磁性铁基改性生物炭去除水中氨氮

氨氮的过度排放是水体富营养化的一个重要原因.然而,随着环境法规的日益严格,传统方法处理效果难以达到要求.吸附法因高效、安全等优点近年来开始应用于去除水中的氨氮.本研究中以共沉淀法将磁性铁基材料负载到市政污泥生物炭上,结果表明其对水中氨氮有良好的去除效果.80℃下合成的材料（MB₈₀）在293 K下对氨氮的饱和吸附量可达17.52 mg·g^-1.动力学与热力学结果表明,MB₈₀吸附氨氮的过程更符合伪二级动力学和Langmuir等温线.MB₈₀对氨氮的吸附机制可归纳为静电吸引、孔隙填充、离子交换和氢键结合.且5次循环后对氨氮的吸附量仍十分理想,可达3.18 mg·g^-1.本研究的结果可以为高效去除水中氨氮提供一种行之有效的方法,并为市政污泥的处理提供新的出路.     

纹缟虾虎鱼对Cu~(2+)、Cd~(2+)和氨氮的毒性响应和敏感性分析

以纹缟虾虎鱼为受试生物,分别进行了Cu~(2+)、Cd~(2+)和氨氮为环境因子的急性毒性实验和氨氮慢性暴露实验,结合文献数据分析纹缟虾虎鱼对3种污染物的敏感性。结果表明,Cu~(2+)、Cd~(2+)和氨氮对纹缟虾虎鱼的EC50分别为4.527、40.408和63.182mg·L~(-1)。组织切片结果显示,氨氮暴露能够引起纹缟虾虎鱼肝组织结构退化,组织细胞畸变,其损伤程度随着氨氮浓度的升高而加剧。氨氮暴露对肠管未见明显影响。敏感性分析结果表明,纹缟虾虎鱼对Cu~(2+)、Cd~(2+)和氨氮的累积概率分别为83.33%、96.27%和90.48%,均表现为不敏感。在Cu~(2+)、Cd~(2+)和氨氮对海洋生物的敏感性排名中,纹缟虾虎鱼分别在第31/35、32/32和19/20位。在8~12种海洋鱼类中,纹缟虾虎鱼对上述3种污染物的敏感性都处在较低水平。     

Optimizing synthesis conditions of nanoscale zero-valent iron (nZVI) through aqueous reactivity assessment

Nanoscale iron particles (nZVI) is one of the most important engineered nanomaterials applied to environmental pollution control and abatement. Although a multitude of synthesis approaches have been proposed, a facile method to screen the reactivity of candidate nZVI materials produced using different methods or under varying synthesis conditions has yet been established. In this study, four reaction parameters were adjusted in the preparation of borohydride-reduced nZVI. The reductive properties of the resultant nanoparticles were assayed independently using two model aqueous contaminants, Cu(II) and nitrate. The results confirm that the reductive reactivity of nZVI is most sensitive to the initial concentration of iron precursor, borohydride feed rate, and the loading ratio of borohydride to ferric ion during particle synthesis. Solution mixing speed, in contrast, carries a relative small weight on the reactivity of nZVI. The two probing reactions (i.e., Cu(II) and nitrate reduction) are able to generate consistent and quantitative inference about the mass-normalized surface activity of nZVI. However, the nitrate assay is valid in dilute aqueous solutions only (50 mg·L⁻¹ or lower) due to accelerated deactivation of iron surface at elevated nitrate concentrations. Additional insights including the structural and chemical makeup of nZVI can be garnered from Cu(II) reduction assessments. The reactivity assays investigated in this study can facilitate screening of candidate materials or optimization of nZVI production parameters, which complement some of the more sophisticated but less chemically specific material characterization methods used in the nZVI research.     

Numerical modelling of horizontal sediment-laden jets

Sediment-laden turbulent flows are commonly encountered in natural and engineered environments. It is well known that turbulence generates fluctuations to the particle motion, resulting in modulation of the particle settling velocity. A novel stochastic particle tracking model is developed to predict the particle settling out and deposition from a sediment-laden jet. Particle velocity fluctuations in the jet flow are modelled from a Lagrangian velocity autocorrelation function that incorporates the physical mechanism leading to a reduction of settling velocity. The model is first applied to study the settling velocity modulation in a homogeneous turbulence field. Consistent with basic experiments using grid-generated turbulence and computational fluid dynamics (CFD) calculations, the model predicts that the apparent settling velocity can be reduced by as much as 30 % of the stillwater settling velocity. Using analytical solution for the jet mean flow and semi-empirical RMS turbulent velocity fluctuation and dissipation rate profiles derived from CFD predictions, model predictions of the sediment deposition and cross-sectional concentration profiles of horizontal sediment-laden jets are in excellent agreement with data. Unlike CFD calculations of sediment fall out and deposition from a jet flow, the present method does not require any a priori adjustment of particle settling velocity.     

Indigo carmine removal by charcoal from rice bran as an agricultural by-product

On the utilization of agricultural by-product, charcoal from rice bran was produced. The adsorption characteristics of indigo carmine onto charcoals from rice bran were investigated by the batch method. The yield and surface area of charcoal were decreased and increased with increase of carbonization temperature, respectively. The removal ratio of indigo carmine was high with the charcoal carbonized at higher temperature. In the relationship between the amount of indigo carmine adsorbed and the square root of elapsed time, a good linearity was recognized. The kinetic constant of adsorption removal for indigo carmine was rapid in the charcoal carbonized at higher temperature. The adsorption characteristics for indigo carmine removal by charcoal from rice bran were dominated by the value of their surface area.     

Determination of three endocrine disrupting chemicals,triclosan, 4-n-nonylphenol,and di-n-butyl phthalate using stir bar sorptive extraction in samples of different matrices

Three endocrine disrupting chemicals (EDCs), triclosan (TCS), 4-n-nonylphenol (4-n-NP), and di-n-butyl phthalate (DBP) were determined using stir bar sorptive extraction (SBSE) along with high-performance liquid chromatography/photodiode array detection (HPLC/DAD). Benzyl butyl phthalate was used as an internal standard. The targeted analytes could be rapidly determined with limits of quantification (LOQ) ranging from 4.1 (DBP), 10 (TCS), to 34 (4-n-NP)?µg?L^?1 in real samples such as bottled waters, personal care products, soaps, lotions, and urine. The results show that the developed analytical scheme is solvent-saving, efficient, and capable of fast screening samples for these common EDCs.     

Correlation between lead and iron in children's blood in Jordan

A total of 200 Jordanian children were classified into two groups: 100 Fe replete and 100 Fe deficient with ages ranging between 3.0 and 12.0 years (6.9 ± 2.7 years). All participants were chosen according to proper selection criteria followed by the sample collection: the samples were analyzed for hemoglobin and red blood cells; ferritin, an immunoassays-based instrument; and levels of Pb, Cu, and Zn. There were no significant differences between genders regarding Fe-deficiency (p = 0.57 and χ2 = 0.33), with a significant association of younger individuals (3.0–9.1 years) with Fe-deficiency (p < 0.05 and χ2 = 22.7).

In addition, there is a significant positive correlation between Fe-deficiency with blood levels of Pb, Cu, and Zn (p < 0.05), (r = 0.43, 0.35, and 0.42, respectively) as compared to control group, this findings supported, by comparing the levels of the examined metals in both groups, in individuals whom close to heavy metals source (highway traffic or oil gas station), and found that the mean of the heavy metals level in close Fe-deficient group higher than in close Fe-replete group.     

Detection and quantitation of trace levels of low molecular weight halocarbons (LMHs) associated with commercial sodium humate

Examination of vapor above commercial sodium humate and above 10wt% aqueous humate solution by gas chromatography (GC) revealed the presence of chloroform and trichloroethylene. Further examination of the aqueous humate by the purge and trap procedure confirmed the association of chloroform and trichloroethylene with the humate. GC/mass spectrometry analyses of methylene chloride extract of the humate established the association of LMHs with the humate. Improved headspace capillary GC technique showed that the humate contained not only chloroform, trichloroethylene but several other LMHs in the range 190 to 4000ng·kg^‐1.     

Rapid liquid chromatographic analysis of Metoclopramide in pharmaceutical preparations

A sensitive, accurate and reproducible method for the analysis of metoclopramide, a gastrointestinal drug, has been described. An isocratic HPLC elution method was employed which requires about 10 minutes to be performed. The concentration of metoclopramide hydrochloride preparations was found to be 95.1 ±0.3% and 94.21 ±0.25% in tablet and injection formulations, respectively.     

A model for approving and controlling sea water pollution for recreational activity

A model for assessing approval of a beach for recreational water activity was proposed. The model is based upon a sanitary survey together with intensive microbiological monitoring three times a day, five times a week for a month. In highly populated areas, continuous surveys once a day, five days a week are needed in order to assure the cleanliness and safety of these beaches.

Due to our intensive monitoring system, we can assure that Tel‐Aviv has one of the cleanest beaches near a metropolitan area in the Mediterranean Sea.