Comparison of batch, stirred flow chamber, and column experiments to study adsorption, desorption and transport of carbofuran within two acidic soils

Different methods (batch, column and stirred flow chamber experiments) used for adsorption and desorption of carbofuran studies were compared. All tested methods showed that the carbofuran adsorption was higher in the soil with the higher organic matter content, whereas the opposite behaviour was observed for the percentage of carbofuran desorbed. However, different methods have revealed some discrepancies in carbofuran adsorption/desorption kinetics. Although batch method showed interesting data on equilibrium experiments, such as a low heterogeneity for the carbofuran adsorption sites independent of soil organic matter content, it had some disadvantages for carbofuran adsorption/desorption kinetic studies. The disadvantages were related with the excessive limitations of this method on kinetics, i.e., no difference could be detected between different soils. However, with column and stirred flow chamber methods the carbofuran adsorption/desorption kinetics of different soils could be compared. Moreover, the absolute values of carbofuran adsorption/desorption and its rate were higher in the stirred flow chamber than in the batch and column experiments. Using stirred flow chamber experiments the carbofuran desorption was significantly faster than its adsorption, whereas carbofuran using column experiments they were similar. These discrepancies should be considered when the results obtained only with one method is discussed.     

Solar photocatalytic treatment of landfill leachate using a solid mineral by-product as a catalyst

The treatment of municipal solid waste landfill leachate in a pilot plant made up of solar compound parabolic collectors, using a solid industrial titanium by-product (WTiO₂) containing TiO₂ and Fe(III) as a photocatalyst, was investigated. In the study evidence was found showing that the degradation performed with WTiO₂ was mainly due to the Fe provided by this by-product, instead of TiO₂. However, although TiO₂ had very little effect by itself, a synergistic effect was observed between Fe and TiO₂. The application of WTiO₂, which produced coupled photo-Fenton and heterogeneous catalysis reactions, achieved a surprisingly high depuration level (86% of COD removal), higher than that reached by photo-Fenton using commercial FeSO₄ (43%) in the same conditions. After the oxidation process the biodegradability and toxicity of the landfill leachate were studied. The results showed that the leachate biodegradability was substantially increased, at least in the first stages of the process, and again that WTiO₂ was more efficient than FeSO₄ in terms of increasing biodegradability.     

Influence of support material on the immobilization of biomass for the degradation of linear alkylbenzene sulfonate in anaerobic reactors

Two horizontal-flow anaerobic immobilized biomass reactors (HAIB) were used to study the degradation of the LAS surfactant: one filled with charcoal (HAIB1) and the other with a mixed bed of expanded clay and polyurethane foam (HAIB2). The reactors were fed with synthetic substrate supplemented with 14 mg l(-1)of LAS, kept at 30+/-2 degrees C and operated with a hydraulic retention time (HRT) of 12h. The surfactant was quantified by HPLC. Spatial variation analyses were done to quantify organic matter and LAS consumption along the reactor length. The presence of the surfactant in the load did not affect the removal of organic matter (COD), which was close to 90% in both reactors for an influent COD of 550 mg l(-1). The results of a mass balance indicated that 28% of all LAS added to HAIB1 was removed by degradation. HAIB2 presented 27% degradation. Molecular biology techniques revealed microorganisms belonging the uncultured Holophaga sp., uncultured delta Proteobacterium, uncultured Verrucomicrobium sp., Bacteroides sp. and uncultured gamma Proteobacterium sp. The reactor with biomass immobilized on charcoal presented lower adsorption and a higher kinetic degradation coefficient. So, it was the most suitable support for LAS anaerobic treatment.     

Bioreactor treatment of municipal solid waste landfill leachates: characterization of organic fractions

Quantitative and qualitative changes in organic matter were studied at different stages of treatment in a bioreactor designed to process leachates from a municipal solid waste landfill. The particulate matter (PM) and macromolecular fractions of the dissolved organic matter with solubility properties comparable to humic (acid-insoluble) and fulvic (acid-soluble) acid fractions (AI, AS, respectively) from the incoming black liquid, the bioreactor content, and the final processed effluent were isolated, quantified, and characterized by visible and infrared (IR) spectroscopies. The macromolecular signature either aliphatic (glycopeptides, carbohydrates) or aromatic (coinciding with infrared patterns of lignin, tannins etc.) enabled us to characterize the different organic fractions during the course of microbial transformation. The results reveal significant changes in the nitrogen speciation patterns within the different organic fractions isolated from the wastewater. The final increase in the relative proportions of nitrogen in the least aromatic AS fraction during microbial transformation could be related to protein formation inside the bioreactor. After biological treatment and ultrafiltration, the amount of organic matter was reduced by approximately 70%, whereas aromaticity increased in all fractions, indicating preferential elimination of aliphatic wastewater compounds. Most of the remaining fractions at the end of the process consisted of a yellow residue rich in low molecular weight AS fractions.     

Copper, zinc and lead speciation in salt marsh sediments colonised by Halimione portulacoides and Spartina maritima

Total concentrations and fractionation of Cu, Zn and Pb in seven operationally defined phases (exchangeable, carbonates, manganese oxides, organic complexes, amorphous iron oxides, crystalline iron oxides and residual) were determined in sediments colonised by the halophyte species Halimione portulacoides and Spartina maritima in a Tagus estuary salt marsh (Portugal). We aimed to determine whether the speciation of these metals was different in areas colonised by each halophyte. Higher concentrations of Cu, Zn and, in particular Pb, were found in the rhizosphere of S. maritima than in the root sediments of H. portulacoides. Geochemical fractionation of Cu, Zn and Pb in sediments of the salt marsh depended upon the metal, and for Zn and Pb clearly varied with depth and with the colonising species. The higher redox potential observed in sediments colonised by H. portulacoides may in part explain the observed differences in the speciation of Cu, Zn and Pb.     

Spatial relationships between nitrogen status and pitch canker disease in slash pine planted adjacent to a poultry operation

Pitch canker disease (Fusarium circinatum Nirenberg & O'Donnell) causes serious shoot dieback, reduced growth and mortality in pines found in the southern and western USA, and has been linked to nutrient imbalances. Poultry houses with forced-air ventilation systems produce nitrogen (N) emissions. This study analyzed spatial correlations between pitch canker disease and foliar, forest floor, soil, and throughfall N in a slash pine (Pinus elliottii var. elliottii Engelm.) plantation adjacent to a poultry operation in north Florida, USA. Tissue and throughfall N concentrations were highest near the poultry houses and remained elevated for 400 m. Disease incidence ranged from 57-71% near the poultry houses and was spatially correlated with N levels. Similarly, stem mortality ranged from 41-53% in the most heavily impacted area, and declined to 0-9% at distances greater than 400 m. These results suggest that nutritional processes exacerbate changes in disease susceptibility and expression in slash pine.     

Correction to: The time of concentration application in studies around the world: a review

Environmental Science and Pollution Research -     

Conserving alpha and beta diversity in wood-production landscapes

International demand for wood and other forest products continues to grow rapidly, and uncertainties remain about how animal communities will respond to intensifying resource extraction associated with woody bioenergy production. We examined changes in alpha and beta diversity of bats, bees, birds, and reptiles across wood production landscapes in the southeastern United States, a biodiversity hotspot that is one of the principal sources of woody biomass globally. We sampled across a spatial gradient of paired forest land-uses (representing pre and postharvest) that allowed us to evaluate biological community changes resulting from several types of biomass harvest. Short-rotation practices and residue removal following clearcuts were associated with reduced alpha diversity (−14.1 and −13.9 species, respectively) and lower beta diversity (i.e., Jaccard dissimilarity) between land-use pairs (0.46 and 0.50, respectively), whereas midrotation thinning increased alpha (+3.5 species) and beta diversity (0.59). Over the course of a stand rotation in a single location, biomass harvesting generally led to less biodiversity. Cross-taxa responses to resource extraction were poorly predicted by alpha diversity: correlations in responses between taxonomic groups were highly variable (−0.2 to 0.4) with large uncertainties. In contrast, beta diversity patterns were highly consistent and predictable across taxa, where correlations in responses between taxonomic groups were all positive (0.05–0.4) with more narrow uncertainties. Beta diversity may, therefore, be a more reliable and information-rich indicator than alpha diversity in understanding animal community response to landscape change. Patterns in beta diversity were primarily driven by turnover instead of species loss or gain, indicating that wood extraction generates habitats that support different biological communities.