Effect of iron speciation on the photodegradation of Monuron in combined photocatalytic systems with immobilized or suspended TiO2

Photodegradation kinetics of Monuron (3-(4-chlorophenyl)-1,1-dimethylurea) in photoreactor with immobilized and suspended TiO₂ photocatalyst were studied. The effect of addition of ferric or ferrous perchlorate was investigated. Whatever the concentration of Fe(III/II) added there is no significant negative effect on the photodegradation rate of pollutants. On the contrary, depending on speciation and concentration of iron salts, slight or marked acceleration of the photodegradation kinetics was observed. This positive influence was more pronounced in the case of TiO₂ suspensions than for TiO₂ layers. Fe(III) was generally more effective than Fe(II).     

Palatability mapping: a koala's eye view of spatial variation in habitat quality

Ecologists trying to understand the value of habitat to animals must first describe the value of resources contained in the habitat to animals and, second, they must describe spatial variation in resource quality at a resolution relevant to individual animal foraging. We addressed these issues in a study of koalas (Phascolarctos cinereus) in a Eucalyptus woodland. We measured beneficial and deterrent chemical characteristics as well as the palatability of trees using a near-infrared spectroscopic model based on direct feeding experiments. Tree use by koalas was influenced by tree size and foliar quality but was also context-dependent: trees were more likely to be visited if they were surrounded by small, unpalatable trees or by large, palatable trees. Spatial autocorrelation analysis and several mapping approaches demonstrated that foliar quality is spatially structured in the woodland at a scale relevant to foraging decisions by koalas and that the spatial structure is an important component of habitat quality.     

Spatially mixed crops to control the stratified dispersal of airborne fungal diseases

Intraspecific crop diversification is thought to be a possible solution to the disease susceptibility of monocultured crops. We modelled the stratified dispersal of an airborne pathogen population in order to identify the spatial patterns of cultivar mixtures that could slow epidemic spread driven by dual dispersal mechanisms acting over both short and long distances. We developed a model to simulate the propagation of a fungal disease in a 2D field, including a reaction-diffusion model for short-distance disease dispersal, and a stochastic model for long-distance dispersal. The model was fitted to data for the spatio-temporal spread of faba bean rust (caused by Uromyces viciae-fabae) through a discontinuous field. The model was used to compare the effectiveness of eight different planting patterns of cultivar mixtures against a disease spread by short-distance and stratified dispersal. Our combined modelling approach provides a reasonably good fit with the observed data for the spread of faba bean rust. Similar predictive power could be expected for the management of resource-mediated invasions by other airborne fungi. If a disease spreads by short-distance dispersal, random mixtures can be used to slow the epidemic spread, since their spatial irregularity creates a natural barrier to the progression of a smooth epidemic wave. In the context of stratified dispersal, heterogeneous patterns should be used that include a minimum distance between susceptible units, which decreases the probability of infection by long-distance spore dispersal. We provide a simple framework for modelling the stratified dispersal of disease in a diversified crop. The model suggests that the spatial arrangement of components in cultivar mixtures has to accord with the dispersal characteristics of the pathogen in order to increase the efficiency of diversification strategies in agro-ecosystems and forestry. It can be applied in low input agriculture to manage pathogen invasion by intercropping and cultivar mixtures, and to design sustainable systems of land use.     

Two-phase SPH modelling of advective diffusion processes

This paper deals with a two-dimensional numerical model based on the smoothed particle hydrodynamics (SPH) technique for the evaluation of the concentration field of pollutants in water. A SPH model is formulated to solve the fickian diffusion equation applied to pollutants with the same density as the water. A lagrangian SPH formalism of the advective diffusion equation is also developed for pollutant-water, taking into account the effects of molecular diffusion and natural advection induced by differences between the fluid densities. These equations are coupled with the fluid mechanics equations. Attention is paid to the numerical aspects involved in the solution procedure and to the optimization of the model parameters. Environmental engineering problems concerning diffusion and natural advection phenomena occur in the presence of a pollutant in still water. Numerical tests referring to a strip and a bubble of contaminant in a water tank with different initial concentration laws have been carried out. The results obtained by the proposed SPH models are compared with other available SPH formulations, showing an overall better agreement with standard analytical solutions in terms of spatial evolution of the concentration values. Capabilities and limits of the proposed SPH models to simulate advective diffusion phenomena for a wide range of density ratios are discussed.     

Heavy metal bioaccumulation by wild edible saprophytic and ectomycorrhizal mushrooms

Heavy metals cause serious problems in the environment, and they can be accumulated in organisms, especially in the higher fungi. The concentration of Ni, Cr, Pb, Cd, and Hg in 10 species of edible mushrooms in Medvednica Nature Park, Croatia was therefore determined. In addition, the similarity between the studied species was determined by cluster analysis based on concentrations of the aforementioned metals in the fruiting bodies. The contents of nickel, chromium, lead, cadmium, and mercury in the fruiting bodies of mushrooms were obtained by X-ray fluorescence spectrometry. The highest concentrations of Ni (3.62 mg kg^?1), Cr (3.01 mg kg^?1), and Cd (2.67 mg kg^?1) were determined in Agaricus campestris. The highest concentration of Pb (1.67 mg kg^?1) was determined in Macrolepiota procera, and the highest concentration of Hg (2.39 mg kg^?1) was determined in Boletus edulis. The concentration of all heavy metals significantly differed (p?<?0.001) between examined saprophytic and ectomycorrhizal mushrooms. Considering anatomical part of the fruiting body (cap-stipe), a considerably higher concentration of the analyzed elements was found in the cap for all mushroom species. According to calculated bioconcentration factors, all the examined species were found to be bioexclusors of Ni, Cr, and Pb and bioaccumulators of Cd and Hg. Cluster analysis performed on the basis of the accumulation of the studied metals revealed great phenotypic similarity of mushroom species belonging to the same genus and partial similarity of species of the same ecological affiliation.

     

Formetanate toxicity and changes in antioxidant enzyme system of <Emphasis Type="Italic">Apis mellifera</Emphasis> larvae

Substantial percentage of world food production depends on pollinating service of honeybees that directly depends on their health status. Among other factors, the success of bee colonies depends on health of developed larvae. The crucial phase of larval development is the first 6 days after hatching when a worker larva grows exponentially and larvae are potentially exposed to xenobiotics via diet. In the present study, we determined the lethal concentration LC₅₀ (72 h) following single dietary exposure of honeybee larvae to formetanate under laboratory conditions, being also the first report available in scientific literature. Activities of antioxidant enzymes, superoxide dismutase (SOD), catalase (CAT) and glutathione-S-transferase (GST) were also measured in the homogenates of in vitro reared honeybee larvae after single formetanate exposure. Decreased specific activity of SOD and increased activities of CAT and GST suggest the induction of oxidative stress. Higher levels of thiobarbituric reactive species in all samples supported this fact. Comparing determined larval toxicity (LC₅₀ of 206.01 mg a.i./kg diet) with adult toxicity data, we can suppose that the larvae may be less sensitive to formetanate than the adult bees.     

Can pine needles indicate trends in the air pollution levels at remote sites?

Data from ten years of integrated monitoring were used here to evaluate whether pine needles are a feasible tool for an assessment of long-term trends of the atmospheric contamination. Pine needles collected once a year were compared to high volume air samples collected for 24 h, every 7 days, and passive air samples integrated over 28-day periods. Results showed the same concentration patterns of polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) captured in needles and high volume samples. Passive air samplers were less efficient in sampling the particle-bound compounds. Theoretical air volume equivalent to each needle sample (V_EQ) was calculated as a ratio of the needle concentration over the mean air concentration. Results indicated different equivalent volumes for PAHs and organochlorines, possibly due to the faster degradation rates of PAHs in needles. The most important finding is that in the long term a needle monitoring gives very similar information on temporal trends of the atmospheric pollution as does a high volume air monitoring.     

Aerospace wetland monitoring by hyperspectral imaging sensors: a case study in the coastal zone of San Rossore Natural Park

The San Rossore Natural Park, located on the Tuscany (Italy) coast, has been utilized over the last 10 years for many remote sensing campaigns devoted to coastal zone monitoring. A wet area is located in the south-west part of the Natural Park and it is characterized by a system of ponds and dunes formed by sediment deposition occurring at the Arno River estuary. The considerable amount of collected data has permitted us to investigate the evolution of wetland spreading and land coverage as well as to retrieve relevant biogeochemical parameters, e.g. green biomass, from remote sensing images and products. This analysis has proved that the monitoring of coastal wetlands, characterized by shallow waters, moor and dunes, demands dedicated aerospace sensors with high spatial and spectral resolution. The outcomes of the processing of images gathered during several remote sensing campaigns by airborne and spaceborne hyperspectral sensors are presented and discussed. A particular effort has been devoted to sensor response calibration and data validation due to the complex heterogeneity of the observed natural surfaces.     

Novel approach to monitoring of the soil biological quality

In this study, a new approach to interpretation of results of the simple microbial biomass and respiration measurements in the soil microbiology is proposed. The principle is based on eight basal and derived microbial parameters, which are standardized and then plotted into sunray plots. The output is visual presentation of one plot for each soil, which makes possible the relative comparison and evaluation of soils in the monitored set. Problems of soil microbiology, such as the lack of benchmarking and reference values, can be avoided by using the proposed method. We found that eight parameters provide enough information for evaluation of the status of the soil microorganisms and, thus, for evaluation of the soil biological quality. The usage of rare parameters (potential respiration PR, ratio of potential and basal respiration PR/BR, biomass-specific potential respiration PR/C(bio), available organic carbon C(ext), and biomass-specific available organic carbon C(ext)/C(bio)) can be recommended, besides classical and well-known parameters (microbial biomass C(bio), basal respiration BR, metabolic coefficient qCO(2)). The combination of basal parameters and derived coefficients can also extend our knowledge about the condition of the soil microorganisms. In monitoring the case studies presented, we observed that soils evaluated to possess good biological quality displayed generally higher values of organic carbon, total nitrogen, clay, and cation exchange capacity. The soils of good biological quality can display higher levels of contaminants. This is probably related with the higher content of organic carbon and clay in these soils.     

Dioxin- and POP-contaminated sites—contemporary and future relevance and challenges

BACKGROUND, AIM AND SCOPE: Once they have been generated, polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and other persistent organic pollutants (POPs) can persist in soils and sediments and in waste repositories for periods extending from decades to centuries. In 1994, the US EPA concluded that contaminated sites and other reservoirs are likely to become the major source of contemporary pollution problems with these substances. With this in mind, this article is the first in a new series in ESPR under the title 'Case Studies on Dioxin and POP Contaminated Sites--Contemporary and Future Relevance and Challenges', which will address this important issue. The series will document various experiences from sites contaminated with PCDD/F and other POPs. This article provides an overview of the content of the articles comprising the series. In addition, it provides a review of the subject in its own right and identifies the key issues arising from dioxin/POP-contaminated sites. Additionally, it highlights the important conclusions that can be drawn from these examples. The key aim of this article and of the series as a whole is to provide a comprehensive overview of the types of PCDD/F contaminated sites that exist as a result of historical activities. It details the various processes whereby these sites became contaminated and attempts to evaluate their contemporary relevance as sources of PCDD/Fs and other POPs. It also details the various strategies used to assess these historical legacies of contamination and the concepts developed, or which are under development, to effect their remediation. MAIN FEATURES: Special sessions on 'Contaminated sites--Cases, remediation, risk and policy' were held at the DIOXIN conferences in 2006 and 2007, and this theme will be continued at DIOXIN 2008 to be held in Birmingham. Selected cases from the approximately 70 contributions made to these sessions, together with some additional invited case studies are outlined together with the key issues they raise. By evaluating these cases and adding details of experiences published in the current literature, an overview will be given of the different features and challenges of dioxin and POP-contaminated sites. RESULTS: This article provides a systematic categorisation of types of PCDD/F and POP-contaminated sites. These are categorised according to the chemical or manufacturing process, which generated the PCDD/Fs or POPs and also includes the use and disposal aspects of the product life cycle in question. The highest historical PCDD/F and dioxin-like polychlorinated biphenyl (PCB) contamination burdens have arisen as a result of the production of chlorine and of chlorinated organic chemicals. In particular, the production of chlorinated pesticides, PCBs and the related contaminated waste streams are identified being responsible for historical releases of toxic equivalents (TEQs) at a scale of many tonnes. Along with such releases, major PCDD/F contaminated sites have been created through the application or improper disposal of contaminated pesticides, PCBs and other organochlorine chemicals, as well through the recycling of wastes and their attempted destruction. In some extreme examples, PCDD/F contaminated sites have also resulted from thermal processes such as waste incinerators, secondary metal industries or from the recycling or deposition of specific waste (e.g. electronic waste or car shredder wastes), which often contain chlorinated or brominated organic chemicals. The examples of PCDD/F and dioxin-like PCB contamination of fish in European rivers or the impact of contaminated sites upon fishing grounds and upon other food resources demonstrate the relevance of these historical problems to current and future human generations. Many of the recent food contamination problems that have emerged in Europe and elsewhere demonstrate how PCDD/F and dioxin like PCBs from historical sources can directly contaminate human and animal feedstuffs and indeed highlight their considerable contemporary relevance in this respect. Accordingly, some key experiences and lessons learnt regarding the production, use, disposal and remediation of POPs from the contaminated sites are summarised. DISCUSSION: An important criterion for evaluating the significance and risks of PCDD/Fs and other POPs at contaminated sites is their present or future potential for mobility. This, in turn, determines to a large degree their propensity for off-site transport and environmental accessibility. The detailed evaluation of contaminated site cases reveals different site-specific factors, which influence the varied pathways through which poor water-soluble POPs can be mobilised. Co-contaminants with greater water solubility are also typically present at such sites. Hence, pumping of groundwater (pump and treat) is often required in addition to attempting to physically secure a site. At an increasing number of contaminated sites, securing measures are failing after relatively short time spans compared to the time horizon, which applies to persistent organic pollutant contamination. Due to the immense costs and challenges associated with remediation of contaminated sites 'monitored natural attenuation' is increasingly gaining purchase as a conceptual remediation approach. However, these concepts may well prove limited in their practical application to contaminated sites containing persistent organic pollutants and other key pollutants like heavy metals. CONCLUSIONS: It is inevitable, therefore, that dioxin/POP-contaminated sites will remain of contemporary and future relevance. They will continue to represent an environmental issue for future generations to address. The securing and/or remediation of dioxin/POP-contaminated sites is very costly, generally in the order of tens or hundreds of millions of dollars. Secured landfills and secured production sites need to be considered as constructions not made for 'eternity' but built for a finite time scale. Accordingly, they will need to be controlled, supervised and potentially repaired/renewed. Furthermore, the leachates and groundwater impacted by these sites will require ongoing monitoring and potential further remediation. These activities result in high maintenance costs, which are accrued for decades or centuries and should, therefore, be compared to the fully sustainable option of complete remediation. The contaminated site case studies highlight that, while extensive policies and established funds for remediation exist in most of the industrialised western countries, even these relatively well-regulated and wealthy countries face significant challenges in the implementation of a remediation strategy. This highlights the fact that ultimately only the prevention of contaminated sites represents a sustainable solution for the future and that the Polluter Pays Principle needs to be applied in a comprehensive way to current problems and those which may emerge in the future. RECOMMENDATIONS AND PERSPECTIVES: With the continuing shift of industrial activities in developing and transition economies, which often have poor regulation (and weak self-regulation of industries), additional global challenges regarding POPs and other contaminated sites may be expected. In this respect, a comprehensive application of the "polluter pays principle" in these countries will also be a key to facilitate the clean-up of contaminated areas and the prevention of future contaminated sites. The threats and challenges of contaminated sites and the high costs of securing/remediating the problems highlight the need for a comprehensive approach based upon integrated pollution prevention and control. If applied to all polluting (and potentially polluting) industrial sectors around the globe, such an approach will prove to be both the cheapest and most sustainable way to underpin the development of industries in developing and transition economies.