Calculating losses of crops in Denmark caused by high ozone levels

In order to help guide air pollution legislation at the European level, harmful air pollution effects on agriculture crops and the consequent economic implications for policy have been studied for more than a decade. Ozone has been labeled as the most serious of the damaging air pollutants to agriculture, where growth rates and consequently yields are dramatically reduced. Quantifying the effects has formed a key factor in policymaking. Based on the widely held view that AOT40 (Accumulated exposure Over Threshold of 40 ppb) is a good indicator of ozone-induced damage, the Danish Eulerian Model (DEM) was used to compute reduced agriculture yields on a 50 km×50 km grid over Europe. In one set of scenarios, a ten year meteorological time series was combined with realistic emission inventories. In another, various idealized emission reduction scenarios are applied to the same meteorological time series. The results show substantial inter-annual variability in economic losses, due in most part to meteorological conditions which varied much more substantially than the emissions during the same period. It is further shown that, taking all uncertainties into account, estimates of ozone-induced economic losses require that a long meteorological record is included in the analysis, for statistical significance to be improved to acceptable levels for use in policy analysis. In this study, calculations were made for Europe as a whole, though this paper presents results relevant for Denmark.     

Suspended particulates and bioaerosols emitted from an agricultural non-point source

Suspended particulate and bioaerosol levels were measured at three sites downwind of an agricultural non-point source during the wheat harvesting season. Suspended particulates were detected at mean values ranging from 10000 to 2420 micrograms m-3 at distances of from 20 to 60 m downwind of the source, respectively. Airborne viable bacterial counts were recorded at mean values ranging between 10(4) and 10(6) colony forming units (cfu) m-3, whereas, Gram negative (Gram -ve) bacteria varied between 10(3) and 10(5) cfu m-3. Fungi levels were detected at mean values varying between 10(5) and 10(6) cfu m-3. However, streptomycetes were found at lower counts than those recorded for viable bacteria and fungi. Total viable bacteria, Gram -ve bacteria, fungi and streptomycetes associated hay fragments were determined at mean values of 1.5 x 10(6), 1.6 x 10(3), 2.2 x 10(4) and 6 x 10(3) cfu g-1 of hay, respectively. Cladosporium, white and red yeasts as well as Alternaria were the predominant airborne fungi, whereas, Alternaria was the dominant species associated with hay fragments. Pseudomonas, Acinetobacter and Enterobacteriaceae were the dominant Gram -ve bacteria. The most common fungal genera, such as Cladosporium and Fusarium (minor short axis), as well as Streptomyces species have an aerodynamic diameter (dae) of less than 5 microns, which can penetrate and deposit in the alveoli. Farmers and nearby residents are exposed to high levels of organic dust and bioaerosols during the wheat harvesting season. This may cause health problems in exposed persons based on toxic or allergic reactions.     

Characterisation of mineralogical forms of barium and trace heavy metal impurities in commercial barytes by EPMA, XRD and ICP-MS

This study was carried out to characterise the mineralogical forms of barium and the trace heavy metal impurities in commercial barytes of different origins using electron probe microanalysis (EPMA), X-ray diffraction (XRD) and inductively coupled plasma mass spectrometry (ICP-MS). Qualitative EPMA results show the presence of typically eight different minerals in commercial barytes including barite (BaSO4), barium feldspar, galena (PbS), pyrite (FeS2), sphalerite (ZnS), quartz (SiO2), and silicates, etc. Quantitative EPMA confirms that the barite crystals in the barytes contain some strontium and a little calcium, whereas trace heavy metals occur in the associated minerals. Analysis of aqua regia extracts of barytes samples by ICP-MS has shown the presence of a large number of elements in the associated minerals. Arsenic, copper and zinc concentrations correlate closely in all 10 samples. The findings suggest that barytes is not, as traditionally thought, an inert mineral, but is a potentially toxic substance due to its associated heavy metal impurities, which can be determined by an aqua regia digest without the need for complete dissolution of the barite itself. X-ray powder diffraction was not informative as the complex barite pattern masks the very weak lines from the small amounts of associated minerals.     

Perceived changes in well-being and happiness with gardening in urban organic allotments in Portugal

Urban allotment gardens (AG) in Portugal have increased in recent years, as in many other European countries and worldwide. The contribution of these gardens to the happiness and well-being of urban populations has been recognized, but evaluations of their benefits are still very scarce. The objective of this study was to evaluate this contribution, based on the urban organic AG of the Devesa Park in Vila Nova de Famalicão, Portugal. The sample included 65 gardeners who completed the self-administered questionnaires of Bem-Estar Pessoal (personal well-being scale), Felicidade Subjetiva (subjective happiness scale) and sociodemographic characteristics. Respondents were mainly adults under 65 years, married and academically well qualified and about half of them had a professional activity, with nearly one third being retired. They considered themselves happy with their life (Personal Well-being Index = 74.5%) and revealed an optimistic and positive attitude towards life, regardless of economic or social difficulties. The increased frequency of visits for gardening was positively related to a greater perception of subjective happiness. The gardeners who visited the AG more frequently considered themselves happier from a self-perspective and in comparison with peers. It can be suggested that urban organic AG represent a means for enhancing citizen well-being, contributing positively to their feelings of happiness and life satisfaction, changing behaviours and developing personal capacities. Beyond economic measures, urban AG can be recommended to capture the well-being of societies.     

Perceived importance of sustainability dimensions in the Portuguese metal industry

The growing interest of stakeholders regarding the contribution of organizations to Sustainable Development is influencing organizational behavior and strategic planning. The purpose of the present paper is to analyze the perception of the importance of organizational sustainability dimensions in a relevant economic sector: the metal industry. Survey data was collected from a sample of 211 Portuguese industries, and non-parametric statistical tests were used to validate five research hypotheses regarding the importance of the economic, environmental, social and cultural dimensions of sustainability. The results obtained demonstrate awareness of the sampled industries regarding all sustainability dimensions, recognizing that their importance has been increasing over the years, and prospecting that this importance will continue to increase in the future. The industries in this sample revealed different degrees of perceived importance for the different sustainability dimensions: the highest importance was given to the economic dimension, and culture was considered the least important sustainability dimension. However, the perception of the respondents is that these differences will be less relevant in the future. The results also show that companies with certified management systems reveal a higher perceived importance regarding sustainability dimensions. Also, industries with higher values of annual turnover, number of employees and export sales tend to give higher degrees of importance to sustainability dimensions. Considering the economic, environmental and social impacts of metal industries at an international level, the awareness of this industrial sector regarding the importance of sustainability is a relevant step to the commitment towards Sustainable Development.     

Selection and integration of environmental impacts in the Danish transport infrastructure assessment process

Transport projects have numerous consequences for the environment, society and economy, and thus an EU Directive has stated a number of impacts that need to be assessed prior to any major intervention. This paper is set in a Danish context where the EU requirements have been adopted in the Environmental Impact Assessment (EIA) regulation along with national requirements. In recent years, however, the EIAs have been criticised for an inconsistent inclusion of impacts and unclear assessment process. A selection of EIAs is for this reason reviewed and compared to the EU Directive and corresponding works in Sweden and the UK to identify potential opportunities for improvements. From the literature study, an overview table with all potential relevant impacts for transport projects is set up to assist the EIA process. For the sake of simplicity and transparency, the impacts selected from this table should, however, be further reduced in number to ensure that only the most important impacts are included in the process. To further increase simplicity and transparency in the EIA process, a novel framework for assessing different types of impacts is proposed. In this framework, a comprehensive decision support tool involving stakeholders is in focus. The framework is supplemented with a procedure for generating objectives and presenting results in an appropriate way to the many stakeholders involved. The impacts overview table and the assessment techniques are applied to a case study to illustrate the process, and finally, conclusions and perspectives for future work within the field are set out.     

A review on thermal analyses of cyclodextrins and cyclodextrin complexes

Environmental Chemistry Letters - Cyclodextrins are valuable natural or synthetically modified cyclic oligosaccharides that are widely used for ameliorating properties of biologically active...     

Limb reduction and chorion villus sampling

Upper limb reduction was diagnosed by ultrasound scan at 17 weeks after chorion villus sampling at 9 weeks' gestation. Pregnancy was terminated and necropsy confirmed limb reduction in an otherwise normal fetus. The relationship of limb reduction to amniotic band syndrome is discussed.     

Determinants of parental decisions to abort for chromosome abnormalities

Parental decisions concerning the continuation of pregnancy following prenatal detection of abnormal chromosomes were evaluated for 80 patients whose diagnosis and prenatal counselling were performed in our centre. Twenty-two anomalies were diagnosed by chorionic villus sampling (CVS) and 58 by amniocentesis. The severity of the chromosome anomaly and associated ultrasound findings in the first vs. second trimester were correlated with patients' decisions. No difference was found in the likelihood of parental decisions to interrupt or continue a pregnancy between CVS and amniocentesis for either the‘severe’ or the‘questionable’ group of chromosome anomalies. Ninety-three per cent of patients with severe prognosis and 27 per cent with questionable prognosis opted for pregnancy termination (p <0·0001). The association of ultrasound anomalies and termination was highly significant (p< 0·001). The severity of the chromosome anomaly, and, to a lesser extent, the visualization of anomalies on ultrasound were the major determinants of parental decisions to terminate the pregnancy. The diagnosis of an anomaly in the first trimester was no more likely ito lead to a termination of pregnancy than in the second trimester.