Occurrence and levels of organochlorine compounds in human breast milk in Bangladesh

In low-income countries, the use of some organochlorine pesticides is still common in order to increase food production. Monitoring the chemical exposure is an important step in risk-reducing strategies. This is the first study to report concentrations of organochlorines in breast milk of women from Bangladesh where farming is the main income source.Organochlorines such as p,p′-DDT, o,p′-DDT, p,p′-DDE, p,p′-DDD (i.e., ∑DDT), HCB, α-, β- and γ-HCH, trans-chlordane, cis-chlordane, oxy-chlordane, trans-nonachlor, cis-nonachlor, mirex and polychlorinated biphenyls (CB 28, 52, 99, 101, 105, 114, 118, 123, 128, 138, 141, 149, 153, 156, 157, 163, 167, 170, 180, 183, 187, 189, 194) were analyzed in breast milk collected in 2002 from 72 first-time mothers (median age 20 years) living in the rural area Matlab, Bangladesh.While the concentrations of PCBs and many of the pesticides were low, the concentrations of p,p′-DDT and its metabolite p,p′-DDE were high (median 349 and 1645 ng g⁻¹ lipid, respectively) in comparison to other countries. The median value of ∑DDT was 2123 ng g⁻¹ lipid. The estimated daily exposure to p,p′-DDT, p,p′-DDE and ∑DDTs was 10, 30 and 42 μg kg⁻¹ body weight, respectively, in 3 months old infants. The p,p′-DDE/p,p′-DDT ratio ranged from 1 to 23, where 58% of the mothers had a ratio below 5 indicating recent or ongoing DDT exposure.This study reports infant exposure and maternal body burden of organochlorines through breast milk. Although the findings give no reason to limit breast-feeding, it is essential to identify the main exposure sources and find means to decrease the exposure.     

Selenium speciation and localization in chironomids from lakes receiving treated metal mine effluent

A lake system in northern Saskatchewan receiving treated metal mine and mill effluent contains elevated levels of selenium (Se). An important step in the trophic transfer of Se is the bioaccumulation of Se by benthic invertebrates, especially primary consumers serving as a food source for higher trophic level organisms. Chironomids, ubiquitous components of many northern aquatic ecosystems, were sampled at lakes downstream of the milling operation and were found to contain Se concentrations ranging from 7 to 80 mg kg⁻¹ dry weight. For comparison, laboratory-reared Chironomus dilutus were exposed to waterborne selenate, selenite, or seleno-DL-methionine under laboratory conditions at the average total Se concentrations found in lakes near the operation. Similarities in Se localization and speciation in laboratory and field chironomids were observed using synchrotron-based X-ray fluorescence (XRF) imaging and X-ray absorption spectroscopy (XAS). Selenium localized primarily in the head capsule, brain, salivary glands and gut lining, with organic Se species modeled as selenocystine and selenomethionine being the most abundant. Similarities between field chironomids and C. dilutus exposed in the laboratory to waterborne selenomethionine suggest that selenomethionine-like species are most readily accumulated, whether from diet or water.     

Changes in the microbial communities during co-composting of digestates

Anaerobic digestion is a waste treatment method which is of increasing interest worldwide. At the end of the process, a digestate remains, which can gain added value by being composted. A study was conducted in order to investigate microbial community dynamics during the composting process of a mixture of anaerobic digestate (derived from the anaerobic digestion of municipal food waste), green wastes and a screened compost (green waste/kitchen waste compost), using the COMPOCHIP microarray. The composting process showed a typical temperature development, and the highest degradation rates occurred during the first 14 days of composting, as seen from the elevated CO₂ content in the exhaust air. With an exception of elevated nitrite and nitrate levels in the day 34 samples, physical–chemical parameters for all compost samples collected during the 63 day process indicated typical composting conditions. The microbial communities changed over the 63 days of composting. According to principal component analysis of the COMPOCHIP microarray results, compost samples from the start of the experiment were found to cluster most closely with the digestate and screened compost samples. The green waste samples were found to group separately. All starting materials investigated were found to yield fewer and lower signals when compared to the samples collected during the composting experiment.     

超高效液相色谱/电喷雾串联质谱(UPLC/MS/MS)分析全氟代化合物(PFCs)

近年来,在全球范围内的环境和人体血液中检测到全氟代化合物(PFCs)增长的趋势,引起了研究者和有关当局的关注.PFCs同时具有亲水性和疏水性,经常用于地毯、纤维、皮革的处理、纸张和食品包装物等,也是塑料生产、灭火剂、抛光剂和杀虫剂的功能化学品.     

Modeling of metal binding in tropical Fluvisols and Acrisols treated with biosolids and wastewater

There is growing concern about the accumulation of metals in tropical agricultural soils. In this study, experimental results from batch studies were used to test whether multi-surface geochemical models could describe metal binding in selected Vietnamese soils. The multi-surface models considered metal binding to iron hydroxides (using the diffuse layer model), organic matter (Stockholm Humic model and NICA-Donnan model), and phyllosilicate clay (Gaines-Thomas equation) as well as complexation to dissolved organic and inorganic ligands in the solution phase. We found that for total dissolved Cd, Cu and Zn the two multi-surface models being tested provided very good model fits for all soils, as evidenced by low root-mean square errors between model predictions and observations. These results suggest that organic matter is an important sorbent for many metals in these soils. However, poor fits were obtained for Cr(III), Mn and Pb for all soils. The study also suggests that the pH is the main factor that controls the solubility of metals in tropical Fluvisols and Acrisols subjected to application of biosolids and wastewater, and that advanced multi-surface models can be used to simulate the binding and release of many trace metals.     

Enabling youth to advocate for workplace safety

Work-related injury rates for Canadian youth (ages 15–24) are alarmingly high compared to adult workers even though youth are less likely to be performing hazardous jobs. This paper reports on a document analysis of youth workplace safety education initiatives sponsored by national and provincial/territorial governmental and non-governmental agencies. Web-based documents were analyzed through the theoretical lens of self-advocacy. The self-advocacy framework highlights how youth can be agentic in altering high-risk workplaces by publicly articulating their own interests, needs, and rights (Test et al., 2005); thus, self-advocacy is a critical component in studying educational programs for youth safety. The analysis revealed that instruction on workplace safety identifies safety issues to workers and tells youth to work safely but does little to promote self-advocacy in young workers.     

A rapid lateral flow immunoassay for the detection of fungal alpha-amylase at the workplace

Fungal alpha-amylase is a flour supplement which is added to improve the quality of bakery products. Various studies have shown that exposure to this enzyme is an important risk factor for the development of bakers' allergy and this allergy is reported to be one of the most frequent causes of occupational asthma. A rapid assay was developed to monitor exposure to occupational allergens directly at the workplace. The sensitivity of the developed assay is 0.32 ng amylase mL(-1) in a buffer system with the commercially available alpha-amylase preparation Fungamyl 1600S as the standard. Initial validation tests (n = 33) were performed with airborne and settled dust from an industrial bakery. The new lateral flow immunoassay detected amylase in 22 of the 26 samples regarded as positive in an enzyme immunoassay, and was negative for all seven enzyme immunoassay-negative samples, while the four lateral flow immunoassay-negative/enzyme immunoassay-positive samples all had levels below 2 ng mL(-1). The sensitivity of 2 ng mL(-1) of the amylase lateral flow immunoassay is sufficient for first screening purposes and, therefore, this simple and rapid assay may allow direct on-site demonstration of work-related hazards of bio-allergen exposure. This would be particularly useful in occupational hygiene practice, especially in traditional or small-scale bakeries which lack the technological skills for testing the exposure to respiratory allergens.     

Sub-lethal hydrops as a manifestation of dehydrated hereditary stomatocytosis in two consecutive pregnancies

Dehydrated hereditary stomatocytosis (DHS) is a rare congenital hemolytic anemia mapping to 16q23–q24. We showed recently that it is part of a pleiotropic syndrome likely to display pseudohyperkalemia and/or different forms of fetal and placental fluid collections. Here, we report a woman with DHS. She had two consecutive pregnancies associated with severe fetal hydrops. Hydrops would probably have been lethal in the absence of appropriate removal of ascites and excess amniotic fluid. In utero exchange transfusion, performed once, was useless, because anemia was not pronounced enough to be the cause of the hydrops. In both newborns, ascites resolved within a week following birth and never recurred. The association of hydrops and hemolytic anemia suggests the possibility of DHS. Symptomatic treatment of the hydrops assists survival until spontaneous resorption occurs. Copyright © 2003 John Wiley & Sons, Ltd.     

A method for measuring the potential dermal exposure to methyl methacrylate during two different dental technical work tasks

Dental technicians are exposed on a daily basis to undiluted methyl methacrylate (MMA) when performing various routine tasks. Although the clinical effects of this chemical have been known for decades, no previous studies have been performed to estimate the potential dermal exposure to it. In this study we describe a patch-sampling technique to intercept the MMA that would otherwise have contaminated the skin on different parts of the hand and lower arm. Two different work tasks, making an orthodontic splint and denture preparation, were both performed under simulated workplace conditions twice by two recent graduated dental technicians. Air measurements were collected simultaneously. The results indicate that the exposure patterns associated with producing an orthodontic splint and denture preparation differed. We found work task-dependent differences in the amounts of MMA collected at the different parts of each hand, and differences between the right and left hands. There was also an interaction between hand and work task, especially for the right hand. The air measurements were positively correlated with the dermal exposure. This study highlights the importance of using a measurement strategy that takes the variability within the hand/arm body parts into account when measuring potential exposure during these kinds of work tasks. In order to establish future dermal exposure limits, more workplace and experimental studies are required.