Determination of resin acids during production of wood pellets--a comparison of HPLC/ESI-MS with the GC/FID MDHS 83/2 method

Resin acids are constituents of natural and technical products of widespread use. Exposure is known to cause health effects in the airways and on the skin. Liquid chromatography/positive ion electrospray-mass spectrometry (HPLC/pos ESI-MS) was investigated for determination of 7-oxodehydroabietic (7-OXO), dehydroabietic (DHAA) and abietic acid (AA) in wood dust-containing air samples as a derivatisation-free alternative to the GC/FID HSE method 83/2, developed by the Health and Safety Executive UK. The resin acid 7-OXO was measured as a marker for oxidised resin acids, which are known to be the main contact allergens in colophonium. The found detection limits were 0.42 ng m(-3) for 7-OXO, 5.2 ng m(-3) for DHAA and 9.4 ng m(-3) for AA, respectively, which are considerably lower than with the GC/FID method (24, 115 and 89 ng m(-3)). The two methods correlated well, although consistently and significantly lower concentrations of 7-OXO were detected with LC/MS. The higher concentration of this compound with MDHS 83/2 is suggested to be an artefact from the derivatisation step in the presence of soluble wood dust remains.     

Determination of hydrocarbons in old creosote contaminated soil using headspace solid phase microextraction and GC-MS.

Headspace solid phase microextraction (HS-SPME) has been used together with GC-MS to analyze organic substances directly in a soil, heavily contaminated with PAHs/creosote (approximately 300 mg/kg soil), from an old gaswork site in Stockholm, Sweden. The HS-SPME results, both qualitative and quantitative, were compared with traditional liquid extraction using ethyl acetate/hexane (20:80). It was shown that the concentrations determined with HS-SPME at 60 degrees C correlated well, for compounds containing up to two and three aromatic rings (naphthalenes, acenaphthene, acenaphthylene and fluorenes, while a lower concentration was obtained for phenanthrene, anthracene, fluoranthene and pyrene. The total concentrations for each compound determined with HS-SPME ranged from 2 to 25 microg/g soil. Quantification was done using standard addition of compounds directly to the soil samples. The bioavailable fraction of the compounds in the contaminated soil at 20 degrees C was analyzed using external calibration by spiking sterile uncontaminated sand (same texture and particle size as the contaminated soil but without a heavily sorbed organic fraction) with hydrocarbon standards in different concentrations. Storage of exposed fibers at 20 degrees C showed that analysis should be done within two days to make qualitative measurements and earlier (as soon as possible) for quantitative determinations.     

Exposure to benzene,toluene, xylenes and total hydrocarbons among snowmobile drivers in Sweden

The exposure to benzene, toluene, xylenes and total hydrocarbons among 25 individuals exposed to exhaust from a snowmobile equipped with a two-stroke engine has been evaluated. Sampling was performed by pumped and diffusive sampling in parallel. There was a relatively bad agreement between the two air-sampling methods. The bad agreement can in part be explained by back diffusion of the substances from the samplers, a high face velocity, and deposition of droplets of unburned gasoline onto or in the vicinity of the samplers.

The levels of benzene ranged from not detectable (0.01 mg m⁻³) to 2.5 mg m⁻³. For toluene, xylenes and total hydrocarbons the exposure was 0.10–12.0, 0.05–13.0 and 0.90–273 mg m⁻³ respectively. The result from two measurements on individuals travelling on an open sleigh at the rear of the vehicle indicated higher levels of benzene, 0.7–0.8 mg m⁻³. Children are often riding as a passenger on a sledge and may thus have a higher exposure than their parents. This study indicates that spare time driving a snowmobile may cause a considerable exposure to benzene. Using a four-stroke engine equipped with a catalyst could reduce the exposure. To reduce the exposure for the passenger on a sleigh an extension of the exhaust pipe may be effective.     

Secretor Status is Associated with Susceptibility to Disease in a Large GII.6 Norovirus Foodborne Outbreak

Food and Environmental Virology - Norovirus is commonly associated with food and waterborne outbreaks. Genetic susceptibility to norovirus is largely dependent on presence of histo-blood group...     

Perfluoroalkyl substances (PFASs) in food and water from Faroe Islands

Diet and drinking water are suggested to be major exposure pathways for perfluoroalkyl substances (PFASs). In this study, food items and water from Faroe Islands sampled in 2011/2012 were analyzed for 11 perfluoroalkyl carboxylic acids (PFCAs) and 4 perfluoroalkane sulfonic acids (PFSAs). The food samples included milk, yoghurt, crème fraiche, potatoes, fish, and fish feed, and the water samples included surface water and purified drinking water. In total, nine PFCAs and four PFSAs were detected. Generally, the levels of PFAS were in the lower picogram per gram range. Perfluorobutanoic acid was a major contributor to the total PFASs concentration in water samples and had a mean concentration of 750 pg/L. Perfluoroundecanoic acid (PFUnDA) was predominating in milk and wild fish with mean concentrations of 170 pg/g. Perfluorooctane sulfonic acid (PFOS) was most frequently detected in food items followed by PFUnDA, perfluorononanoic acid, and perfluorooctanoic acid (PFOA). Levels of PFUnDA and PFOA exceeded those of PFOS in milk and fish samples. Prevalence of long-chain PFCAs in Faroese food items and water is confirming earlier observations of their increase in Arctic biota. Predominance of short-chain and long-chain homologues indicates exposure from PFOS and PFOA replacement compounds.     

Influence of seat geometry and seating posture on NIC(max) long-term AIS 1 neck injury predictability

OBJECTIVE: Validated injury criteria are essential when developing restraints for AIS 1 neck injuries, which should protect occupants in a variety of crash situations. Such criteria have been proposed and attempts have been made to validate or disprove these. However, no criterion has yet been fully validated. The objective of this study is to evaluate the influence of seat geometry and seating posture on the NIC(max) long-term AIS 1 neck injury predictability by making parameter analyses on reconstructed real-life rear-end crashes with known injury outcomes. METHODS: Mathematical models of the BioRID II and three car seats were used to reconstruct 79 rear-end crashes involving 110 occupants with known injury outcomes. Correlations between the NIC(max) values and the duration of AIS 1 neck injuries were evaluated for variations in seat geometry and seating posture. Sensitivities, specificities, positive predictive values, and negative predictive values were also calculated to evaluate the NIC(max) predictability. RESULTS: Correlations between the NIC(max) values and the duration of AIS 1 neck injuries were found and these relations were used to establish injury risk curves for variations in seat geometry and seating posture. Sensitivities, specificities, positive predictive values, and negative predictive values showed that the NIC(max) predicts long-term AIS 1 neck injuries also for variations in seat geometry and seating postures. CONCLUSION: The NIC(max) can be used to predict long-term AIS 1 neck injuries.     

Dermal exposure to monoterpenes during wood work

The dermal exposure to the suspected allergenic monoterpenes [small alpha]-pinene, [small beta]-pinene and [capital Delta](3)-carene was assessed with a patch sampling technique. The patch used was made of activated charcoal sandwiched between two layers of cotton cloth. Patches were fastened at 12 different spots on a sampling overall and at the front of a cap to estimate the potential exposure of the body. Fastening two patches on a cotton glove, one patch representing the dorsal side and one patch representing the palm of the hand respectively, assessed the exposure on the hands. Sampling was carried out during collecting of pine and spruce boards in sawmills and during sawing of pine wood pieces in joinery shops respectively. The potential dermal exposure of the total body was 29.0-1 890 mg h(-1) with a geometric mean (GM) of 238 mg h(-1) during sawing. During collecting the GM was estimated to 100 mg h(-1) with a range of 12.2-959 mg h(-1). The hands had a mean exposure of 9.24 mg h(-1) during sawing and 3.25 mg h(-1) during collecting respectively. The good correlation between the mass of contamination on the individual body parts and the potential body exposure indicates that sampling can be performed on one body part to give a good estimation of the potential body exposure. Monoterpenes were detected at patches fastened underneath the protective clothing indicating a contamination of the skin of the worker. The patch used may overestimate the dermal exposure.     

Modeling riverine nutrient transport to the Baltic Sea: a large-scale approach

We developed for the first time a catchment model simulating simultaneously the nutrient land-sea fluxes from all 105 major watersheds within the Baltic Sea drainage area. A consistent modeling approach to all these major watersheds, i.e., a consistent handling of water fluxes (hydrological simulations) and loading functions (emission data), will facilitate a comparison of riverine nutrient transport between Baltic Sea subbasins that differ substantially. Hot spots of riverine emissions, such as from the rivers Vistula, Oder, and Daugava or from the Danish coast, can be easily demonstrated and the comparison between these hot spots, and the relatively unperturbed rivers in the northern catchments show decisionmakers where remedial actions are most effective to improve the environmental state of the Baltic Sea, and, secondly, what percentage reduction of riverine nutrient loads is possible. The relative difference between measured and simulated fluxes during the validation period was generally small. The cumulative deviation (i.e., relative bias) [Sigma(Simulated - Measured)/Sigma Measured x 100 (%)] from monitored water and nutrient fluxes amounted to +8.2% for runoff, to -2.4% for dissolved inorganic nitrogen, to +5.1% for total nitrogen, to +13% for dissolved inorganic phosphorus and to +19% for total phosphorus. Moreover, the model suggests that point sources for total phosphorus compiled by existing pollution load compilations are underestimated because of inconsistencies in calculating effluent loads from municipalities.     

SALSA: a simulation tool to assess ecological sustainability of agricultural production

In order to assess the ecological sustainability of agricultural production systems, there is a need for effective tools. We describe an environmental systems analysis tool called SALSA (Systems Ana/ysis for Sustainable Agriculture). It consists of substance/material flow models in which the simulation results are interpreted with life-cycle assessment methodology. The application of SALSA is demonstrated in a case study in which three different ways of producing pigs are compared with respect to energy input and the environmental impacts of global warming, eutrophication, and acidification. The scenario that combined a low-protein diet without soy meal with an improved manure-management technique with low nitrogen losses was the best for all impact categories studied. The strength of the SALSA models was their capacity to capture consequences of management options that had an influence on several processes on a farm, which enabled the type of complex studies we describe.     

Molecular orbital studies on brominated diphenyl ethers. Part I--conformational properties

Polybrominated diphenyl ethers (PBDEs) are widely used as additive flame retardants and quantities in the environment are on the rise. Because they are structurally related to polychlorinated biphenyls and also to thyroid hormones, there is serious concern that PBDEs may pose a danger to human health. Knowledge of their conformational properties is key to assessing their environmental fate and risk. The conformational properties of PBDEs were investigated by quantum chemical methods including semiempirical self-consistent field molecular orbital (SCF-MO), ab initio SCF-MO and density functional theory (DFT). Conformational analyses of model congeners 2,2',4,6'-tetrabromodiphenyl ether and 2,3,4,4',5,6-hexabromodiphenyl ether, based on energy maps calculated by semiempirical AM1 method, may indicate that all PBDE congeners except those with the tetra-ortho-bromination are conformationally flexible (or soft) due to low energy barriers for interconversion of stable conformers. The results of the conformational analyses are in conformity with recently published X-ray crystallographic data. For comparison with the results of the semiempirical method, higher level ab initio and DFT models were applied as well. The optimized geometries all lie well inside low energy regions on the maps and thus also ascertain the semiempirical calculations. According to computed geometric parameters and net atomic charges, the model B3LYP/3-21G* seemed to give better results than B3LYP/6-31G* and HF/6-31G*.