Comparison of lignin peroxidase and horseradish peroxidase for catalyzing the removal of nonylphenol from water

Concentrations of aqueous-phase nonylphenol (NP), a well-known endocrine-disrupting chemical, are shown to be reduced effectively via reaction with lignin peroxidase (LiP) or horseradish peroxidase (HRP) and hydrogen peroxide. We systematically assessed their reaction efficiencies at varying conditions, and the results have confirmed that the catalytic performance of LiP toward NP was more efficient than that of HRP under experimental conditions. Mass spectrum analysis demonstrated that polymerization through radical–radical coupling mechanism was the pathway leading to NP transformation. Our molecular modeling with the assistance of ab initio suggested the coupling of NP likely proceeded via covalent bonding between two NP radicals at their unsubstituted carbons in phenolic rings. Data from acute immobilization tests with Daphnia confirm that NP toxicity is effectively eliminated by LiP/HRP-catalyzed NP removal. The findings in this study provide useful information for understanding LiP/HRP-mediated NP reactions, and comparison of enzymatic performance can present their advantages for up-scale applications in water/wastewater treatment.     

Enhanced degradation of ortho-nitrochlorobenzene by the combined system of zero-valent iron reduction and persulfate oxidation in soils

ortho-Nitrochlorobenzene (o-NCB) in soil poses significant health risks to human because of its persistence and high toxicity. The removal of o-NCB by both zero-valent iron (ZVI) and chemical oxidation (persulfate) was investigated by batch experiments. The o-NCB removal rate increases significantly from 15.1 to 97.3 % with an increase of iron dosage from 0.1 to 1.0 mmol g^?1. The o-NCB removal rate increases with the decrease of the initial solution pH, and a removal efficiency of 90.3 % is obtained at an initial pH value of 6.8 in this combined system. It is found that temperature and soil moisture could also increase the o-NCB removal rate. The o-NCB degradation rate increases from 83.9 to 96.2 % and from 41.5 to 82.4 % with an increase of temperature (15 to 35 °C) and soil moisture (0.25 to 1.50 mL g^?1), respectively. Compared to the persulfate oxidation system and ZVI system, the persulfate–iron system shows high o-NCB removal capacity. o-NCB removal rates of 41.5 and 62.4 % are obtained in both the persulfate oxidation system and the ZVI system, while the removal rate of o-NCB is 90.3 % in the persulfate–iron system.     

Tree bark as a passive air sampler to indicate atmospheric polybrominated diphenyl ethers (PBDEs) in southeastern China

The different barks were sampled to discuss the influence of the tree species, trunk circumference, and bark thickness on the accumulation processes of polybrominated diphenyl ethers (PBDEs) from air into the bark. The results of different PBDE concentrations indicated that barks with a thickness of 0–3 mm collected from weeping willow, Camphor tree, and Masson pine, the trunk circumferences of which were 100 to 150 cm, were better PBDEs passive samplers. Furthermore, tree bark and the corresponding air samples were collected at Anji (AJ), Hangzhou (HZ), Shanghai (SH), and Wenling (WL) to investigate the relationship between the PBDE concentrations in bark and those in air. In addition, the significant correlation (r ²?=?0.906; P?<?0.05) indicated that atmospheric PBDEs were the principle source for the accumulation of PBDEs in the barks. In this study, the log K _BA (bark–air partition coefficient) of individual PBDE congeners at the four sites were in the range from 5.69 to 6.79. Finally, the total PBDE concentration in WL was 5 to 20 times higher than in the other three cities. The result indicated that crude household workshops contributed a heavy amount of PBDEs pollution to the environment, which had been verified by the spatial distribution of PBDEs levels in barks collected at Wenling (range, 26.53–1317.68 ng/g dw). The good correlation between the PBDE concentrations in the barks and the air samples and the variations of the PBDE concentrations in tree barks collected from different sites reflected that the bark could be used as a passive sampler to indicate the atmospheric PBDEs.     

突变灰盖鬼伞过氧化物酶降解刚果红的响应面法优化分析简

酶法降解偶氮染料刚果红是一个复杂的过程,受温度、pH、酶量、刚果红浓度和双氧水浓度显著影响。为研究各因素及因素间交互作用对刚果红降解影响,提高刚果红的降解率,分别使用单因素法和响应面分析法对刚果红降解条件进行了优化。单因素实验结果显示灰盖鬼伞过氧化物酶降解刚果红的最适条件为：pH 5.0、32℃、酶量4.98 U、双氧水0.1 mmol/L、刚果红20 mg/L,此时刚果红最高降解率为34.84%。然后选双氧水浓度、刚果红浓度和灰盖鬼伞过氧化物酶量作为3个因素,通过中心组合设计实验,用响应面法对刚果红降解进行优化分析,最后得到一个拟合度良好的二次多项方程模型（R²=0.9900）。方差分析结果显示,刚果红浓度和酶量是影响最显著的因素,双氧水与酶以及染料与酶之间的交互作用极显著。响应面分析优化后的反应体系为：双氧水浓度0.15 mmol/L,刚果红浓度为27.21 mg/L,酶为2.0 7 U,在此条件下,刚果红降解率达58.13%。     

UV/Fenton技术处理某工厂高浓度乳化油废水

研究了UV/Fenton技术对高浓度金属清洗乳化油废水的处理效果,考察了亚铁与双氧水浓度、pH、反应时间和搅拌对COD去除效果的影响。实验结果表明,UV/Fenton技术对高浓度乳化油废水(COD平均浓度为35 000 mg/L)具有较高的去除效果,最佳工艺条件为:亚铁与双氧水浓度分别为2 400 mg/L和6 000 mg/L,pH为3,经过2 h反应,COD可降低至1 050 mg/L,去除率为97%。搅拌会降低COD的去除率。研究表明,UV/Fenton技术对高浓度乳化油废水具有很好的降解效果,且药品消耗较低,为目前此类高浓度有机废水的处理提供了技术参考。     

介质阻挡放电协同Ag/Al_2O_3对NO_x脱除的影响

为有效去除发电厂烟气中产生的NOx,利用介质阻挡放电(DBD)产生低温等离子体并结合催化剂Ag/Al2O3进行烟气脱硝实验,研究了在加入乙烯的条件下,平均负载量、催化温度和装置的布置方式对NOx脱除的影响。结果表明,随着负载的增多,NO脱除率呈现先增大后减小的趋势,5种负载量中最佳为1.76%;随着催化温度的升高,NO脱除率同样呈现先增大后减小的趋势,最佳的催化温度为150℃左右;3种不同布置方式对NO和NOx脱除有明显差别,单独催化剂在NO和NOx的脱除率都比较低;单独介质阻挡放电NO脱除率很高,但是NOx很却很低;而两者结合在NO和NOx都达到了很好的效果。     

两级EGSB反应器处理焦化废水的实验研究

采用两级膨胀颗粒污泥床(EGSB)反应器在微氧条件下处理焦化废水,分别考察了一级和二级EGSB反应器(EGSBⅠ和EGSBⅡ)对污染物的去除效果。结果表明,系统能够高效去除COD和NH3-N,EGSBⅠ主要用于去除COD,EGSBⅡ主要用于去除NH3-N。总水力停留时间(HRT)为24 h(EGSBⅠ12 h+EGSBⅡ12 h),系统对952 mg/L的COD、41.3 mg/L的NH3-N、34.55 mg/L的挥发酚、295.8 mg/L的硫氰化物和0.89 mg/L的氰化物的平均去除率分别为78.1%、81.3%、100%、98.1%和89.9%。出水COD、NH3-N、挥发酚、硫氰化物和氰化物的平均浓度分别为208、7.7、0、5.7和0.09 mg/L。出水NH3-N、挥发酚和氰化物浓度均低于《炼焦化学工业污染物排放标准》(GB 16171-2012)的直接排放限值。     

Development of a Speciated,Hourly, and Gridded Air Pollutants Emission Modeling System—A Case Study on the Precursors of Photochemical Smog in the Seoul Metropolitan Area,Korea

ABSTRACT

A speciated, hourly, and gridded air pollutants emission modeling system (SHEMS) was developed and applied in predicting hourly nitrogen dioxide (NO₂) and ozone (O₃) levels in the Seoul Metropolitan Area (SMA). The primary goal of the SHEMS was to produce a systemized emission inventory for air pollutants including ozone precursors for modeling air quality in urban areas.

The SHEMS is principally composed of three parts: (1) a pre-processor to process emission factors, activity levels, and spatial and temporal information using a geographical information system; (2) an emission model for each source type; and (3) a post-processor to produce report and input data for air quality models through database modeling. The source categories in SHEMS are point, area, mobile, natural, and other sources such as fugitive emissions. The emission database produced by SHEMS contains 22 inventoried compounds: sulfur dioxide, NO₂, carbon monoxide, and 19 speciated volatile organic compounds. To validate SHEMS, the emission data were tested with the Urban Airshed Model to predict NO₂ and O₃ concentrations in the SMA during selected episode days in 1994. The results turned out to be reliable in describing temporal variation and spatial distribution of those pollutants.     

Modeling cold soak evaporative vapor emissions from gasoline-powered automobiles using a newly developed method

ABSTRACT

Volatile organic compounds (VOCs) evaporate and vent from a vehicle’s fuel tank to its evaporative control system when the vehicle is both driven and parked. VOCs making it past the control system are emissions. Driving and parking activity, fuel volatility, and temperature strongly affect vapor generation and the effectiveness of control technologies, and the wide variability in these factors and the sensitivity of emissions to these factors make it difficult to estimate evaporative emissions at the macro level. Established modeling methods, such as COPERT and MOVES, estimate evaporative emissions by assuming a constant in-use canister condition and consequently contain critical uncertainty when real conditions deviate from that standard condition. In this study, we have developed a new method to model canister capacity as a representative variable, and estimated emissions for all parking events based on semi-empirical functions derived from real-world activity data and laboratory measurements. As compared to chamber measurements collected during this study, the bias of the MOVES diurnal tank venting simulation ranges from ?100% to 129%, while the bias for our method’s simulation is 1.4% to 8.5%. Our modeling method is compared to the COPERT and MOVES models by estimating evaporative emissions from a Euro-3/4/5 and a Tier 2 vehicle in conditions representative for Chicago, IL, and Guangzhou, China. Estimates using the COPERT and MOVES methods differ from our method by ?56% to 120% and ?100% to 25%, respectively. The study highlights the importance for continued modeling improvement of the anthropogenic evaporative emission inventory and for tightened regulatory standards.

Implications: The COPERT and MOVES methodologies contain large uncertainties for estimating evaporative emissions, while our modeling method is developed based on chamber measurements to estimate evaporative emissions and can properly address those uncertainties. Modeling results suggested an urgent need to complete evaporative emissions inventories and also indicated that tightening evaporative emission standards is urgently needed, especially for warm areas.     

Nutrient removal in tropical subsurface flow constructed wetlands under batch and continuous flow conditions

The aim of this investigation was to evaluate the influence of batch versus continuous flow on the removal efficiencies of chemical oxygen demand (COD), nitrogen (N) and total phosphorus (TP) in tropical subsurface flow constructed wetlands (SSF CW). The quantitative role of the higher aquatic plants in nutrient removal in these two operational modes was also investigated. Results indicated no significant difference (p > 0.05) in COD removal between batch and continuous flow modes for either the planted or unplanted treatments. Furthermore, the batch-loaded planted wetlands showed significantly (p < 0.05) higher ammonium removal efficiencies (95.2%) compared with the continuously fed systems (80.4%), most probably because the drain and fill batch mode presented systematically more oxidized environmental conditions. With respect to TP removal, for both planted and unplanted beds, there was significant enhancement (p < 0.05) in batch flow operation (69.6% for planted beds; 39.1% for unplanted beds) as compared to continuous flow operation (46.8% for planted beds; 25.5% for unplanted beds). In addition, at a 4-day hydraulic retention time (HRT), the presence of plants significantly enhanced both ammonia oxidation and TP removal in both batch and continuous modes of operation as compared to that for unplanted beds. An estimation of the quantitative role of aeration from drain and fill operation at a 4-day HRT, as compared to rhizosphere aeration by the higher aquatic plant, indicated that drain and fill operation might account for only less than half of the higher aquatic plant's quantitative contribution of oxygen (1.55 g O2 per m2 per day for batch flow versus 1.13 g O2 per m2 per day for continuous flow).