Effect of development on water quality for seven streams in North Carolina

In this study, baseflow and storm discharges were monitored in seven watersheds of varying development density to document the effects of development on stream water quality. In addition, two of the watersheds contained package wastewater treatment facilities, which were evaluated as an alternative to residential on-site septic systems. Monthly grab samples of baseflow and flow-proportional samples of storm event discharge were collected and analyzed for nitrogen, phosphorus, sediment, and bacteria. For the five watersheds without wastewater treatment facilities, a significant linear relationship was documented between fecal coliform and enterococci levels in baseflow samples and the percentage of residential or impervious area. For the two watersheds with wastewater discharge, bacteria levels were significantly greater than those from the two relatively undeveloped watersheds. These results indicate that bacteria levels increased with increasing residential development even if many of the septic systems were replaced by a community wastewater treatment system. Computed annual export rates for ammonia nitrogen (NH₃-N) were correlated to the percentage of impervious surfaces in the watersheds, while the rates for other nitrogen forms, total phosphorus, and total suspended sediment were not. Annual export rates from the two mostly undeveloped watersheds were greater than a compilation of rates for undeveloped areas across the USA. Export from the four watersheds with more than 68 % residential land use was less than those reported from local and national studies of residential areas.     

Assessment of oxidative stress markers and concentrations of selected elements in the leaves of Cassia occidentalis growing wild on a coal fly ash basin

Assessment of oxidative stress levels and tissue concentrations of elements in plants growing wild on fly ash basins is critical for realistic hazard identification of fly ash disposal areas. Hitherto, levels of oxidative stress markers in plants growing wild on fly ash basins have not been adequately investigated. We report here concentrations of selected metal and metalloid elements and levels of oxidative stress markers in leaves of Cassia occidentalis growing wild on a fly ash basin (Badarpur Thermal Power Station site) and a reference site (Garhi Mandu Van site). Plants growing on the fly ash basin had significantly high foliar concentration of As, Ni, Pb and Se and low foliar concentration of Mn and Fe compared to the plants growing on the reference site. The plants inhabiting the fly ash basin showed signs of oxidative stress and had elevated levels of lipid peroxidation, electrolyte leakage from cells and low levels of chlorophyll a and total carotenoids compared to plants growing at the reference site. The levels of both protein thiols and nonprotein thiols were elevated in plants growing on the fly ash basin compared to plants growing on the reference site. However, no differences were observed in the levels of cysteine, reduced glutathione and oxidized glutathione in plants growing at both the sites. Our study suggests that: (1) fly ash triggers oxidative stress responses in plants growing wild on fly ash basin, and (2) elevated levels of protein thiols and nonprotein thiols may have a role in protecting the plants from environmental stress.     

Automated riverine landscape characterization: GIS-based tools for watershed-scale research, assessment, and management

River systems consist of hydrogeomorphic patches (HPs) that emerge at multiple spatiotemporal scales. Functional process zones (FPZs) are HPs that exist at the river valley scale and are important strata for framing whole-watershed research questions and management plans. Hierarchical classification procedures aid in HP identification by grouping sections of river based on their hydrogeomorphic character; however, collecting data required for such procedures with field-based methods is often impractical. We developed a set of GIS-based tools that facilitate rapid, low cost riverine landscape characterization and FPZ classification. Our tools, termed RESonate, consist of a custom toolbox designed for ESRI ArcGIS®. RESonate automatically extracts 13 hydrogeomorphic variables from readily available geospatial datasets and datasets derived from modeling procedures. An advanced 2D flood model, FLDPLN, designed for MATLAB® is used to determine valley morphology by systematically flooding river networks. When used in conjunction with other modeling procedures, RESonate and FLDPLN can assess the character of large river networks quickly and at very low costs. Here we describe tool and model functions in addition to their benefits, limitations, and applications.     

Distribution of radionuclides in surface soils, Singhbhum Shear Zone, India and associated dose

Gamma emitters were estimated in surface soils from a mineralized zone in Eastern India using high purity Germanium detector-based high resolution gamma spectrometry system. Activities of ²³⁸U, ²²⁶Ra, ²³²Th, ²³⁵U, ²²⁷Th, ^234mPa, ²¹⁰Pb, ⁴⁰K, and ¹³⁷Cs were 79?±?50, 81?±?53, 65?±?23, 4?±?2, 5?±?4, 92?±?50, 97?±?45, 517?±?201, and 4?±?2 Bq/kg, respectively. Most radionuclides were observed to follow log-normal distribution. The correlation between physicochemical properties of the samples, like pH, organic matter content, particle size, and moisture content were also studied. Activity ratios of ²²⁶Ra/²³⁸U, ²¹⁰Pb/²²⁶Ra, and ²²⁷Th/²³⁵U indicated deviation from secular equilibrium in some samples. The associated annual effective dose ranged from 0.07 to 0.24 mSv and the mean was calculated to be 0.12?±?0.04 mSv for this region, indicating it to be one of normal natural background radiation.     

Using variance components to estimate power in a hierarchically nested sampling design

We used variance components to assess allocation of sampling effort in a hierarchically nested sampling design for ongoing monitoring of early life history stages of the federally endangered Devils Hole pupfish (DHP) (Cyprinodon diabolis). Sampling design for larval DHP included surveys (5 days each spring 2007–2009), events, and plots. Each survey was comprised of three counting events, where DHP larvae on nine plots were counted plot by plot. Statistical analysis of larval abundance included three components: (1) evaluation of power from various sample size combinations, (2) comparison of power in fixed and random plot designs, and (3) assessment of yearly differences in the power of the survey. Results indicated that increasing the sample size at the lowest level of sampling represented the most realistic option to increase the survey’s power, fixed plot designs had greater power than random plot designs, and the power of the larval survey varied by year. This study provides an example of how monitoring efforts may benefit from coupling variance components estimation with power analysis to assess sampling design.     

An Approach to Reaeration Coefficient Modeling in Local Surface Water Quality Monitoring

Reaeration coefficient (k ₂) for River Atuwara, Ogun State, Nigeria was calculated from dissolved oxygen and biochemical oxygen demand data collected over period of 3 months covering the two prevailing climatic seasons in the country. Both the Akaike and Bayesian information criteria were used in the selection and analysis of ten models to identify the most suitable reaeration coefficient (k ₂) model for Atuwara River. Models that passed the confidence limit were subjected to model evaluation using measures of agreement between observed and predicted data such as percent bias, Nash–Sutcliffe efficiency, and root mean square observation standard deviation ratio. The used approach yield better results than empirical models developed for local conditions while it is also useful in conserving scarce resources.     

Risk analysis and assessment methodologies in the work sites: On a review, classification and comparative study of the scientific literature of the period 2000-2009

The objective of this work is to determine and study, analyze and elaborate, classify and categorize the main risk analysis and risk-assessment methods and techniques by reviewing the scientific literature. The paper consists of two parts: a) the investigation, presentation and elaboration of the main risk-assessment methodologies and b) the statistical analysis, classification, and comparative study of the corresponding scientific papers published by six representative scientific journals of Elsevier B.V. covering the decade 2000-2009. The scientific literature reviewing showed that the risk analysis and assessment techniques are classified into three main categories: (a) the qualitative, (b) the quantitative, and (c) the hybrid techniques (qualitative-quantitative, semi-quantitative). The qualitative techniques are based both on analytical estimation processes, and on the safety managers-engineers ability. According to quantitative techniques, the risk can be considered as a quantity, which can be estimated and expressed by a mathematical relation, under the help of real accidents’ data recorded in a work site. The hybrid techniques, present a great complexity due to their ad hoc character that prevents a wide spreading. The statistical analysis shows that the quantitative methods present the highest relative frequency (65.63%) while the qualitative a lower one (27.68%). Furthermore the hybrid methods remain constantly at a very low level (6.70%) during the entire processing period.     

On the development of a new hybrid risk assessment process using occupational accidents’ data: Application on the Greek Public Electric Power Provider

The occupational accidents have a major impact upon human integrity and also bring about high costs for the social health and insurance system of a country. In addition, risk analysis is an essential process for the safety policy of a company, having as main aim the effacement of any potential of damage in a productive procedure, while the quantified risk evaluation is the most crucial part of the whole procedure of assessing hazards in the work. The main goal of this study is double: a) the development and presentation of a new hybrid risk assessment process (HRAP) and b) the application of HRAP in the Greek Public Power Corporation (PPC) (the unique electric power provider and the largest industry in Greece), by using occupational accidents that have been recorded, during the 12-year period of 1993-2004. The new process consists of four distinct phases a) the hazard sources’ identification phase, b) the risk consideration phase, c) the risk-evaluation phase, and d) the phase of the risk assessment and safety-related decision making. The results show that in some cases the risk value has been calculated in PPC to be higher than 500 (in the risk rating of 0-1000), which imposes the taking of suppressive measures for abolishing the danger source, while the fatal accident frequency rate (per 10⁸ man-hrs) is FAFR ≅ 2.4.     

The relationship between the implementation of a Safety Management System and the attitudes of employees towards unsafe acts in aviation

Airports represent highly complex organisations, incorporating such interdependent operations as airlines, ground transport, flight services, ground services, refueling, maintenance, customer services, catering, administration and security. Airports, and especially International Airports, must ensure that their operations are conducted in a safe and efficient manner, as the consequence of any error or failure during operations has the potential for catastrophic outcomes. The international governing body for air transportation, ICAO, requires that airports must implement a Safety Management System as a means of ensuring safe operations and eliminating or reducing the likelihood of low frequency/high consequence incidents. This research project sought to determine the extent to which the implementation of a Safety Management System (SMS) influenced the attitudes of airport employees toward unsafe acts. The hypothesis tested was that the implementation of an SMS into an airport will result in an improvement in attitudes toward safety. A Safety Culture Survey was utilized to measure these attitudes. Two International Airports were chosen to measure the extent to which the introduction of an SMS at one airport would influence the safety attitude and culture of those employees. Sharjah International Airport, UAE, was used as the experimental group, as it did not have a formal SMS in operation, with another English-speaking International Airport (the Second Airport) being used as a control group, as it already had an SMS in operation. A Safety Culture Survey was used as the pre and post-test measure over a 12-month period to determine the extent of influence of the introduction of the SMS at Sharjah Airport. The results of Phase 1 of the survey (June 2008) were compared against the results of Phase 2 of the survey (June 2009). The average score reported by participants at Sharjah Airport increased significantly from pre-test measure to post-test measure in relation to communication, safety rules, supportive environment, personal risk appreciation, work environment, and involvement. At the same time, the average score for personal priorities decreased significantly from Phases 1 to 2. Results indicate that participants at Sharjah Airport recorded a significant positive shift in attitude to the safety factors covered in the Safety Culture Survey, whilst at the same time responses from the Second Airport showed no such shift in attitude. The Second Airport showed neither decline nor improvement in responses. Whilst some methodological issues were identified, the results were of sufficient strength as to conclude that the outcomes reported support the hypothesis that the introduction of an SMS at Sharjah Airport has effected positive changes not observed at the Second Airport. Recommendations for ongoing research were made to further explore the strength of relationship between SMS and safety attitudes, as well as the relationship between safe attitude and safe behaviour.