Aerobic granules cultivated and operated in continuous-flow bioreactor under particle-size selective pressure

A novel method based on the selective pressure of particle size （particle-size cultivation method, PSCM） was developed for the cultivation and operation of aerobic granular sludge in a continuous-flow reactor, and compared with the conventional method based on the selective pressure of settling velocity （settling-velocity cultivation method, SVCM）. Results indicated that aerobic granules could be cultivated in continuous operation mode by this developed method within 14 days. Although in the granulation process, under particle-size selective pressure, mixed liquor suspended solids （MLSS） in the reactor fluctuated greatly and filamentous bacteria dominated the sludge system during the initial operation days, no obvious difference in profile was found between the aerobic granules cultivated by PSCM and SVCM. Moreover, aerobic granules cultivated by PSCM presented larger diameter, lower water content and higher specific rates of nitrification, denitrifieation and phosphorus removal, but lower settling velocity. Under long term operation of more than 30 days, aerobic granules in the continuous-flow reactor could remain stable and obtain good chemical oxygen demand （COD）, NH4^＋-N, total nitrogen （TN） and total phosphorus （TP） removal. The results indicate that PSCM was dependent on the cultivation and maintenance of the stability of aerobic granules in continuous-flow bioreactors.     

湿地基质及阴极面积对人工湿地型微生物燃料电池去除偶氮染料同步产电的影响

本研究采用人工湿地型微生物燃料电池处理偶氮染料X-3B,实现降解偶氮染料同步产电的效果.为了构建性能最优的人工湿地型微生物燃料电池(CW-MFC)系统,本研究主要从湿地基质和阴极面积两个方面研究系统构型对去除X-3B同步产电的影响,提高系统性能.研究表明以粒径10 mm、孔隙率30%的小石子作为湿地基质构造的CW-MFC系统微生物生物量最大,去除X-3B效果最好,脱色率高达92.70%,但其产电性能最差.较小的粒径和孔隙率使底层微生物生物量增加,促进X-3B的去除,但随着湿地基质粒径和孔隙率的减小,导致阴阳极营养物质不足,系统传质阻力增加,抑制了系统产电性能.X-3B的去除效果随着阴极面积的增加而提高直到阴极面积为594 cm~2时取得最大脱色率99.41%.当阴极面积继续增加时,CW-MFC系统产电性能上升趋势趋于平缓,X-3B去除效果呈现下降趋势,这是因为阴极反应过快导致更多的阳极电子输送到阴极用于产生电流,与X-3B发生反应的电子减少,阳极成为提高CW-MFC系统性能的限制因素.     

吴哥窟——人间最美的建筑

以雕刻和建筑艺术闻名于世的吴哥文化,是柬埔寨文化乃至世界历史发展上的一个高峰,因此,探访吴哥窟成为当今许多国内外旅游文化人士的梦想,笔者不久前有幸来到柬埔寨,来到吴哥。与中国的万里长城、埃及的金字塔和印度尼西亚的婆罗浮屠并称为东方世界四大奇迹之一的吴哥古迹,位于柬埔寨暹粒省金边湖北面,它包括吴哥主城和吴哥窟古刹,大小奇特的建筑物共有600多座,分布在45平方公里的丛林中,或许没有人想到,这么精致、辉煌的建筑群落,这个世界古代文明璀璨的瑰宝,曾经湮没在荒革中达400年之久。     

不同加碱量下爆破制浆的源强试验研究

为了解爆破制浆的排污情况和废水处理的可行性,以烧碱和石灰作投加药剂,进行了不同加碱量条件下爆破制浆产生源强的试验研究,以确定最佳的加碱量和适宜的黑液提取率.研究表明,在加碱量相同的情况下,采用常规爆破浆样,浆样性能较好;在保持吨粗干浆产生的COD一致时,投加价格低廉的石灰,既能降低生产成本,又便于后续的废水处理;工程调试运行结果表明,控制吨粗干浆的石灰投加量为25～30 kg时,黑液提取率超过80%,最终出水COD<100 mg/L.     

Decolorization of cationic red X-GRL by wet air oxidation: performance optimization and degradation mechanism

The decolorization of a strong colored azo dye solution of cationic red X-GRL was investigated by wet air oxidation under relatively mild conditions (60-180 degrees C, PO2 = 0-1.2 MPa). Mono-factor experiments were carried out to investigate the effect of the operation factors and the relatively important parameters were selected for optimization using response surface methodology to explore the interactions of these relatively important parameters. Model regeneration analysis and the check experiments showed that the data of the general linear model agreed with the experiment results well. With multistage Monte-Carlo optimization, the best region of these variables could be predicted to dye color removal. At typical operational conditions, the intermediates of dye degradation were detected and confirmed by GC/MS system. Considering the intermediates and the structure analysis with the help of Gaussian 03W (version 6.0) and the theory of dye color, a possible degradation mechanism for the wet air oxidation of cationic red X-GRL was discussed and the probable degradation pathway was deduced.     

Application of artificial neural network approach and remotely sensed imagery for regional eco-environmental quality evaluation

Eco-environment quality evaluation is an important research theme in environment management. In the present study, Fuzhou city in China was selected as a study area and a limited number of 222 sampling field sites were first investigated in situ with the help of a GPS device. Every sampling site was assessed by ecological experts and given an Eco-environment Background Value (EBV) based on a scoring and ranking system. The higher the EBV, the better the ecological environmental quality. Then, three types of eco-environmental attributes that are physically-based and easily-quantifiable at a grid level were extracted: (1) remote sensing derived attributes (vegetation index, wetness index, soil brightness index, surface land temperature index), (2) meteorological attributes (annual temperature and annual precipitation), and (3) terrain attribute (elevation). A Back Propagation (BP) Artificial Neural Network (ANN) model was proposed for the EBV validation and prediction. A three-layer BP ANN model was designed to automatically learn the internal relationship using a training set of known EBV and eco-environmental attributes, followed by the application of the model for predicting EBV values across the whole study area. It was found that the performance of the BP ANN model was satisfactory and capable of an overall prediction accuracy of 82.4%, with a Kappa coefficient of 0.801 in the validation. The evaluation results showed that the eco-environmental quality of Fuzhou city is considered as satisfactory. Through analyzing the spatial correlation between the eco-environmental quality and land uses, it was found that the best eco-environmental areas were related to forest lands, whereas the urban area had the relatively worst eco-environmental quality. Human activities are still considered as a major impact on the eco-environmental quality in this area.     

The determination and matching analysis of pinch point temperature difference in evaporator and condenser of organic rankine cycle for mixed working fluid

Exergo-economic analysis of the pinch point temperature difference (PPTD) in both evaporator and condenser of sub-critical organic Rankine cycle system (ORCs) are performed based on the first and second laws of thermodynamics. Taking mixture R13I1/R601a as a working fluid and the annual total cost per net output power Z as exergo-economic performance evaluation criterion, the effects of PPTD in evaporator ΔT_e, and the PPTD ratio of condenser to evaporator y, on the exergo-economic performance of ORCs are analyzed. Moreover, how some other parameters influence the optimal PPTD in evaporator ΔT_e,opt and the optimal PPTD ratio of condenser to evaporator y_opt are also discussed. It has been found that the exergo-economic performance of ORCs is remarkably influenced by ΔT_e and y, and there exists ΔT_e,opt and y_opt. In addition, ΔT_e,opt and y_opt are affected by heat transfer coefficient ratio of condenser to evaporator ß, the temperature of working fluid at dew point in condenser T_1a, and composition of R13I1/R601a: larger ß and T_1a lead to lower ΔT_e,opt and y_opt; by contraries, larger mass fraction of R13I1 makes ΔT_e,opt and y_opt increase, and y_opt increases linearly. The effects of the temperature of working fluid at bubble point in evaporator T_3a, mass flow rate of exhaust flue gas m_g, and inlet temperature of exhaust flue gas T_gi on ΔT_e,opt and y_opt are very slight. For comparison, three additional working fluids, namely R601a, R245fa, and 0.32R245fa/0.68R601a, are also taken into account.     

Pseudomonas sp.fz胞外分离物降解四溴双酚A

四溴双酚A(TBBPA)是全球消耗量最大的溴系阻燃剂。通过活性物质的定位、分离和TBBPA产物的分析等步骤,对Pseudomonas sp.fz胞外分离物降解TBBPA进行了研究。结果表明,存在于胞外的活性物质通过异丙基断裂和脱溴两条途径降解TBBPA。通过超滤,Sephadex G-10分离纯化得到了具有降解活性的小分子物质,分子量约为376~456 Da,初步鉴定为短肽类物质。这种小分子物质具有很好的热稳定性(30~80℃),在弱酸性条件下(2.0~5.0)活性较高,其活性还受金属离子、氧气和抑制剂(Na N3)的影响。此外,部分纯化的小分子物质在一定条件下能够产生羟基自由基(·OH)。     

不同培养条件下锰过氧化物酶(MnP)的合成及其对甲基橙的降解

高效、大规模、低成本合成木质素降解酶是直接采用其降解难降解有机污染物所必须解决的问题.对锰过氧化物酶(MnP)降解甲基橙和在非灭菌的反应器中连续合成MnP的可行性进行考察.结果表明,在采用2 mmol H2O2和1.5 mmol MnSO4的降解体系中,获最大脱色效果,且100、200和300 U/L的MnP可在8h内将甲基橙分别脱色18％、23％和35％;在非灭菌的反应器水平上实现了固定化培养的P.chrysosporium连续23 d合成MnP,但MnP酶活仅为2～ 23 U/L,难以酶解甲基橙;然而,在摇瓶培养条件下固定化的P.chrysosporium合成的MnP却能达1 152 U/L.因此,直接采用MnP对污染物进行降解以及在非灭菌的反应器中持续合成MnP是可行的,但就在非灭菌条件下如何提高MnP的合成量还有待开展深入的研究.     

阳离子型聚合物对低温低浊水的絮凝效果与形态学特性

采用微絮凝-深床直接过滤工艺,以西安市曲江水厂低温低浊水质为原水(水温低于10 ℃,初始浊度低于10NTU),投加阳离子型聚合物(简称CP)作主混凝剂或助凝剂,借助分形数学理论与图像分析技术,对滤料粒径、原水浊度、原水温度、药剂种类、聚合物分子量及投加量、混合强度等因素对处理效果的影响进行了研究,分析探讨了不同药剂处理低温低浊水的作用机理、絮凝形态学特征以及絮体结构的分形特性.结果表明,①当温度低于4 ℃、初始浊度小于4NTU时,不宜单独采用Al2(SO4)3或PAC作为絮凝剂;当温度为4～10 ℃、初始浊度小于10NTU时,如果只投加Al2(SO4)3或PAC作为絮凝剂,宜用细砂滤料过滤;低温低浊条件下,无机混凝剂形成的絮体粒径小、结构松散脆弱、有效质量密度低、沉速慢,但表征絮体分形特性的分维值较高.②CP作絮凝剂能显著改善低温低浊水的絮凝效果与过滤性能,但混合强度需增大,宜用粗砂滤料过滤;③单独用CP作絮凝剂时,宜投加分子量较低的弱阳性聚合物或投加低剂量较高分子量的强阳性聚合物;CP用作助凝剂时,能显著减少主混凝剂用量,但宜投加强阳性聚合物或增加弱阳性聚合物的剂量.④CP兼备电性中和与吸附架桥絮凝作用,能形成粒径较大、吸附性能与过滤性能良好的网状絮体构型,其有效质量密度高,产生的污泥量少,污泥沉降速度快,脱水效果好,但分维值低.⑤各种水处理药剂的处理效果为:Al2(SO4)3(或PAC) CP＞CP＞PAC＞Al2(SO4)3,这种差别由絮体的形态学特性与构型特征各异引起.