Factors affecting trace-metal bioaccumulation in Finnish headwater lakes

Fourteen unpolluted Finnish headwater lakes with pH values varying from 4.8 to 7.0 were studied for trace-metal concentrations in water, sediment, aquatic plants (Nuphar luteum L., Sparganium sp.), aquatic insect larvae (Limnophilus sp., Phryganea sp.) and fish (Esox lucius L., Perca fluviatilis L., Coregonus sp., Salvelinus fontinalis L., Salmo trutta L.). Trace-metal deposition was estimated by analysing the snowpack. Non-parametric correlation analysis was carried out between trace metal concentrations in biota and pH, ANC, TOC, CA + Mg concentration in water and a given metal concentration in water and sediment. Bioaccumulation of several trace metals increased with increasing acidity and decreasing ANC in water. This was especially true for Pb and Cd. Aquatic plants were, in general, the best indicator group concerning differences in trace-metal bioaccumulation in lakes with different acidity. There was some evidence that a higher concentration of TOC in water may reduce bioaccumulation of Pb, Cd and Zn in aquatic plants and fish. The copper concentration in sediment was the only background variable explaining Cu concentration in aquatic insects. Multivariate analysis of the whole background data gave comparable preliminary results. Over 80% of the trace metal concentrations in biota of different lakes was explained by the background variables. In general, elevated concentrations of most of these trace metals can be expected to occur in the biota of acidified low calcareous lakes.     

一种岩石地球化学勘探法—用判别分析法确定黑思斯提耳(Heath Steele)矿山的微量元素晕

一、前言 纽布朗斯威克(New Brunswick)北部许多层状硫化物矿床都产生在火成碎屑石英长石斑岩和沉积岩岩系中,这些岩石已变质为绿色片岩相。矿物蚀变如果真有的话,它都局限在岩石中矿化作用的附近;产生上盘和下盘的斑状岩石,在所研究的标本上没有差别。     

日本抗溢油应急能力逐年加强

１９７１年发生的重大溢油事故，促使日本于１９７３年和１９７６年对防止海上污染灾害法进行了两次修订。要求船主和石油行业必须配备足够数量的围油栏，吸油材料，消油剂和其它设施，以减小溢油选成的影响。     

板块运动和大陆岩浆活动

目前,地震、构造作用和岩浆活动集中在板块边缘附近。这种情况在大多数地质时期就可能如此。板块内部的大陆岩浆活动和变质作用普遍认为与大陆断裂有关,不过只有当断裂发展到横贯大陆断裂时,它们与板块边缘的关系才是明显的。本文有三个目的:第一,我们强调岩浆、构造和变质作用在大陆板块内部过去和现在都在活动,这些作用决不是只集中于板     

Scots pine needle surfaces on radial transects across the north boreal area of Finnish Lapland and the Kola Peninsula of Russia

To gain an understanding of the characteristics of the needle surfaces of naturally regenerated Scots pine (Pinus sylvestris L.) and their geographical distribution, eight physicochemical variables were investigated within the north boreal forest area. The visibly undamaged needles were collected in autumn 1990 from 114 plots (3-5 pines per plot) along radial transects from the Monchegorsk and Nikel smelters, emitting SO2 and heavy metals, on the Kola Peninsula, Russia, to Finnish Lapland. The needles were examined by scanning electron microscopy (SEM) and measured for surface wettability using the droplet contact angle (DCA) method. Significant geographical south-north and west-east patterns could be observed in needle surface characteristics, correlating with emissions from the smelters and to climate. Despite the slightly higher initial DCAs (61.4-87.6 degrees) towards the north, the pine needle surfaces of the northernmost transects exhibited higher annual needle wettability change (ANWC) and wax erosion rate (AWER), expressed as the reduction in DCAs and epistomatal wax tube distribution (WTD) during one year, respectively, but a lower occurrence of particles and fungal hyphae than those of more southern transects. The higher ANWC was related to higher atmospheric SO2 concentration, and to the lower long-term temperature sum, but not clearly to annual precipitation. In the Monchegorsk smelter area, the current needles exhibited, on average, a 15% higher WTD and seven degree larger DCA, resulting in more hydrophobic needle surfaces than in Finnish Lapland, but during their first year, both the AWER and ANWC, were greatly increased. In Finnish Lapland, 30%, of all the epistomatal wax tubes disappeared from the needle surface during the first year, the value being 70% for the pines located 8 km from the smelter. The mineral composition of the particles deposited on the needle surfaces mirrored that of the minerals being produced by the smelters (e.g. FexSx, CuFeS2, NixSx, FexOx). Stomatal densities were in the range of 71.1-141.7 stomata mm(-2). The lower densities of stomata on needles close to the smelters correlated with reduced number of needle age classes of the pines, higher dry weights, higher pollutant accumulation and lower Mn and Zn concentrations in the needles. The AWER and ANWC were able to indicate the most seriously deteriorated needle surfaces on a regional scale, e.g. including the surroundings of both smelters, although the plot-specific relationships between 'needle surface variables' and 'pollution variables' were generally weak. The present study showed that the exposure of pine needles to the combined effects of ambient pollutants and harsh climate led to a deterioration in the physicochemical characteristics of the epicuticular wax, which may have serious ecophysiological consequences in the long term.     

The uptake of particulates by an urban woodland: site description and particulate composition

Woodlands may improve local air quality by increasing the uptake rates of gaseous, particulate and aerosol pollutants from the atmosphere and can also act as relatively permanent sinks for some pollutants. Rough Wood, Walsall was selected for a study of the material which accumulates on tree foliage because of its location in a densely populated urban area, and its proximity to a motorway with high traffic flow (the M6) and to other pollutant sources. Methods were developed for leaf washing to allow determination of the quantity of dust and the identification of the dust particles present on oak leaves. Elemental analysis of particles was also undertaken using scanning electron microscopy coupled with electron probe microanalysis. A large proportion of particles were organic in origin. Of the inorganic particles, the majority contained silicon and aluminium in varying proportions suggesting that they were soil derived. Some particles were clearly identified as the products of combustion, and sea or road salt was present on leaf surfaces. Some particles contained copper, tin and titanium which may reflect the proximity of Rough Wood to local metal workings. The number of particles counted on leaf surfaces decreased as distance from the motorway increased.     

Mute swans, Cygnus olor, killed from collision with electrical wires, a study of two situations in Sweden

Different studies indicate that 19-38% of the Swedish ringed Mute Swans (Cygnus olor) are killed by collision with electrical wires. The relative frequency of killed swans is not related to the density or type of electrical wires in the landscape, but to where in the landscape the wires are constructed, and to the time when mass movements of swans occur. Experience (age), bodyweight ("too heavy to raise"), breast muscle weakening ("engine problems") and heavy metal (lead) loads strongly affect the chances of birds avoiding collision; but, swans not belonging to these risk-groups are also killed. Different skeletal injuries were found in dead birds after collision but many of them were not lethal. It was proved, however, that most collision-birds ultimately died from liver damage, probably caused by their heavy bodies hitting the ground.     

Effects of population density and cadmium toxicity on growth and survival of blowflies

The blowfly Lucilia sericata has been reared on artificial diets containing from 0 to 200 mg Cd kg(-1) at population densities ranging from 8 larvae per 4-g diet to 8 larvae per 32-g diet. Peak larval weight, development period, pupal weight, adult-emergence weight, and fecundity were measured. Larvae of blowflies respond to food deprivation by a reduction in larval weight and subsequent pupal and adult size. Contaminating the food supply with cadmium produced similar additive effects, reduced the growth rate, and increased the age of pupation. The results are of importance in determining the effects of environmental pollutants on population dynamics.