Bioavailability evaluation of naphthalene in soil using persulfate oxidation and ultrasonic extraction method

Bioavailability is defined as the fraction of a soil contaminant readily available for microbial degradation and for naphthalene it could be estimated by conventional exhaustive extraction methods. In this study, a novel method that employed persulfate oxidation in combination with ultrasonic extraction (POUSE) was developed. Three parameters, temperature, duration of persulfate oxidation, and the ratio of persulfate to soil organic matter (2S,082 /SOM; g g-1), were investigated to obtain an optimum operating conditions. Under the condition, naphthalene bioavailability estimated by the POUSE method was verified and compared with other three exhaustive methods i.e. sonicator, supercritical fluid extraction (SFE), and soxhlet extraction (SE). When the S2,O(8)2-/SOM ratio was controlled at 11.6 g g-1, the optimum operating conditions of the POUSE method were 70 degreesC and 3 hr, for the temperature and duration. Under these conditions, the residual naphthalene concentrations were correlated well with the residual naphthalene concentrations for both the cases of freshly spiked and aged soils. By contrast, the sonicator, SFE, and the SE overestimated the naphthalene bioavailability since these three methods extracted naphthalene much more than that of biodegradation test. These results demonstrated that the POUSE could estimate more precisely the naphthalene bioavailability.     

The reproductive ecology of the invasive ascidian, <Emphasis Type="Italic">Styela clava,</Emphasis> in Auckland Harbour,New Zealand

The ascidian Styela clava, native to the north-west Pacific, is an invasive species affecting New Zealand’s marine ecosystems, biodiversity and aquaculture operations. To provide detailed information on the reproductive biology of S. clava in New Zealand for post-border biosecurity management, long-term seasonal patterns of gametogenesis were determined from May 2006 to May 2008 in Auckland’s Waitemata Harbour (36°49′20″S, 174°45′85″E). Of particular interest was whether the critical 15°C threshold spawning temperature for reproduction observed in the Northern Hemisphere applied here to the first Southern Hemisphere study. S. clava gametogenesis followed a regular seasonal cycle with ripe gametes appearing as early as September and persisting to June; this time frame corresponds to the period when sea surface temperatures in the region first reach 15°C and with spawning occurring mainly during late summer to early autumn. From photoperiod manipulation, it was determined that spawning occurred at approximately 18:20. The extended reproductive period and a short generation time in the Waitemata Harbour provides a lengthy opportunity for S. clava to spread. Findings are discussed in relation to S. clava’s post-border management.     

Lead contamination in surface soil on roads from used lead–acid battery recycling in Dong Mai,Northern Vietnam

Used lead–acid battery (ULAB) recycling has caused numerous health and environmental issues in developing countries. Surface soil pollution from ULAB recycling activities has been linked with elevated levels of lead in human blood. We measured surface soil lead in and surrounding the ULAB recycling village of Hung Yen in northern Vietnam in 2011, 2013, and 2014. The data were analyzed statistically and discussed with respect to distance from the contamination source, year of measurement, contamination pathway, and countermeasures against the contamination. Transportation routes from the smelter or collection site displayed the greatest concentration of surface soil lead (median 6400–10,000 mg/kg). Surface soil lead decreased significantly with distance along the road from the ULAB recycling site, although such a decrease was not observed for rice fields, agricultural roads, or garden soil. Re-suspension and adherence by traffic were identified as key pollution pathways. Distance from the source, covering of the surface of roads, construction of walls, and position relative to the source were shown to be the most effective factors in the reduction of surface soil lead pollution. Application of a combination of these measures should result in improvement in the health of residents.     

Glass recycling in cement production--an innovative approach

An innovative approach of using waste glass in cement production was proposed and tested in a laboratory and cement production plant. The laboratory characterization of 32 types of glass show that the chemical composition of glass does not vary significantly with its color or origin but depends on its application. The alkali content of glass, a major concern for cement production varies from 0 to 22%. For the glass bottles mainly found in Hong Kong waste glasses, the alkali content (Na2O) ranges from 10 to 19% with an average around 15%. There is no significant change of the SO2 content in the gas exhaust of the rotary kiln when about 1.8 t/h of glass bottles were loaded along with the 280-290 t/h raw materials. The content of NOx, mainly depends on the temperature of the kiln, does not show significant change either. The SO3 content of the clinker is comparable with that obtained without the loading of glass. The alkaline content shows a slight increase but still within three times the standard deviation obtained from the statistical data of the past year. The detailed analysis of the quality of the cement product shows that there is not any significant impact of glass for the feeding rate tested.     

Plastic waste as a valuable resource: strategy to remove heavy metals from wastewater in bench scale application

Environmental Science and Pollution Research - Single-use plastic waste is gradually considered a potential material for circular economy. Ion exchange resin obtained from polystyrene waste by...     

Assessment of some water quality parameters in the Red River downstream,Vietnam by combining field monitoring and remote sensing method

Environmental Science and Pollution Research - The Red River is the largest river in northern Vietnam, and it serves as the main water source for production and human activities in the Red River...     

城市污泥堆肥中水溶性有机物的理化特性变化

通过透析和XAD-8树脂等方法研究了城市污泥堆肥过程中水溶性有机物(DOM)的理化特性变化.结果表明,随着堆肥的进行,堆肥DOM的浓度和pH值分别降低了58.4%和9.5%;DOM中小分子组分和亲水性组分分别减少了13.1%和9.2%,而大分子组分与疏水性组分有所增加,疏水性组分/亲水性组分由0.89增至1.29;DOM中C、H、N、S含量和C/H、C/N、C/S、C/(N+S)均呈降低趋势.这些变化趋势与堆肥过程中有机物的变化规律一致,因此,堆肥DOM的理化特性能用以表征堆肥的腐熟度.     

Surfactant-induced changes in gravity fingering of water through a light oil

Gravity-driven preferential flow (fingering) can greatly affect how one fluid displaces another in the subsurface. We have studied the internal properties of these preferential flow paths for water, with and without surfactants, infiltrating into oil saturated porous media using synchrotron X-rays, and miniature tensiometers to characterize fluid content and pressure relationships. We also used a light transmission technique to visualize overall flow pattern. Capillary pressure and water content decrease behind the front, similar to fingers in air-dry sand, with quantitative differences for five different surfactants with surface tensions ranging from 4–21 g/s². Using unstable flow theory, the finger widths, capillary pressure drops within the fingers, finger tip lengths, and finger splitting dynamics were scaled successfully with interfacial tension, fluid density, and the contact angle using the fingers in air–water systems as the reference.     

Surface functional characteristics (C, O, S) of waste tire-derived carbon black before and after steam activation

The effects of steam activation on the surface functional characteristics of waste tire-derived carbon black were investigated. Two carbon-based materials, powdered carbon black (PCB) and PCB-derived powdered activated carbon (PCB-PAC), were selected for this study. A stainless steel tubular oven was used to activate the PCB at an activation temperature of 900 degrees C and 1 atm using steam as an activating reagent. X-ray photoelectron spectroscopy (XPS) was adopted to measure the surface composition and chemical structure of carbon surface. Various elemental spectra (C, O, and S) of each carbon sample were further deconvoluted by peak synthesis. Results showed that the surfaces of PCB and PCB-PAC consisted mainly of C-C and C-O. The PCB-PAC surface had a higher percentage of oxygenated functional groups (C=O and O-C=O) than PCB. The O1s spectra show that the oxygen detected on the PCB surface was mainly bonded to carbon (C-O), whereas the oxygen on the PCB-PAC surface could be bonded to hydrogen (O-H) and carbon (C-O). Sulfur on the surface of PCB consisted of 58.9 wt% zinc sulfide (ZnS) and 41.1 wt% S=C=S, whereas that on the surfaces of PCB-PAC consisted mainly of S=C=S. Furthermore, the increase of oxygen content from 9.6% (PCB) to 11.9% (PCB-PAC) resulted in the increase of the pH values of PCB-PAC after steam activation.     

Identification of soil heavy metal sources from anthropogenic activities and pollution assessment of Fuyang County, China

Understanding regional variations of soil heavy metals and their anthropogenic influence are very important for environmental planning. In this study, 286 surface soil samples were collected in Fuyang county, and the 'total' metals for copper (Cu), zinc (Zn), lead (Pb), cadmium (Cd) and nickel (Ni) were measured in 2005. Statistic analysis showed that Cu, Zn, Pb and Cd had been added by exterior factors, and Ni was mainly controlled by natural factors. The combination of multivariate statistical and geostatistical analysis successfully grouped three groups (Cu, Zn and Pb; Cd; and Ni) of heavy metals from different sources. Through pollution evaluation, it was found that 15.76% of the study area for Cu, Zn and Pb, and 46.14% for Cd suffered from moderate or severe pollution. Further spatial analysis identified the limestone mining activities, paper mills, cement factory and metallurgic activities were the main sources for the concentration of Cu, Zn, Pb and Cd in soils, and soil Ni was mainly determined by the parent materials.