Lethal effects of abamectin on the aquatic organisms Daphnia similis, Chironomus xanthus and Danio rerio

Abamectin is used as an acaricide and insecticide for fruits, vegetables and ornamental plants, as well as a parasiticide for animals. One of the major problems of applying pesticides to crops is the likelihood of contaminating aquatic ecosystems by drift or runoff. Therefore, toxicity tests in the laboratory are important tools to predict the effects of chemical substances in aquatic ecosystems. The aim of this study was to assess the potential hazards of abamectin to the freshwater biota and consequently the possible losses of ecological services in contaminated water bodies. For this purpose, we identified the toxicity of abamectin on daphnids, insects and fish. Abamectin was highly toxic, with an EC₅₀ 48 h for Daphnia similis of 5.1 ng L⁻¹, LC₅₀ 96 h for Chironomus xanthus of 2.67 μg L⁻¹ and LC₅₀ 48 h for Danio rerio of 33 μg L⁻¹.     

Aquatic environments polluted with antibiotics and heavy metals: a human health hazard

Aquatic environments often receive wastewater containing pollutants such as antibiotics and heavy metals from hospital sewage, as well as contaminants from soil. The presence of these pollutants can increase the rate of exchange of resistant genes between environmental and pathogenic bacteria, which can make the treatment of various types of bacterial infections in humans and animals difficult, in addition to causing environmental problems such as ecological risk. In this study, two tetracycline-resistant Pseudomonas aeruginosa (EW32 and EW33), isolated from aquatic environments close to industries and a hospital in southeastern Brazil, were investigated regarding the possible association between tetracycline and heavy metal resistance. The isolate EW32 presented a conjugative plasmid with coresistance to tetracycline and copper, reinforcing the concern that antibiotic resistance by acquisition of plasmids can be induced by the selective pressure of heavy metals in the environment.     

Newborns and low to moderate prenatal environmental lead exposure: might fathers be the key?

This study is part of the BioMadrid Project, a bio-monitoring study designed to assess pollutants in the environment surrounding children born in the Madrid region. Our aim in this report is to evaluate the association between prenatal lead exposure and fetal development using three biological samples (maternal and paternal blood lead at around 34 weeks of gestation as well as cord blood lead levels), three biomarkers of effect in cord blood peripheral lymphocytes (micronucleus in binucleated cells, nucleoplasmic bridges, and nuclear buds), and different anthropometrical characteristics at birth. Maternal and cord blood lead were not associated with newborn measurements or genotoxicity biomarkers. In contrast, increases in father blood lead were coupled with lower weight (mean difference (MD), ?110.8 g; 95 % confidence intervals (95%CI), ?235.6 to 6.00; p?<?0.10) and shorter abdominal (MD, ?0.81 cm; 95%CI, ?1.64 to 0.00; p?<?0.05) and cephalic (MD, ?0.32 cm; 95%CI, ?0.65 to 0.00; p?<?0.05) circumferences at birth as well as with the presence of nucleoplasmic bridges (odds ratio, 1.03; 95%CI, 1.00 to 1.06; p?<?0.05) and nuclear buds (odds ratio, 1.02; 95%CI, 0.99 to 1.04; p?<?0.10). These associations were mainly confined to female babies, in whom paternal lead was also inversely associated with length. Our results support the hypothesis that paternal lead exposure may be affecting the development of newborns.     

Improvement of health risk factors after reduction of VOC concentrations in industrial and urban areas

After reductions of fugitive and diffuse emissions by an industrial complex, a follow-up study was performed to determine the time variability of volatile organic compounds (VOCs) and the lifetime cancer risk (LCR). Passive samplers (3 M monitors) were placed outdoors (n?=?179) and indoors (n?=?75) in industrial, urban, and control areas for 4 weeks. Twenty-five compounds including n-alkanes, cycloalkanes, aromatics, chlorinated hydrocarbons, and terpenes were determined by GC/MS. The results show a significant decrease of all VOCs, especially in the industrial area and to a lesser extent in the urban area. The median outdoor concentration of benzene in the industrial area declined compared to the former study, around 85 % and about 50 % in the urban area, which in the past was strongly influenced by industrial emissions. Other carcinogenic compounds like styrene and tetrachloroethylene were reduced to approximately 60 %. VOC concentrations in control areas remained nearly unchanged. According to the determined BTEX ratios and interspecies correlations, in contrast to the previous study, traffic was identified as the main emission source in the urban and control areas and showed an increased influence in the industrial area. The LCR, calculated for benzene, styrene, and tetrachloroethylene, shows a decrease of one order of magnitude in accordance to the decreased total VOC concentrations and is now acceptable according to values proposed by the World Health Organization.     

Solar CPC pilot plant photocatalytic degradation of bisphenol A in waters and wastewaters using suspended and supported-TiO2. Influence of photogenerated species

Photocatalytic degradation of bisphenol A (BPA) in waters and wastewaters in the presence of titanium dioxide (TiO₂) was performed under different conditions. Suspensions of the TiO₂ were used to compare the degradation efficiency of BPA (20 mg L^?1) in batch and compound parabolic collector (CPC) reactors. A TiO₂ catalyst supported on glass spheres was prepared (sol–gel method) and used in a CPC solar pilot plant for the photodegradation of BPA (100 μg L^?1). The influence of OH·, O₂ ^·?, and h ⁺ on the BPA degradation were evaluated. The radicals OH· and O₂ ^·? were proved to be the main species involved on BPA photodegradation. Total organic carbon (TOC) and carboxylic acids were determined to evaluate the BPA mineralization during the photodegradation process. Some toxicological effects of BPA and its photoproducts on Eisenia andrei earthworms were evaluated. The results show that the optimal concentration of suspended TiO₂ to degrade BPA in batch or CPC reactors was 0.1 g L^?1. According to biological tests, the BPA LC₅₀ in 24 h for E. andrei was of 1.7?×?10^?2 mg cm^?2. The photocatalytic degradation of BPA mediated by TiO₂ supported on glass spheres suffered strong influence of the water matrix. On real municipal wastewater treatment plant (MWWTP) secondary effluent, 30 % of BPA remains in solution; nevertheless, the method has the enormous advantage since it eliminates the need of catalyst removal step, reducing the cost of treatment.     

Effectiveness evaluation of glyphosate oxidation employing the H2O2/UVC process: Toxicity assays with Vibrio fischeri and Rhinella arenarum tadpoles

The H₂O₂/UVC process was applied to the photodegradation of a commercial formulation of glyphosate in water. Two organisms (Vibrio fischeri bacteria and Rhinella arenarum tadpoles) were used to investigate the toxicity of glyphosate in samples M_1, M₂, and M₃ following different photodegradation reaction times (120, 240 and 360 min, respectively) that had differing amounts of residual H₂O₂. Subsamples of M₁, M₂, and M₃ were then used to create samples M_1,E, M_2,E and M_3,E in which the H₂O₂ had been removed. Acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) activities were measured in tadpoles to determine possible sub-lethal effects. In V. fischeri, M_1,E, which was collected early in the photodegradation process, caused 52% inhibition, while M_3,E, which was collected at the end of the photodegradation process, caused only 17% inhibition. Survival of tadpoles was 100% in samples M₂, M₃, and in M_1,E, M_2,E and M_3,E. The lowest percentages of enzymatic inhibition were observed in samples without removal of H₂O₂: 13.96% (AChE) and 16% (BChE) for M₂, and 24.12% (AChE) and 13.83% (BChE) for M₃. These results show the efficiency of the H₂O₂/UVC process in reducing the toxicity of water or wastewater polluted by commercial formulations of glyphosate. According to the ecotoxicity assays, the conditions corresponding to M₂ (11 ± 1 mg a.e. L^?1 glyphosate and 11 ± 1 mg L^?1 H₂O₂) could be used as a final point for glyphosate treatment with the H₂O₂/UV process.     

Water quality modelling of Lis River, Portugal

The aim of the study was to predict the impact of flow conditions, discharges and tributaries on the water quality of Lis River using QUAL2Kw model. Calibration of the model was performed, based on data obtained in field surveys carried out in July 2004 and November 2006. Generally the model fitted quite well the experimental data. The results indicated a decrease of water quality in the downstream area of Lis River, after the confluence of Lena, Milagres and Amor tributaries, as a result of discharges of wastewaters containing degradable organics, nutrients and pathogenic organisms from cattle-raising wastewaters, domestic effluents and agricultural runoff. The water quality criteria were exceeded in these areas for dissolved oxygen, biochemical oxygen demand, total nitrogen and faecal coliforms. Water quality modelling in different scenarios showed that the impact of tributaries on the quality of Lis River water was quite negligible and mainly depends on discharges, which are responsible by an increase of almost 45, 13 and 44 % of ultimate carbonaceous biochemical oxygen demand (CBOD_u), ammonium nitrogen and faecal coliforms, for winter simulation, and 23, 33 and 36 % for summer simulation, respectively, when compared to the real case scenario.     

Removal of Hydrocarbons from Wastewater Using Treated Bark

ABSTRACT

This paper explores the possibility of removing hydrocarbons (HCs) and trace elements from synthetic and industrial effluents using treated bark as biosorbent. Coniferous bark was treated either chemically (Tc) or biologically (Tb) to eliminate soluble organic compounds of bark. The removal efficiency (RE) of the HCs from a synthetic oil-water mixture containing spent diesel motor oil exceeds 95% using 2 g/L of treated bark mixed with a synthetic oil-water mixture containing 2 g/L of spent oil. Under these conditions, the retention capacity (RC) was ~1 g HC/g dry substrate. The sorption reaction seems to be quasi-instantaneous, and the retention capacity of spent oil on treated bark increases as the temperature augments. This implies that the retention mechanism is related to the capillary action.

Results of Fourier transform infrared (FTIR) spectros-copy indicate that spent oil is mainly composed of al-kanes. They also suggest that no chemical bonds between

Tc and spent oil were established. Measurement of the surface tension of spent oil and the wetting index of the bark suggests that only spent oil will be retained by the substrate. Treatment of an industrial effluent containing 14.4 g/L of total HCs was performed using Tc. It was possible to remove 97% of HCs and retain some trace elements such as Al, Ca, Fe, Mg, S, and so on.     

Valorisation of forestry waste by pyrolysis in an auger reactor

Pyrolysis of forestry waste has been carried out in an auger reactor to study the influence of operational variables on the reactor performance and the properties of the related products. Pine woodchips were used for the first time as raw material and fed continuously into the reactor. Ten experiments were carried out under inert atmosphere at: (i) different reaction temperature (1073, 973, 873, 823 and 773 K); (ii) different solid residence time (5, 3, 2 and 1.5 min); and (iii) different biomass flow rate (3.9, 4.8 and 6.9 kg/h). Results show that the greatest yields for liquid production (59%) and optimum product characterisation were obtained at the lowest temperature studied (773 K) and applying solid residence times longer than 2 min. Regarding bio-oil properties, GC/MS qualitative identification show that the most abundant compounds are volatile polar compounds, phenols and benzenediols; and very few differences can be observed among the samples regardless of the pyrolysis operating conditions. On the whole, experimental results demonstrate that complete reaction of forest woodchips can be achieved in an auger reactor in most of the experimental conditions tested. Moreover, this study presents the initial steps for the future scaling up of the auger reactor with the aim of converting it into a mobile plant which will be able to remotely process biomass such as energy crops, forestry and agricultural wastes to obtain bio-oil that, in turn, can be used as energy vector to avoid high transport costs.     

Metabolic responses of Eisenia fetida after sub-lethal exposure to organic contaminants with different toxic modes of action

Nuclear magnetic resonance (NMR) - based metabolomics has the potential to identify toxic responses of contaminants within a mixture in contaminated soil. This study evaluated the metabolic response of Eisenia fetida after exposure to an array of organic compounds to determine whether contaminant-specific responses could be identified. The compounds investigated in contact tests included: two pesticides (carbaryl and chlorpyrifos), three pharmaceuticals (carbamazephine, estrone and caffeine), two persistent organohalogens (Aroclor 1254 and PBDE 209) and two industrial compounds (nonylphenol and dimethyl phthalate). Control and contaminant-exposed metabolic profiles were distinguished using principal component analysis and potential contaminant-specific biomarkers of exposure were found for several contaminants. These results suggest that NMR-based metabolomics offers considerable promise for differentiating between the different toxic modes of action (MOA) associated with sub-lethal toxicity to earthworms.