Concentrations and Pools of Heavy Metals in Urban Soils in Stockholm,Sweden

The concentrations of heavy metals (Cd, Cr, Cu, Hg, Ni, Pb andZn) and arsenic (As) were surveyed and the metal pools estimatedin soils in Stockholm Municipality. The sampling sites were distributed all over the entire municipality with a higher sampling density in the city centre. Soils were sampled to a maximum depth of 25 to 60 cm. Soil texture, total-C content, electrical conductivity and pH were analysed. Heavy metal concentrations were determined after wet digestion with boiling7 M HNO₃.The results showed a wide range in heavy metal concentrations, as well as in other soil properties. The city centre soils constituted a rather homogeneous group whereas outside this areano geographical zones could be distinguished. These soils were grouped based on present land use, i.e. undisturbed soils, public parks, wasteland (mainly former industrial areas), and roadside soils. The city centre and wasteland soils generally hadenhanced heavy metal concentrations to at least 30 cm depth compared to park soils outside the city centre and rural (arable)soils in the region, which were used to estimate background levels. For example, the mean Hg concentration was 0.9 (max 3.3)mg kg^-1 soil at 0–5 cm and 1.0 (max 2.9) at 30 cm depth in the city centre soils, while the background level was 0,04 mg kg^-1. Corresponding values for Pb were 104 (max 444) and135 (max 339) mg kg^-1, at 0–5 and 30 cm, respectively, while the background level was 17 mg kg^-1.The average soil pools (0–30 cm depth) of Cu, Pb and Zn were 21,38 and 58 g m^-2 respectively, which for Pb was 3–4 timeshigher and for Cu and Zn 1.5–2 times higher than the backgroundlevel. The total amount of accumulated metals (down to 30 cm)in the city centre soils (4.5^*10 ⁶ m² public gardens and green areas) was estimated at 80, 1.1, 120 and 40 t for Cu, Hg, Pb and Zn, respectively. The study showed (1) thatfrom a metal contamination point of view, more homogeneous soilgroups were obtained based on present land use than on geographicdistance to the city centre, (2) the importance of establishing a background level in order to quantify the degree of contamination, and (3) soil samples has to be taken below the surface layer (and deeper than 30 cm) in order to quantify theaccumulated metal pools in urban soils.     

Strategies to optimize monitoring schemes of recreational waters from Salta,Argentina: a multivariate approach

Several recreational surface waters in Salta, Argentina, were selected to assess their quality. Seventy percent of the measurements exceeded at least one of the limits established by international legislation becoming unsuitable for their use. To interpret results of complex data, multivariate techniques were applied. Arenales River, due to the variability observed in the data, was divided in two: upstream and downstream representing low and high pollution sites, respectively, and cluster analysis supported that differentiation. Arenales River downstream and Campo Alegre Reservoir were the most different environments, and Vaqueros and La Caldera rivers were the most similar. Canonical correlation analysis allowed exploration of correlations between physicochemical and microbiological variables except in both parts of Arenales River, and principal component analysis allowed finding relationships among the nine measured variables in all aquatic environments. Variable’s loadings showed that Arenales River downstream was impacted by industrial and domestic activities, Arenales River upstream was affected by agricultural activities, Campo Alegre Reservoir was disturbed by anthropogenic and ecological effects, and La Caldera and Vaqueros rivers were influenced by recreational activities. Discriminant analysis allowed identification of subgroup of variables responsible for seasonal and spatial variations. Enterococcus, dissolved oxygen, conductivity, E. coli, pH, and fecal coliforms are sufficient to spatially describe the quality of the aquatic environments. Regarding seasonal variations, dissolved oxygen, conductivity, fecal coliforms, and pH can be used to describe water quality during dry season, while dissolved oxygen, conductivity, total coliforms, E. coli, and Enterococcus during wet season. Thus, the use of multivariate techniques allowed optimizing monitoring tasks and minimizing costs involved.     

Product safety – Principles and practices in a life cycle perspective

This article describes a new product life cycle model that can be used by producers to improve safety and to prevent defective products from being placed on the market. The model has eight phases and the article describes and discusses the required safety-related issues in each phase. Analytical methods that should be used in the various phases are identified. Both consumer and industrial products are covered. The article outlines main product safety requirements with focus on European product safety legislation. The concept adequate safety is introduced as an acceptance criterion for the producer during the product development process, and factors that should be taken into account when deciding whether or not a product has adequate safety are discussed.     

Spectroscopic and wet chemical characterization of solid waste organic matter of different age in landfill sites, southern Germany

Landfill sites are potential sources of hazardous emissions by degradation and transformation processes of waste organic matter. Its chemical composition and microbial degradability are key factors for risk management, after-care, and estimation of potential emissions. The aim of the study is to provide information about composition and extent of transformation of waste organic matter in four landfill sites in Bavaria, Southern Germany by means of (13)C NMR spectroscopy, acid-hydrolyzable carbohydrates, chloroform-methanol extractable lipids, acid-hydrolyzable proteins, and lignin compounds after CuO oxidation. Ten samples of about 20 to 25 yr, 15 to 20 yr, and 5 to 10 yr of deposition each were taken at 2 m depth intervals by grab drilling till 10-m depth. Increasing temperatures from about 15 degrees C at 2-m depth to >40 degrees C at 10-m depth are found at some of the sites, representing optimum conditions for mesophile methane bacteria. Moisture contents of 160 to 310 g kg(-1) (oven dry), however, provide limiting conditions for anaerobic biodecay. Spectroscopic and chemical variables generally indicate a low extent of biodegradation and transformation at all sites despite a considerable heterogeneity of the samples. Independent of the time and depth of deposition more than 50% of the carbohydrate fraction of the waste organic matter provide a high potential for methane emissions and on-site energy production. There was no significant accumulation of long-chain organic and aromatic compounds, and of lignin degradation products even after more than 25 yr of rotting indicating higher extent of decomposition or stabilization of the waste organic matter. Installation of seepage water cleaning and recirculation systems are recommended to increase suboptimal moisture contents with respect to microbial methanogenesis, energy production, and long-term stabilization of municipal solid waste.     

Declining levels of PCB, HCB and p,p′-DDE in adipose tissue from food producing bovines and swine in Sweden 1991–2004

The official control programme for organochlorine (OC) contaminants in food producing animals in Sweden was used to study temporal and spatial trends of the polychlorinated biphenyl CB 153, hexachlorobenzene (HCB) and p,p′-DDE in adipose tissue from bovines and swine 1991–2004. Our results show that efforts to decrease OC contamination of animal feed and the environment have had a positive impact on the contamination of the animal production. OC concentrations declined significantly in almost all studied regions of Sweden. OC temporal trends were slower in bovines (6–8% per year) than in swine (10–12%). Power analyses showed that data from more than 10 years of sampling were needed for a detection of an annual OC level change of 5% in both species in the control programme, due to large within- and between-year variation in OC levels. CB 153 and p,p′-DDE levels were higher in southern than in northern Sweden. Levels decreased with age in milk cows, but not in young nulliparous cows (heifers) and bulls. Moreover, milk cows and bulls had significantly lower OC levels than heifers. Levels were not age-dependent among swine, but castrated male swine (barrows) had significantly lower OC levels than young female swine (gilts). Levels of the studied OCs are now in many cases below the LOQ of the analytical method used. Future time trend studies of these OCs thus depend on lowered LOQs in the control programme.     

超高效液相色谱/电喷雾串联质谱(UPLC/MS/MS)分析全氟代化合物(PFCs)

近年来,在全球范围内的环境和人体血液中检测到全氟代化合物(PFCs)增长的趋势,引起了研究者和有关当局的关注.PFCs同时具有亲水性和疏水性,经常用于地毯、纤维、皮革的处理、纸张和食品包装物等,也是塑料生产、灭火剂、抛光剂和杀虫剂的功能化学品.     

Bioconcentration of zinc and cadmium in ectomycorrhizal fungi and associated aspen trees as affected by level of pollution

Concentrations of Zn and Cd were measured in fruitbodies of ectomycorrhizal (ECM) fungi and leaves of co-occurring accumulator aspen. Samples were taken on three metal-polluted sites and one control site. Fungal bioconcentration factors (BCF = fruitbody concentration: soil concentration) were calculated on the basis of total metal concentrations in surface soil horizons (BCF_tot) and NH₄NO₃-extractable metal concentrations in mineral soil (BCF_lab). When plotted on log-log scale, values of BCF decreased linearly with increasing soil metal concentrations. BCF_lab for both Zn and Cd described the data more closely than BCF_tot. Fungal genera differed in ZnBCF but not in CdBCF. The information on differences between fungi with respect to their predominant occurrence in different soil horizons did not improve relations of BCF with soil metal concentrations. Aspen trees accumulated Zn and Cd to similar concentrations as the ECM fungi. Apparently, the fungi did not act as an effective barrier against aspen metal uptake by retaining the metals.     

Modeling of metal binding in tropical Fluvisols and Acrisols treated with biosolids and wastewater

There is growing concern about the accumulation of metals in tropical agricultural soils. In this study, experimental results from batch studies were used to test whether multi-surface geochemical models could describe metal binding in selected Vietnamese soils. The multi-surface models considered metal binding to iron hydroxides (using the diffuse layer model), organic matter (Stockholm Humic model and NICA-Donnan model), and phyllosilicate clay (Gaines-Thomas equation) as well as complexation to dissolved organic and inorganic ligands in the solution phase. We found that for total dissolved Cd, Cu and Zn the two multi-surface models being tested provided very good model fits for all soils, as evidenced by low root-mean square errors between model predictions and observations. These results suggest that organic matter is an important sorbent for many metals in these soils. However, poor fits were obtained for Cr(III), Mn and Pb for all soils. The study also suggests that the pH is the main factor that controls the solubility of metals in tropical Fluvisols and Acrisols subjected to application of biosolids and wastewater, and that advanced multi-surface models can be used to simulate the binding and release of many trace metals.     

Changes in the microbial communities during co-composting of digestates

Anaerobic digestion is a waste treatment method which is of increasing interest worldwide. At the end of the process, a digestate remains, which can gain added value by being composted. A study was conducted in order to investigate microbial community dynamics during the composting process of a mixture of anaerobic digestate (derived from the anaerobic digestion of municipal food waste), green wastes and a screened compost (green waste/kitchen waste compost), using the COMPOCHIP microarray. The composting process showed a typical temperature development, and the highest degradation rates occurred during the first 14 days of composting, as seen from the elevated CO₂ content in the exhaust air. With an exception of elevated nitrite and nitrate levels in the day 34 samples, physical–chemical parameters for all compost samples collected during the 63 day process indicated typical composting conditions. The microbial communities changed over the 63 days of composting. According to principal component analysis of the COMPOCHIP microarray results, compost samples from the start of the experiment were found to cluster most closely with the digestate and screened compost samples. The green waste samples were found to group separately. All starting materials investigated were found to yield fewer and lower signals when compared to the samples collected during the composting experiment.     

Occurrence and levels of organochlorine compounds in human breast milk in Bangladesh

In low-income countries, the use of some organochlorine pesticides is still common in order to increase food production. Monitoring the chemical exposure is an important step in risk-reducing strategies. This is the first study to report concentrations of organochlorines in breast milk of women from Bangladesh where farming is the main income source.Organochlorines such as p,p′-DDT, o,p′-DDT, p,p′-DDE, p,p′-DDD (i.e., ∑DDT), HCB, α-, β- and γ-HCH, trans-chlordane, cis-chlordane, oxy-chlordane, trans-nonachlor, cis-nonachlor, mirex and polychlorinated biphenyls (CB 28, 52, 99, 101, 105, 114, 118, 123, 128, 138, 141, 149, 153, 156, 157, 163, 167, 170, 180, 183, 187, 189, 194) were analyzed in breast milk collected in 2002 from 72 first-time mothers (median age 20 years) living in the rural area Matlab, Bangladesh.While the concentrations of PCBs and many of the pesticides were low, the concentrations of p,p′-DDT and its metabolite p,p′-DDE were high (median 349 and 1645 ng g⁻¹ lipid, respectively) in comparison to other countries. The median value of ∑DDT was 2123 ng g⁻¹ lipid. The estimated daily exposure to p,p′-DDT, p,p′-DDE and ∑DDTs was 10, 30 and 42 μg kg⁻¹ body weight, respectively, in 3 months old infants. The p,p′-DDE/p,p′-DDT ratio ranged from 1 to 23, where 58% of the mothers had a ratio below 5 indicating recent or ongoing DDT exposure.This study reports infant exposure and maternal body burden of organochlorines through breast milk. Although the findings give no reason to limit breast-feeding, it is essential to identify the main exposure sources and find means to decrease the exposure.