios of H2S and NH3 used. The NH3 concentration has little effect on H2S removal efficiency, however, both high NH3 and H2S concentrations significantly suppress the NH3 removal. Through product analysis, we found that controlling the inlet ratio of the H2S/NH3 could prevent the biofilter from acidification, and, therefore, enhance the operational stability. Conclusions from bioaerosol analysis and pressure drop in the biofilter suggest that the immobilized cell technique creates less environmental impact and improves pure culture operational stability. The criteria for the biofilter operation to meet the current H2S and NH3 emission standards were also established. To reach Taiwan's current ambient air standards of H2S and NH3 (0.1 and 1 ppm, respectively), the maximum inlet concentrations should not exceed 58 ppm for H2S and 164 ppm for NH3, and the residence time be kept at 72 s.     

Study on the kinetics of cerium(III) adsorption-desorption on different soils of China

The kinetics of Ce(III) adsorption-desorption on four typical soils in China has been studied by using the batch method with the radioactive nuclide 141Ce. Results indicated that Ce(III) adsorption was rapid and nearly finished in less than 0.5 min. Desorption procedure was about completed in 1-30 min in the tested soils. Ce(III) desorption equilibrium times vary with different soils. The amounts of Ce(III) desorption on different soils in the same time were different. The Elovich equation proved to be the best models for fitting the data of Ce(III) desorption reactions in fluvo-aquic soil and black soil; and the parabolic-diffusion equation was the best model in red earth and loess soil.     

Deodorization of dimethyl sulfide using a discharge approach at room temperature

The traditional technologies for odor removal of thiol usually create either secondary pollution for scrubbing, adsorption, and absorption processes, or sulfur (S) poisoning for catalytic incineration. This study applied a laboratory-scale radio-frequency plasma reactor to destructive percentage-grade concentrations of odorous dimethyl sulfide (CH3SCH3, or DMS). Odor was diminished effectively via reforming DMS into mainly carbon disulfide (CS2) or sulfur dioxide (SO2). The removal efficiencies of DMS elevated significantly with a lower feeding concentration of DMS or a higher applied rf power. A greater inlet oxygen (O2)/DMS molar ratio slightly improved the removal efficiency. In an O2-free environment, DMS was converted primarily to CS2, methane (CH4), acetylene (C2H2), ethylene (C2H4), and hydrogen (H2), with traces of hydrogen sulfide (H2S), methyl mercaptan (CH3SH), and dimethyl disulfide. In an O2-containing environment, the species detected were SO2, CS2, carbonyl sulfide, carbon dioxide (CO2), CH4, C2H4, C2H2, H2, formaldehyde, and methanol. Differences in yield of products were functions of the amounts of added O2 and the applied power. This study provided useful information for gaining insight into the reaction pathways for the DMS dissociation and the formation of products in the plasmolysis and conversion processes.     

Toxicity of combined sewer overflows on river phytoplankton: the role of heavy metals

The toxic effect of a combined sewer overflow (CSO) on the phytoplankton community of the river Seine has been studied by means of short-term primary production measurements. As the discharged solids usually do not remain in the water column, only filtered or centrifugated fractions were tested. The collected phytoplankton were grown in the laboratory for 2 days, after addition of N, P and EDTA. Stock cultures in exponential growth were directly tested with heavy metals, but resuspended algal cells were used for effluent testing. The results show an increase of EC50 value for the single metal species in the order Cu相似文献   

河道底泥陶粒比表面测定

讨论了以河道底泥和生活污泥为原料烧制陶粒比表面的测定原理、方法和结果，并对生活污泥添加量、粘结刑添加量和烧结温度对陶粒比表面的影响作了进一步分析。     

城市生活污水厌氧生物处理发展现状

回顾了国内外污水厌氧生物处理工艺的发展情况,着重分析了中国城市污水的特点以及厌氧生物处理工艺在城市生活污水处理中的应用情况。